***Team Durango DEX210 RTR***
#1
***Team Durango DEX210 RTR***
$old
Great starter/kid's buggy here. Bought from the forum but ended buying a different setup. Race tested DEX210 plus brand new Team Durango electronics from a DEST210R RTR..
$old shipped. CONUS only.
Mostly stock. Upgraded TD Aluminum steering rack and aluminum rear hex's.
Diff was just rebuilt but needs to be broken in and set depending on track. Slipper too obviously.
Comes with a bunch of parts and bonus goodies. Missing Mid-Motor parts
I can make this race ready and near bulletproof for an addition cost of course.
Carbon Fiber shock towers
Aluminum RF hanger
Treat the tires as a throw in. May need to be reglued and some have a bit or wear.
What you see is what you get. May throw in extra parts if I can find them. I'm missing a pic of the electronics. Will add that tonight.
Comes with roller:
NIP:
TD330157 big bore shock pistons
TD330340 hub & knuckle insert
TD330474 Front axle
TD310253 drife shaft 65 mm
TD330141 front light blue shock springs
TD310257 Gearbox set
PTK-2003 protek Ceramic diff balls
U3704 Schumacher Thrust Bearing
Used/Loose parts:
2 sets Front arms
1 set rear arms
5 Front Shock Towers
5 Rear Shock Towers
4 sets Rear hubs
RW 81 spur
TD 87 spur
Extra motor plate
4 bodies.
- Stock(Holes were moved for a +10 chassis.
- TD +8 Body
- Finnisher
- Finnisher clear. Already cut for stock chassis.
Cracked Dimec 20 +8 Chassis. Using a rear skidplate should salvage this. Wrong screw was used by the previous owner.
Great starter/kid's buggy here. Bought from the forum but ended buying a different setup. Race tested DEX210 plus brand new Team Durango electronics from a DEST210R RTR..
$old shipped. CONUS only.
Mostly stock. Upgraded TD Aluminum steering rack and aluminum rear hex's.
Diff was just rebuilt but needs to be broken in and set depending on track. Slipper too obviously.
Comes with a bunch of parts and bonus goodies. Missing Mid-Motor parts
I can make this race ready and near bulletproof for an addition cost of course.
Carbon Fiber shock towers
Aluminum RF hanger
Treat the tires as a throw in. May need to be reglued and some have a bit or wear.
What you see is what you get. May throw in extra parts if I can find them. I'm missing a pic of the electronics. Will add that tonight.
Comes with roller:
NIP:
TD330157 big bore shock pistons
TD330340 hub & knuckle insert
TD330474 Front axle
TD310253 drife shaft 65 mm
TD330141 front light blue shock springs
TD310257 Gearbox set
PTK-2003 protek Ceramic diff balls
U3704 Schumacher Thrust Bearing
Used/Loose parts:
2 sets Front arms
1 set rear arms
5 Front Shock Towers
5 Rear Shock Towers
4 sets Rear hubs
RW 81 spur
TD 87 spur
Extra motor plate
4 bodies.
- Stock(Holes were moved for a +10 chassis.
- TD +8 Body
- Finnisher
- Finnisher clear. Already cut for stock chassis.
Cracked Dimec 20 +8 Chassis. Using a rear skidplate should salvage this. Wrong screw was used by the previous owner.
Last edited by shagino; 05-20-2013 at 08:54 AM.
#2
bump for a great guy