FS Losi XXX-SCT with TLR hop ups
#1
FS Losi XXX-SCT with TLR hop ups
I'm shifting to 4WD and can't run more than one class so out goes my trusty xxx-sct. It's been a great race truck, the best 2wd I've owned. Raced on carpet so not dirty, but the body has normal cracking around the front wheel wells and at the back of the body but still totally usable.
Comes with the following hop ups
1. Ball diff
2. Threaded shocks with Ti-nitride shock shafts
3. STRC rear bulkhead
4. STRC rear carriers. I believe 0 or 0.5. Honestly, I don't remember.
Tires included are 1 pair rear AKA gridirons with lots of tread, 1 pair front AKA wishbones and 1 pair stock Losi Eclipse
There are 3 "issues". 1. The battery plate (above the servo) has one screw that the top stripped so I used a drill to loosen it to where the plate can spin when the other 3 screw are taken out so the servo can be switched etc. It's not a functional issue but I like to put everything on the table 2. The mudflaps have 1 hole on each broken but 1 still good and 3. 1 nerf bar mount hole cracked (not the chassis aside from the hole) but doesn't affect the truck other than the nerf bar is a little loose.
Looking for $165 shipped in con US as a roller or a Losi 22 roller or Losi XXX-CR ARTR for trades.
The cracked hole
Aluminum bulkhead
Aluminum carriers
Comes with the following hop ups
1. Ball diff
2. Threaded shocks with Ti-nitride shock shafts
3. STRC rear bulkhead
4. STRC rear carriers. I believe 0 or 0.5. Honestly, I don't remember.
Tires included are 1 pair rear AKA gridirons with lots of tread, 1 pair front AKA wishbones and 1 pair stock Losi Eclipse
There are 3 "issues". 1. The battery plate (above the servo) has one screw that the top stripped so I used a drill to loosen it to where the plate can spin when the other 3 screw are taken out so the servo can be switched etc. It's not a functional issue but I like to put everything on the table 2. The mudflaps have 1 hole on each broken but 1 still good and 3. 1 nerf bar mount hole cracked (not the chassis aside from the hole) but doesn't affect the truck other than the nerf bar is a little loose.
Looking for $165 shipped in con US as a roller or a Losi 22 roller or Losi XXX-CR ARTR for trades.
The cracked hole
Aluminum bulkhead
Aluminum carriers
Last edited by scottgir; 04-10-2012 at 01:42 PM.