Hot Bodies D8, Tekno V4, Tekin Rx8/1900kv BNIB
#1
Hot Bodies D8, Tekno V4, Tekin Rx8/1900kv BNIB
Up for sale is a Hot Bodies D8 that had Minimal run time.
comes with the following:
Tekno V4 Coversion (assembled but never run)
Tekno Elektri-clutch
Instructions for Tekno kit and all parts
Motor Mount that fits Tekin Motor
stickers that came with the kit
Electric Motor System
Tekin Rx8 & 1900kV motor (BNIB, never soldered)
includes the manual and other stuff that came from factory.
also includes:
extra wet noodle 12 gauge wire
3 sets of 4mm castle high current bullet connectors (esc to motor)
10 e-flight ec3 connectors to solder up your packs
Bodies
1 used body (still in great condition)
Brand New Hara Edition Lid & Decal Sheet (unpainted)
Brand New Hara Edition Wing & stay (never mounted)
2- extra rear suspension arms
1- extra front suspension arms
Extra shock parts
4 shock bodies
4 shock shafts
2 gray springs
2 white springs
Miscellaneous
4 mounted AKA Crossbrace 99% tread(one has a slight crack, still runs fine)
Nitro parts:
-original D8 chassis tray (in excellent condition)
-nitro motor mount
here is the d8 as a nitro roller- Ran Nitro for 1 afternoon at the track before deciding to convert.
Tekin System - Rx8 & 1900kV- still bnib
Tekin Sys., Wire & Connectors
Tekno V4 Conversion Built but never ran
Hara Body, Wing & stay
Extra Arms & Shock parts
Nitro Parts - you can see from the bottom of the chassis tray, run only 1 afternoon.
body
Tires
and the rest of the parts:
2- 4 pack 8mm x 16mm bearings
1- spare pinion
1- spare ring gear
1- flywheel, collet, clutch shoes, springs, bearings & clutch bell
1- air filter
** misc parts
Price - $625.00 shipped to Conusa
outside of conusa 625.00 does not include shipping.
PS. I am relatively new here, but you can pm me for links to my 100 % satisfactory rating on ebay & other forums, thx for looking
comes with the following:
Tekno V4 Coversion (assembled but never run)
Tekno Elektri-clutch
Instructions for Tekno kit and all parts
Motor Mount that fits Tekin Motor
stickers that came with the kit
Electric Motor System
Tekin Rx8 & 1900kV motor (BNIB, never soldered)
includes the manual and other stuff that came from factory.
also includes:
extra wet noodle 12 gauge wire
3 sets of 4mm castle high current bullet connectors (esc to motor)
10 e-flight ec3 connectors to solder up your packs
Bodies
1 used body (still in great condition)
Brand New Hara Edition Lid & Decal Sheet (unpainted)
Brand New Hara Edition Wing & stay (never mounted)
2- extra rear suspension arms
1- extra front suspension arms
Extra shock parts
4 shock bodies
4 shock shafts
2 gray springs
2 white springs
Miscellaneous
4 mounted AKA Crossbrace 99% tread(one has a slight crack, still runs fine)
Nitro parts:
-original D8 chassis tray (in excellent condition)
-nitro motor mount
here is the d8 as a nitro roller- Ran Nitro for 1 afternoon at the track before deciding to convert.
Tekin System - Rx8 & 1900kV- still bnib
Tekin Sys., Wire & Connectors
Tekno V4 Conversion Built but never ran
Hara Body, Wing & stay
Extra Arms & Shock parts
Nitro Parts - you can see from the bottom of the chassis tray, run only 1 afternoon.
body
Tires
and the rest of the parts:
2- 4 pack 8mm x 16mm bearings
1- spare pinion
1- spare ring gear
1- flywheel, collet, clutch shoes, springs, bearings & clutch bell
1- air filter
** misc parts
Price - $625.00 shipped to Conusa
outside of conusa 625.00 does not include shipping.
PS. I am relatively new here, but you can pm me for links to my 100 % satisfactory rating on ebay & other forums, thx for looking
#2
all pms replied guys, thanks.
#3
ygpm
#4
all pm's replied guys.
thx
thx
#5
thanks guys, all pm's repllied.
dont need to split it up at this time.
dont need to split it up at this time.
Last edited by savagenitroflux; 04-19-2011 at 10:51 AM.
#6
i also have an ACE DS 1015 (used) that will go with this sale .
#7
PP SENT
PAYMENT SENT
#8
Sold
packaging now & shipping today
packaging now & shipping today