For Sale: Project ReCrawlVo ~ Revo Crawler
08-26-2009, 09:10 AM
#1
For Sale: Project ReCrawlVo ~ Revo Crawler
Selling this for a buddy of mine. Here is the info he stated on it.
This is a project I did a few months ago just for fun, but dont find myself using it. So here it up for sale to fund, well, another project.
It started out as an E-Revo, with the following modifications.
- Long Travel Setup Rocker Arms (can easily lift one wheel 10")
- Traxxas Spools in front and rear diffs (locked diffs) (original diffs also included)
- Heavy Duty Servo Saver Spring
- Raised Body Mounts
- Ugraded to 17mm Hex Hubs
- Axial Oversized Narrow Rockster Beadlock Wheels
- RC4WD 8.26" Diameter Rock Crusher Tires (I admit it, I built the rig just for the tires)
- Titan 775 Motor
- Lowest E-Revo Gear Ratio (68T Spur ?T Pinion)
The entire Revo was completely disassembled for this project. Every thing greased, etc.
Tires have very little use (sorry for the dust)
Chassis has typical scratches on bottom. Body also has scratches.
I am selling it basically as a roller, plus the motor.
You will need an ESC, Remote & RX, Steering Servo, and Battery to get it going.
I recommend running a good ESC and a good about of voltage to it, this is no small RC :mrgreen:
Will also throw in anything else I find laying around that goes with it, I know I have the original Revo bumpers for it.
I also have a used set of stock Revo wheels and tires if you want those also.
They are thrashed up, but have good tread.
Looking to get $350 Shipped OBO
This is a project I did a few months ago just for fun, but dont find myself using it. So here it up for sale to fund, well, another project.
It started out as an E-Revo, with the following modifications.
- Long Travel Setup Rocker Arms (can easily lift one wheel 10")
- Traxxas Spools in front and rear diffs (locked diffs) (original diffs also included)
- Heavy Duty Servo Saver Spring
- Raised Body Mounts
- Ugraded to 17mm Hex Hubs
- Axial Oversized Narrow Rockster Beadlock Wheels
- RC4WD 8.26" Diameter Rock Crusher Tires (I admit it, I built the rig just for the tires)
- Titan 775 Motor
- Lowest E-Revo Gear Ratio (68T Spur ?T Pinion)
The entire Revo was completely disassembled for this project. Every thing greased, etc.
Tires have very little use (sorry for the dust)
Chassis has typical scratches on bottom. Body also has scratches.
I am selling it basically as a roller, plus the motor.
You will need an ESC, Remote & RX, Steering Servo, and Battery to get it going.
I recommend running a good ESC and a good about of voltage to it, this is no small RC :mrgreen:
Will also throw in anything else I find laying around that goes with it, I know I have the original Revo bumpers for it.
I also have a used set of stock Revo wheels and tires if you want those also.
They are thrashed up, but have good tread.
Looking to get $350 Shipped OBO
08-31-2009, 03:00 AM
#7
Would u go $250 shipped no motor or stock wheels. Pm me thanks I just sold my 3 erevos on here I sold stock out the box erevo 225 shipped but I like thos wheels.
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
