F/S Skycharger B6AC+
05-06-2012, 02:10 PM
#1
F/S Skycharger B6AC+
For sale is a Skycharger B6AC+ Used maybe 3 times.
A deans connector plug has been added.
For sale price $45 shipped 48 US
here is some info copied from their website:
With an extremely low price, this is also one of the highest quality r/c battery charger you will ever find on the internet which also has USB PC monitor software to perfectly charge all your batteries. Dual power and multi-functional, the Sky Charger B6AC+ can charge 1-6 LiPo, A123 Li-Fe, NiMH and NiCD, Li-ion and PB batteries! The Sky Charger B6AC+ also features microprocessor controlled, high-power and high-performance circuit, maximum safety with delta-peak sensitivity, capacity limit, processing time limit, input power monitor, temperature limit and also monitoring the voltage of individual cell. Best of all, this charger also comes with everything such as power cord, charging clips/adaptors and everything you need to get started! Great for RC beginners!!!
For the advanced user, the Sky Charger includes a PC based program that can analyze and monitor the characteristic of the battery through the computers USB port. The software will graph voltage, current, capacity and temperature curves. It also shows the individual voltages of each cell in the Lithium battery pack. When charging or discharging, the Sky Charger offers an AUTO function that sets the feeding current or the cell count of the Lithium battery automatically. For Lithium batteries, this can prevent an over-charging situation which can lead to an explosion should the user not set the program correctly. Every program in the unit is programmed with safety monitoring to validate the user information to ensure maximum safety. These parameters can be set by the user. The Sky Charger also can monitor and balance individual cells of the Lithium battery pack during the discharge process, as well as the charge process. If the voltage of any one cell varies abnormally, the process will be stopped with the error message. Includes AC Charger
Special Features
Optimized operating software B6AC+ features the so-called AUTO function that set the feeding current during the process of charging or discharging. Especially for Lithium batteries, it can prevent the overcharging which may lead to an explosion due to the user's fault. It can disconnect the circuit automatically and alarm once detecting any malfunction. All the programs of this product were controlled through two way linkage and communication, to achieve the maximum safety and minimize the trouble. All the settings can be configured by users!
Internal independent lithium battery balancer
B6AC+ employs an individual-cell-voltage balancer. It isn t necessary to connect an external balancer for balance charging.
Balancing individual cells battery discharging
During the process of discharging, B6AC+ can monitor and balance each cell of the battery individually. Error message will be indicated and the process will be ended automatically if the voltage of any single one cell is abnormal.
Adaptable to various type of lithium battery
B6AC+ is adaptable to various types of Lithium batteries, such as Li-ion, LiPo and the new LiFe series of batteries.
Fast and storage mode of lithium battery
Purposes to charge Lithium battery varies, �fast� charge reduce the duration of charging whereas �store� state can control the final voltage of your battery, so as to store for a long time and protect useful time of the battery.
Maximum safety
Delta-peak sensitivity: The automatic charge termination program based on the principle of the Delta-peak voltage detection. When the battery's voltage exceeds the threshold, the process will be terminated automatically.
Automatic charging current limit
You can set up the upper limit of the charging current when charging your NiCd or NiMH battery; it is useful for the NiMH battery of low impedance and capacity in the 'AUTO' charging mode.
Capacity limit
The charging capacity is always calculated as the charging current multiplied by time. If the charging capacity exceeds the limit, the process will be terminated automatically when you set the maximum value.
Temperature threshold*
The battery�s internal chemical reaction will cause the temperature of the battery to rise. If the temperature limit is reached, the process will be terminated.
*This function is available by connecting optional temperature probe, which is not included in our package.
Processing time limit:
You can also limit the maximum process time to avoid any possible defect.
Input power monitoring
To protect the car battery used as DC input power from being damaged, its voltage keeps being monitored. If it drops below the lower limit, the process will be ended automatically.
Data store/load
The maximum five batteries�data can be stored for users�convenience. You can keep the data pertaining to program setting of the battery of continuous charging or discharging. Users can call out these data at any time without any special program setting.
Cyclic charging/discharging
1 to 5 cyclic and continuous process of charge>discharge or discharge>charge is operable for battery refreshing and Balancing to stimulate the battery�s activity.
A deans connector plug has been added.
