losi xxxs g+ w rare upgrades and extras!!!
10-20-2010, 05:05 PM
#1
losi xxxs g+ w rare upgrades and extras!!!
SOLDDDDDDDDDDDDD!!!!!! electric race chassis. My personal car used for RCGT and VTA class racing. In fantastic condition and has numerous very hard to get Trinity Matt Francis parts. This would make a fantastic first electric touring car for any one wishing to get the most bang for their buck !!!
The chassis is in great shape and was always cleaned and re-lubed before each race day. It has minimal scratches on the bottom and has no cracks or major damage. It is very clean !
Matt Francis alloy parts are hard to find already but this car has some that are almost impossible to get. It took me 2 years to find whats included. A description of all options follows.
Front: Clear upper bumper brace. Losi front swaybar set (all 4), MF red alloy upper shock spacers, MF red alloy shock collars, Xtreme Silver graphite shock tower, IRS pin cushions on alloy Losi axles, MF red alloy front and rear roll center blocks w/spacers, MF red alloy spindles, Standard Lunsford turnbuckles with red ball cups
Center: MF alloy steering arms, MF red alloy servo mounts, VERY RARE MF red alloy motor mount, MF red alloy motor mount cap, MF red alloy spur gear adaptor(allows use of any standard 48p or 64p spur gear(100t 64p mounted on car).
Rear: Losi rear swaybar set (all 3), MF red alloy upper shock spacers, MF red alloy shock collars, Xtreme Silver graphite shock tower, IRS pin cushions on alloy Losi axles, MF red alloy front and rear roll center blocks w/spacers, Lunsford turnbuckles with red ball cups.
In addition, I've included numerous spare parts: new front bumper,bumper mount, 4 new graphite front arms, stock front (both high and low mount) graphite roll center blocks, set of 0 degree front uprights(4degree mounted on car)stock graphite servo mounts, 1 pair 0 degree and 1 pair of 1 degree rear uprights (1/2 degree mounted on car), 4 new graphite rear arms, stock rear (both high and low mount)graphite roll center blocks,rear bumper, Dynamite alloy hub adaptors, Dynamite motor plate and Heatsink, 1 Losi ONE-WAY diff complete, 1 IRS red alloy spool, An almost complete set of Losi shock springs (missing long orange springs), An almost complete set of stainless screws (chassis already has them), 1 set of 1 race old CS27 mounted racing tires, 1 set 1 race old RP36 mounted racing tires, 1 set of 1 race old HPI x-pattern tires mounted on HPI Werk rims(3 degree and 6 degree offset), Custom painted HPI 200mm Mercedes Benz DTM body cut and drilled for this chassis with Tamiya rear plastic wing.
The original box, manual, copies of almost every race setup available and some articles by the pros will also be included.
This is enough for ANYONE to get racing quickly, have plenty of support information and own some truly functional collectible parts.
If you need any further information or would like additional photos, please ask !!
will let this go for 250 shipped!dont wait on this one!!there is much more than that invested in half these parts alone!!!!
The chassis is in great shape and was always cleaned and re-lubed before each race day. It has minimal scratches on the bottom and has no cracks or major damage. It is very clean !
Matt Francis alloy parts are hard to find already but this car has some that are almost impossible to get. It took me 2 years to find whats included. A description of all options follows.
Front: Clear upper bumper brace. Losi front swaybar set (all 4), MF red alloy upper shock spacers, MF red alloy shock collars, Xtreme Silver graphite shock tower, IRS pin cushions on alloy Losi axles, MF red alloy front and rear roll center blocks w/spacers, MF red alloy spindles, Standard Lunsford turnbuckles with red ball cups
Center: MF alloy steering arms, MF red alloy servo mounts, VERY RARE MF red alloy motor mount, MF red alloy motor mount cap, MF red alloy spur gear adaptor(allows use of any standard 48p or 64p spur gear(100t 64p mounted on car).
Rear: Losi rear swaybar set (all 3), MF red alloy upper shock spacers, MF red alloy shock collars, Xtreme Silver graphite shock tower, IRS pin cushions on alloy Losi axles, MF red alloy front and rear roll center blocks w/spacers, Lunsford turnbuckles with red ball cups.
In addition, I've included numerous spare parts: new front bumper,bumper mount, 4 new graphite front arms, stock front (both high and low mount) graphite roll center blocks, set of 0 degree front uprights(4degree mounted on car)stock graphite servo mounts, 1 pair 0 degree and 1 pair of 1 degree rear uprights (1/2 degree mounted on car), 4 new graphite rear arms, stock rear (both high and low mount)graphite roll center blocks,rear bumper, Dynamite alloy hub adaptors, Dynamite motor plate and Heatsink, 1 Losi ONE-WAY diff complete, 1 IRS red alloy spool, An almost complete set of Losi shock springs (missing long orange springs), An almost complete set of stainless screws (chassis already has them), 1 set of 1 race old CS27 mounted racing tires, 1 set 1 race old RP36 mounted racing tires, 1 set of 1 race old HPI x-pattern tires mounted on HPI Werk rims(3 degree and 6 degree offset), Custom painted HPI 200mm Mercedes Benz DTM body cut and drilled for this chassis with Tamiya rear plastic wing.
The original box, manual, copies of almost every race setup available and some articles by the pros will also be included.
This is enough for ANYONE to get racing quickly, have plenty of support information and own some truly functional collectible parts.
If you need any further information or would like additional photos, please ask !!
will let this go for 250 shipped!dont wait on this one!!there is much more than that invested in half these parts alone!!!!
Last edited by jzmoney; 10-28-2010 at 06:13 PM. Reason: sold
10-21-2010, 11:37 AM
#2
Ttt
10-23-2010, 12:26 PM
#3
bump
10-24-2010, 05:49 PM
#4
ttt
10-26-2010, 03:07 PM
#5
ttt
10-27-2010, 07:15 PM
#6
^^^
10-28-2010, 06:13 PM
#7
sold!!!!!!
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
