Monster, Short Course BLITZ, Crawling, Onroad, escs, motors, something for everyone!!
03-10-2010, 10:37 PM
#1
Monster, Short Course BLITZ, Crawling, Onroad, escs, motors, something for everyone!!
I just need to widdle down the stuff in here to calm the wifey. Due to my blow out prices, all items will be "Plus Shipping" unless stated. Dont worry I will be more then reasonable on shipping prices. If you see something you like to do as a package price send me your price and I am sure we can work it out. PayPal ONLY. Lower 48 ONLY!!!
BLITZ very low use and UBER CLEAN!! There is some customizing done to lower the center of gravity of esc into the chassis and straps added....way nicer to change out packs at the track. ALL stock stuff will be included to make RTR. all stuff removed, instructions, radio, esc, RX, motor, stickers, extra parts that come with. The rear steering block has been replaced with a aluminum STRC ($25). $165 shipped BLITZ LOWERED TO $140 SHIPPED!!!!
I did not take pics of the RTR stuff but all only has one run. This rig has not had rear tranny apart only the rear block installed. Runs flawless!!
PICS of how I installed my ESC but any will work. Used sc10 battery foams.
Darksoul 1.9 COMP Beadlocks only used for Mock-up and rolled around the house for testing. Come with soft chisels with foams. GREAT crawler wheel/tire combo for your comp MRC!! These wheels are a great product that is out of production now. The black screws are starting to rust a little bit...does not hurt to replace with some stainless, but the wheels are beautiful. Weighted.
I only want $90 shipped for all with tires!!
http://www.darksoulracing.com/Crawler_Wheels.html
Darksoul 1.9 scaler wheels never been put together or mounted
SET OF 5 Wheels perfect for your Honcho or Scaler build!!
They do not have weights but I can send you the link on where to get them
$90 shipped
Savage Flux XL chassis plates. $25 shipped
Losi 40 series tires SET OF 4 NIB $30 shipped
Yokomo Vintage YR4M2....really nice condition. missing one old school battery hold. CF was covered and lifted on section to show the OG
undertray. The protector will take some clean up work. Everything As shown in picture only $85
Futaba FM radio $35
Olschool PIMP Hitec challenger-260 in mint condition $25
Flat RX pack for gassers....$10 New and unused
tekin fans NIB $11
http://www.amainhobbies.com/product_...rushless-Fan-2
Two Novak ESCs $40 for both only as pair
Vintage Kindwald Motor in really nice condition. $10
ESC in above PIc is a PRO Stock class esc that costs $130
I will take $50 OBO
Slipper Eliminator for drifting and oval. For T4/b4/sc10 $10 shipped
Match these RXs with a radio and lets make a good deal. or the xxl for $20 may need a new antennea soldered. No biggie. there is one on there but I believe there is a fixed break in it. Like this when I got it but works. The other two can go with a radio for free.
BLITZ very low use and UBER CLEAN!! There is some customizing done to lower the center of gravity of esc into the chassis and straps added....way nicer to change out packs at the track. ALL stock stuff will be included to make RTR. all stuff removed, instructions, radio, esc, RX, motor, stickers, extra parts that come with. The rear steering block has been replaced with a aluminum STRC ($25). $165 shipped BLITZ LOWERED TO $140 SHIPPED!!!!
I did not take pics of the RTR stuff but all only has one run. This rig has not had rear tranny apart only the rear block installed. Runs flawless!!
PICS of how I installed my ESC but any will work. Used sc10 battery foams.
Darksoul 1.9 COMP Beadlocks only used for Mock-up and rolled around the house for testing. Come with soft chisels with foams. GREAT crawler wheel/tire combo for your comp MRC!! These wheels are a great product that is out of production now. The black screws are starting to rust a little bit...does not hurt to replace with some stainless, but the wheels are beautiful. Weighted.
I only want $90 shipped for all with tires!!
http://www.darksoulracing.com/Crawler_Wheels.html
Darksoul 1.9 scaler wheels never been put together or mounted
SET OF 5 Wheels perfect for your Honcho or Scaler build!!
They do not have weights but I can send you the link on where to get them
$90 shipped
Savage Flux XL chassis plates. $25 shipped
Losi 40 series tires SET OF 4 NIB $30 shipped
Yokomo Vintage YR4M2....really nice condition. missing one old school battery hold. CF was covered and lifted on section to show the OG
undertray. The protector will take some clean up work. Everything As shown in picture only $85
Futaba FM radio $35
Olschool PIMP Hitec challenger-260 in mint condition $25
Flat RX pack for gassers....$10 New and unused
tekin fans NIB $11
http://www.amainhobbies.com/product_...rushless-Fan-2
Two Novak ESCs $40 for both only as pair
Vintage Kindwald Motor in really nice condition. $10
ESC in above PIc is a PRO Stock class esc that costs $130
I will take $50 OBO
Slipper Eliminator for drifting and oval. For T4/b4/sc10 $10 shipped
Match these RXs with a radio and lets make a good deal. or the xxl for $20 may need a new antennea soldered. No biggie. there is one on there but I believe there is a fixed break in it. Like this when I got it but works. The other two can go with a radio for free.
Last edited by Paul Whalen; 03-12-2010 at 07:19 AM.
03-11-2010, 05:05 AM
#2
Good guy to do business with. Are the Darksoul wheels aluminum?
03-11-2010, 06:57 AM
#3
yes the darksouls are aluminum, the inside ring is plastic is all to help hold the bead better. ty for the vouch.
03-11-2010, 07:54 AM
#5
PM me what you had in mind...It is the most durable SC truck out there in its class. Im just on a crawling kick atm.
03-11-2010, 08:57 AM
#6
Darksoul MRC wheels SOLD!! TY
03-11-2010, 08:58 AM
#7
Dang : (
03-11-2010, 01:17 PM
#8
Sorry bout that...I still have the scalers 
03-11-2010, 09:24 PM
#9
Scalers I think are now pending....No reasonable deals will be denied. Make a package and we can work out a great package.
03-12-2010, 07:20 AM
#10
Price on blitz lowered dramatically.
03-13-2010, 10:58 PM
#11
lets get this stuff gone holmes.
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
