The trading post
09-16-2009, 10:16 AM
#76
I'm looking for a Mamba Max ESC, or Traxxas Velineon ESC.
Last edited by marooko; 10-02-2009 at 12:54 PM.
09-16-2009, 01:17 PM
#77
What I have:
-Mugen MBX5T Truggy Roller with a few upgrades
-HPI RS4 2 Complete with OS .12 or .15 Engine (I forget which is currently mounted)
-CEN Fun Factor that runs, but needs a few parts
-Traxxas Revo 3.3 Race Ready and a TON of Spare parts
-RC10T4 Roller
-Losi XXT Roller (needs a rear bulkhead or arm)
-LRP 28R Spec 3 Truggy Motor (1.5 gallons or so on it and a mild port job)
-Traxxas VXL System. Runs great. Motor has a nice dent in the can, but still works fine. Just replaced the bearings in it as well.
What I need/want:
-XT8 Parts Truggy (Complete, or missing some items)
-1/8th Scale Brushless setup for an RC8 (Motor + ESC and I need the eConversion Kit)
-DX3R or DX3S Radio Setup
-High Speed Truggy Throttle Servo (JR 8800S or equiv)
-LIPO Balancer
-AKA Truggy Wheels (Soft/Medium Compound)
-Hudy OffRoad Setup Station with Setup Board (Truggy/Buggy)
-Good set of Hex Wrenches
Let me know what you have....if you want anything I have....and maybe we can make a deal.
-Mugen MBX5T Truggy Roller with a few upgrades
-HPI RS4 2 Complete with OS .12 or .15 Engine (I forget which is currently mounted)
-CEN Fun Factor that runs, but needs a few parts
-Traxxas Revo 3.3 Race Ready and a TON of Spare parts
-RC10T4 Roller
-Losi XXT Roller (needs a rear bulkhead or arm)
-LRP 28R Spec 3 Truggy Motor (1.5 gallons or so on it and a mild port job)
-Traxxas VXL System. Runs great. Motor has a nice dent in the can, but still works fine. Just replaced the bearings in it as well.
What I need/want:
-XT8 Parts Truggy (Complete, or missing some items)
-1/8th Scale Brushless setup for an RC8 (Motor + ESC and I need the eConversion Kit)
-DX3R or DX3S Radio Setup
-High Speed Truggy Throttle Servo (JR 8800S or equiv)
-LIPO Balancer
-AKA Truggy Wheels (Soft/Medium Compound)
-Hudy OffRoad Setup Station with Setup Board (Truggy/Buggy)
-Good set of Hex Wrenches
Let me know what you have....if you want anything I have....and maybe we can make a deal.
10-02-2009, 12:54 PM
#79
Have an Orion 2400, 20C, 2S Lipo I got in a purchase, and an electric 4-Tec roller. Looking for a decent, working, metal geared servo or a brushless capable ESC. PM me.
10-02-2009, 01:52 PM
#80
Tech Adept
iTrader: (9)
what i have
erevo roller modded with full rpm arms center cvds trax red p2 pust rods traxxas red turnbuckles lundsford titanium hinge pins trax sway bar kit proline single servo arm carbon fiber rear hinge pin brace single motor mount. also have tons of stock erevo parts
what i want
1/8th buggy or truggy
also consider electric ready rc8e or slayer
erevo roller modded with full rpm arms center cvds trax red p2 pust rods traxxas red turnbuckles lundsford titanium hinge pins trax sway bar kit proline single servo arm carbon fiber rear hinge pin brace single motor mount. also have tons of stock erevo parts
what i want
1/8th buggy or truggy
also consider electric ready rc8e or slayer
10-02-2009, 02:33 PM
#81
What I have:
my Associated MGT 8.0:
The truck and stock tires
XP3D Radio system (FM)
A hump pack
Brand new extra AE body
Bashing body
Stock (excellent compression just a scratch on cooling head) engine (it's a thunder tiger .50)
AE starter system
Some spare arms and shocks
It's ARTR. Add a steering servo and a pack for the electric starter and you're off enjoying one of the most powerful and sturdy Monster Truck of its class
I will shoulder shipping of truck.
What I want is a:
MMM v.3 combo or Tekin RX8 combo
Steering servo
Spektrum receiver
my Associated MGT 8.0:
The truck and stock tires
XP3D Radio system (FM)
A hump pack
Brand new extra AE body
Bashing body
Stock (excellent compression just a scratch on cooling head) engine (it's a thunder tiger .50)
AE starter system
Some spare arms and shocks
It's ARTR. Add a steering servo and a pack for the electric starter and you're off enjoying one of the most powerful and sturdy Monster Truck of its class
I will shoulder shipping of truck.
What I want is a:
MMM v.3 combo or Tekin RX8 combo
Steering servo
Spektrum receiver
10-05-2009, 11:09 AM
#82
Hey guys if you have a 1/10 bl system or any upgraded slash parts go here(my thread) and we can work out a trade everything i have is at the bottom
http://www.rctech.net/forum/r-c-item...ml#post6428146
im looking for alot of stuff
http://www.rctech.net/forum/r-c-item...ml#post6428146
im looking for alot of stuff
10-05-2009, 11:16 AM
#83
TRADE
WELL A FRIEND GAVE ME THIS STUFF AS HE DID NOT WANT IT ANYMORE AND I WAS GOING TO FIX IT BUT INSTEAD I WANT A 1/16-1/18 SCALE FOR MY SON FOR US TO RACE INDOORS. COMES WITH AN ALMOST COMPLETE HELI WITH 2 REMOTS RECEIVER SPEEDO SERVOS 2 TRAINING GEARS 2 CHARGERS AND A FEW NIP PARTS .WILL ALSO TRADE FOR AXE CX MICRO HELI OR PARTS 70.00 SHIPPED BUT PREFER TRADE JUST LET ME KNOW WHAT YOU HAVE.
