USED KYOSHO RB5 WITH EXTENDED CHASSIS + PARTS LOT
#1
USED KYOSHO RB5 WITH EXTENDED CHASSIS + PARTS LOT
This is a lot for the following
1. Used Kyosho RB5 1/10 2WD BUGGY
2. RB5 Parts Lot
Here's info on the following
The RB5 was ran and rebuilt many times for around a year or so. The parts are pretty solid and not that sloppy at all. It features a + 6mm chassis I made using a mill, glued, and reinforced with carbon fiber and plastic. The chassis is pretty solid and shouldn't brake unless you attempt to run it straight into a wall,etc. The car features the following upgrades:
1. Big Bore shocks with 6 hole pistons and WC Kit springs (similar to red/pink X-Gear springs
2. Tungsten Carbide diff balls
3. Old style RB5SP style front end (the best overall setup)
4. Carbon fiber hand made battery brace and aluminum axle battery holddowns
5. New stiffer steering assembly
6. Lightweight milled motor plate
7. New style front axle
8. New style slipper
9. Aluminum drive hex hubs
The parts lot contains various spares including: spare standard length chassis, arms (various types), slipper parts, shock towers, ball ends, plastic parts, and more
In order to run this vehicle you will need a motor, body, pinion gear, servo, mounted tires, receiver, battery, and wing.
Selling for $170 plus postage.
Please don't message me through rctech, as I am less likely to respond quickly. Please email [email protected] if interested.
1. Used Kyosho RB5 1/10 2WD BUGGY
2. RB5 Parts Lot
Here's info on the following
The RB5 was ran and rebuilt many times for around a year or so. The parts are pretty solid and not that sloppy at all. It features a + 6mm chassis I made using a mill, glued, and reinforced with carbon fiber and plastic. The chassis is pretty solid and shouldn't brake unless you attempt to run it straight into a wall,etc. The car features the following upgrades:
1. Big Bore shocks with 6 hole pistons and WC Kit springs (similar to red/pink X-Gear springs
2. Tungsten Carbide diff balls
3. Old style RB5SP style front end (the best overall setup)
4. Carbon fiber hand made battery brace and aluminum axle battery holddowns
5. New stiffer steering assembly
6. Lightweight milled motor plate
7. New style front axle
8. New style slipper
9. Aluminum drive hex hubs
The parts lot contains various spares including: spare standard length chassis, arms (various types), slipper parts, shock towers, ball ends, plastic parts, and more
In order to run this vehicle you will need a motor, body, pinion gear, servo, mounted tires, receiver, battery, and wing.
Selling for $170 plus postage.
Please don't message me through rctech, as I am less likely to respond quickly. Please email [email protected] if interested.