MTX4
06-06-2012, 05:38 AM
#1
MTX4
MTX4 with R upgrades. The car has the optional (thicker) chassis plus the standard chassis and motor mount. Includes spare arms, belts, axles, bearings, gears, axles, bumper, sway bars….extra diffs/one-way/spool -everything you need to dial it in and keep you running. 2 good KO servos (2174/2143) and nimh battery. The included engine should be considered a practice engine, the piston/sleeve was pinched, still tight and still needs to be broken in again.
Car has universal axles front and rear - these have some wear but are in good condition
SOLD
[email protected]
Add a purple Mugen staterbox for $50 (no battery).
Car has universal axles front and rear - these have some wear but are in good condition
SOLD
[email protected]
Add a purple Mugen staterbox for $50 (no battery).
Last edited by ralph m; 07-26-2012 at 06:53 AM.
06-12-2012, 11:17 AM
#2
Any reasonable offers?
06-13-2012, 05:22 PM
#3
Now $275 shipped. Here is a list of the included parts....
new spares:
Belts –front, rear and side
Front bumper
Front upper arms
Front lower arms (2 sets)
Front uprights (2 sets)
Rear uprights
Rear lower arms
Rear lower hinge pins
Rear lower arm mounts
Rear upper arm mount
53 tooth spur (2)
59 tooth spur
23 tooth pinion
2.1 rear roll bar
2.3 rear roll bar
2.2 rear roll bar (on car)
Front drive shafts for universal (one set and 1 extra)
Front joint cups (one set and one extra)
f/r drive shafts (dog bones)
f/r axle shafts (for dog bones)
12 pcs 10 x 15 bearings
Tuning parts:
Front one way
Front spool
Spare rear diff
Spare pulleys (and optional front side pulley)
Spare diff gear set and gaskets
stock stuff:
Stock chassis and motor mount (optional thick chassis on car)
Stock 2speed shaft (hollow shaft on car)
Stock brake disk and oads (ventilated disk on car)
Plastic servo mount (kit)
All the standard axles and dog bones
new spares:
Belts –front, rear and side
Front bumper
Front upper arms
Front lower arms (2 sets)
Front uprights (2 sets)
Rear uprights
Rear lower arms
Rear lower hinge pins
Rear lower arm mounts
Rear upper arm mount
53 tooth spur (2)
59 tooth spur
23 tooth pinion
2.1 rear roll bar
2.3 rear roll bar
2.2 rear roll bar (on car)
Front drive shafts for universal (one set and 1 extra)
Front joint cups (one set and one extra)
f/r drive shafts (dog bones)
f/r axle shafts (for dog bones)
12 pcs 10 x 15 bearings
Tuning parts:
Front one way
Front spool
Spare rear diff
Spare pulleys (and optional front side pulley)
Spare diff gear set and gaskets
stock stuff:
Stock chassis and motor mount (optional thick chassis on car)
Stock 2speed shaft (hollow shaft on car)
Stock brake disk and oads (ventilated disk on car)
Plastic servo mount (kit)
All the standard axles and dog bones
Last edited by ralph m; 06-13-2012 at 08:25 PM.
06-13-2012, 08:27 PM
#4
updated listing with specific spares...
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