For sale price $45 shipped 48 US
here is some info copied from their website:
With an extremely low price, this is also one of the highest quality r/c battery charger you will ever find on the internet which also has USB PC monitor software to perfectly charge all your batteries. Dual power and multi-functional, the Sky Charger B6AC+ can charge 1-6 LiPo, A123 Li-Fe, NiMH and NiCD, Li-ion and PB batteries! The Sky Charger B6AC+ also features microprocessor controlled, high-power and high-performance circuit, maximum safety with delta-peak sensitivity, capacity limit, processing time limit, input power monitor, temperature limit and also monitoring the voltage of individual cell. Best of all, this charger also comes with everything such as power cord, charging clips/adaptors and everything you need to get started! Great for RC beginners!!!
For the advanced user, the Sky Charger includes a PC based program that can analyze and monitor the characteristic of the battery through the computers USB port. The software will graph voltage, current, capacity and temperature curves. It also shows the individual voltages of each cell in the Lithium battery pack. When charging or discharging, the Sky Charger offers an AUTO function that sets the feeding current or the cell count of the Lithium battery automatically. For Lithium batteries, this can prevent an over-charging situation which can lead to an explosion should the user not set the program correctly. Every program in the unit is programmed with safety monitoring to validate the user information to ensure maximum safety. These parameters can be set by the user. The Sky Charger also can monitor and balance individual cells of the Lithium battery pack during the discharge process, as well as the charge process. If the voltage of any one cell varies abnormally, the process will be stopped with the error message. Includes AC Charger
Special Features
Optimized operating software B6AC+ features the so-called AUTO function that set the feeding current during the process of charging or discharging. Especially for Lithium batteries, it can prevent the overcharging which may lead to an explosion due to the user's fault. It can disconnect the circuit automatically and alarm once detecting any malfunction. All the programs of this product were controlled through two way linkage and communication, to achieve the maximum safety and minimize the trouble. All the settings can be configured by users!
Internal independent lithium battery balancer
B6AC+ employs an individual-cell-voltage balancer. It isn t necessary to connect an external balancer for balance charging.
Balancing individual cells battery discharging
During the process of discharging, B6AC+ can monitor and balance each cell of the battery individually. Error message will be indicated and the process will be ended automatically if the voltage of any single one cell is abnormal.
Adaptable to various type of lithium battery
B6AC+ is adaptable to various types of Lithium batteries, such as Li-ion, LiPo and the new LiFe series of batteries.
Fast and storage mode of lithium battery
Purposes to charge Lithium battery varies, �fast� charge reduce the duration of charging whereas �store� state can control the final voltage of your battery, so as to store for a long time and protect useful time of the battery.
Maximum safety
Delta-peak sensitivity: The automatic charge termination program based on the principle of the Delta-peak voltage detection. When the battery's voltage exceeds the threshold, the process will be terminated automatically.
Automatic charging current limit
You can set up the upper limit of the charging current when charging your NiCd or NiMH battery; it is useful for the NiMH battery of low impedance and capacity in the 'AUTO' charging mode.
Capacity limit
The charging capacity is always calculated as the charging current multiplied by time. If the charging capacity exceeds the limit, the process will be terminated automatically when you set the maximum value.
Temperature threshold*
The battery�s internal chemical reaction will cause the temperature of the battery to rise. If the temperature limit is reached, the process will be terminated.
*This function is available by connecting optional temperature probe, which is not included in our package.
Processing time limit:
You can also limit the maximum process time to avoid any possible defect.
Input power monitoring
To protect the car battery used as DC input power from being damaged, its voltage keeps being monitored. If it drops below the lower limit, the process will be ended automatically.
Data store/load
The maximum five batteries�data can be stored for users�convenience. You can keep the data pertaining to program setting of the battery of continuous charging or discharging. Users can call out these data at any time without any special program setting.
Cyclic charging/discharging
1 to 5 cyclic and continuous process of charge>discharge or discharge>charge is operable for battery refreshing and Balancing to stimulate the battery�s activity.
05-07-2012, 01:10 PM
#2
bump
05-08-2012, 02:26 PM
#3
bump
05-09-2012, 10:59 PM
#4
bump
05-10-2012, 02:01 PM
#5
bump
05-15-2012, 02:12 AM
#6
bump
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
