Diggity Designs XLR8 TC3, Mamba Max Pro, Novak, tons more
04-19-2010, 08:46 PM
#1
Diggity Designs XLR8 TC3, Mamba Max Pro, Novak, tons more
SOLD
ROLLER: Diggity Designs XLR8 v1 TC3 conversion kit, all carbon fiber and alloy, titanium turnbuckles, ceramic diff balls, RC-Monster battery tray, AE alloy threaded shocks, all brand new, never run. XLR8 kit: http://diggitydesigns.com/D3_OnRoad_..._XLR8_Kit.html
SERVO: Associated SHV1504MG servo, 7.4V capable, brand new, bench tested to make sure it works.
BODIES: Dodge (used in fair condition), 350Z (used in excellent condition), and stock TC4 (new-in-package)
WHEELS/TIRES: Stock TC3 premounts, stock TC3 tires, HPI Gumball Slicks, HPI spoke wheels, older used foams. Also just received some Integy radial tires, brand new, not shown in pics
TONS OF PARTS: Almost too much too list! AE spring set, BRP polished hingepins, 6 steel CVDs, RPM Variable Damping Kit, 4 IRS "Fatboy" alloy dogbones, IRS "Pincushions", 2 drive pinions, pack of shock O-rings, 2 packages of stub axles & rebuild kits, Losi alloy clamping hexes, block carrier bushings, VCS2 shock upgrade kit, JT Racing blue alloy C-hubs. Also includes all the stock parts from the donor car that weren't used, and a container of misc. parts: diff parts, gears, sway bars, ball ends/studs, and more! See pics for everything included.
OTHER: Diggity Designs XLR8 assembly manual, setup/tuning guidebook, and blank setup sheet.
TRADES: I will consider trades for a few specific things: 1/8 on-road GT body (Kyosho Inferno GT1, Ofna Ultra GTP, Ofna DM-1 Spec, Protoform PF8, etc.), High-end servos, 1/8 Tekin buggy motor, 1/8 ESC (Mamba Monster, Mamba Max Pro, Tekin RX8). Partial or full trade depending on value of item.
ROLLER: Diggity Designs XLR8 v1 TC3 conversion kit, all carbon fiber and alloy, titanium turnbuckles, ceramic diff balls, RC-Monster battery tray, AE alloy threaded shocks, all brand new, never run. XLR8 kit: http://diggitydesigns.com/D3_OnRoad_..._XLR8_Kit.html
SERVO: Associated SHV1504MG servo, 7.4V capable, brand new, bench tested to make sure it works.
BODIES: Dodge (used in fair condition), 350Z (used in excellent condition), and stock TC4 (new-in-package)
WHEELS/TIRES: Stock TC3 premounts, stock TC3 tires, HPI Gumball Slicks, HPI spoke wheels, older used foams. Also just received some Integy radial tires, brand new, not shown in pics
TONS OF PARTS: Almost too much too list! AE spring set, BRP polished hingepins, 6 steel CVDs, RPM Variable Damping Kit, 4 IRS "Fatboy" alloy dogbones, IRS "Pincushions", 2 drive pinions, pack of shock O-rings, 2 packages of stub axles & rebuild kits, Losi alloy clamping hexes, block carrier bushings, VCS2 shock upgrade kit, JT Racing blue alloy C-hubs. Also includes all the stock parts from the donor car that weren't used, and a container of misc. parts: diff parts, gears, sway bars, ball ends/studs, and more! See pics for everything included.
OTHER: Diggity Designs XLR8 assembly manual, setup/tuning guidebook, and blank setup sheet.
TRADES: I will consider trades for a few specific things: 1/8 on-road GT body (Kyosho Inferno GT1, Ofna Ultra GTP, Ofna DM-1 Spec, Protoform PF8, etc.), High-end servos, 1/8 Tekin buggy motor, 1/8 ESC (Mamba Monster, Mamba Max Pro, Tekin RX8). Partial or full trade depending on value of item.
Last edited by simplechamp; 02-09-2011 at 03:22 PM.
05-02-2010, 07:30 PM
#2
would you consider selling just the roller? Got good electronics and motors as well as a ton of parts.
05-18-2010, 03:52 AM
#3
Bump
06-10-2010, 05:21 PM
#4
Bump
06-11-2010, 01:08 PM
#5
Bump
06-12-2010, 08:29 PM
#6
Bump
06-12-2010, 09:52 PM
#7
Any interest in a nice upgraded ERevo roller? If so shoot me a PM.
06-13-2010, 04:32 PM
#8
Bump
Sorry Ride1226, just sold my E-Revo a little while ago.
Sorry Ride1226, just sold my E-Revo a little while ago.
06-15-2010, 04:07 PM
#9
Bump
06-16-2010, 02:59 PM
#10
Bump
06-17-2010, 06:18 PM
#11
Bump
06-18-2010, 06:03 PM
#12
Bump
06-20-2010, 05:46 PM
#13
Bump
06-22-2010, 08:08 PM
#14
Bump
06-23-2010, 03:25 PM
#15
Bump