I ALSO HAVE A SH PTXB 2008 .21 NITRO ENGINE with little over a gallon that i want to trade for a 1/18 type car or truck for my son to run indoors. 150 shipped traded
I AM LOOKING FOR 1/16 -1/18 CARS BUT LET ME KNOW WHAT YOU HAVE
I ALSO HAVE A SH PTXB 2008 .21 NITRO ENGINE with little over a gallon that i want to trade for a 1/18 type car or truck for my son to run indoors. 150 shipped traded
I AM LOOKING FOR 1/16 -1/18 CARS BUT LET ME KNOW WHAT YOU HAVE
10-05-2009, 11:28 AM
#84
What I have:
-Mugen MBX5T Truggy Roller with a few upgrades (Gone to bcr500!)
-HPI RS4 2 Complete with OS .12 or .15 Engine (I forget which is currently mounted)
-CEN Fun Factor that runs, but needs a few parts
-Traxxas Revo 3.3 Race Ready and a TON of Spare parts
-RC10T4 Roller
-Losi XXT Roller (needs a rear bulkhead or arm)
-LRP 28R Spec 3 Truggy Motor (1.5 gallons or so on it and a mild port job)
-Traxxas VXL System. Runs great. Motor has a nice dent in the can, but still works fine. Just replaced the bearings in it as well.
-FT RC8 rolling chassis (I may trade this for the right deal..)
-Traxxas Slash with 3 races on it, and a good amount of spare parts (I may trade this for the right deal)
-3 sets of XRay XB8/XT8 Shocks (and a few springs)
What I need/want:
-Jammin Big Bores (or another set that will work on a Buggy/Truggy)
-1/10th scale 4WD Buggy Roller or complete (Dark Impact, B44 etc etc etc)
-XT8 Parts Truggy (Complete, or missing some items)
-1/8th Scale Brushless setup for an RC8 or XB8 (Motor + ESC and I need the eConversion Kit)
-DX3R or DX3S Radio Setup (TX or TX/RX together)
-LIPO Balancer (Astro Blinky?)
-AKA Truggy Wheels (Soft/Medium Compound)
-Airbrush setup
-1/8th scale Buggy/Truggy Hauler bag(s)
-Smaller Power Supply, I have an old Pyramid but it's too heavy to haul to the track!
-Hudy Pit Bag
-Hudy Tools (Mostly need the hexes)
-Hudy OffRoad Setup Station with Setup Board (Truggy/Buggy)
Let me know what you have....if you want anything I have....and maybe we can make a deal.
-Mugen MBX5T Truggy Roller with a few upgrades (Gone to bcr500!)
-HPI RS4 2 Complete with OS .12 or .15 Engine (I forget which is currently mounted)
-CEN Fun Factor that runs, but needs a few parts
-Traxxas Revo 3.3 Race Ready and a TON of Spare parts
-RC10T4 Roller
-Losi XXT Roller (needs a rear bulkhead or arm)
-LRP 28R Spec 3 Truggy Motor (1.5 gallons or so on it and a mild port job)
-Traxxas VXL System. Runs great. Motor has a nice dent in the can, but still works fine. Just replaced the bearings in it as well.
-FT RC8 rolling chassis (I may trade this for the right deal..)
-Traxxas Slash with 3 races on it, and a good amount of spare parts (I may trade this for the right deal)
-3 sets of XRay XB8/XT8 Shocks (and a few springs)
What I need/want:
-Jammin Big Bores (or another set that will work on a Buggy/Truggy)
-1/10th scale 4WD Buggy Roller or complete (Dark Impact, B44 etc etc etc)
-XT8 Parts Truggy (Complete, or missing some items)
-1/8th Scale Brushless setup for an RC8 or XB8 (Motor + ESC and I need the eConversion Kit)
-DX3R or DX3S Radio Setup (TX or TX/RX together)
-LIPO Balancer (Astro Blinky?)
-AKA Truggy Wheels (Soft/Medium Compound)
-Airbrush setup
-1/8th scale Buggy/Truggy Hauler bag(s)
-Smaller Power Supply, I have an old Pyramid but it's too heavy to haul to the track!
-Hudy Pit Bag
-Hudy Tools (Mostly need the hexes)
-Hudy OffRoad Setup Station with Setup Board (Truggy/Buggy)
Let me know what you have....if you want anything I have....and maybe we can make a deal.
Last edited by MotoGod; 10-07-2009 at 01:14 PM. Reason: Added Big Bores and XB8/XT8 Shocks
10-05-2009, 12:03 PM
#85
I have new 3pks with hrs system and a load of crt.5 stuff
http://www.rctech.net/forum/r-c-item...t-crt-5-s.html
http://www.rctech.net/forum/r-c-item...t-crt-5-s.html
10-05-2009, 12:24 PM
#87
LF 2 Airtronics RX #92324
I am seriously looking for 2 Airtronics Receivers #92324
In exchange ::
- I have a Castle Creation Brushless Motor CM36-S4600 NIB (100$ value)
- Also a FM Airtronics MX-3 Combo with receiver #92736.
- I could also have a Novak GTB ESC if you have both receiver available.
In exchange ::
- I have a Castle Creation Brushless Motor CM36-S4600 NIB (100$ value)
- Also a FM Airtronics MX-3 Combo with receiver #92736.
- I could also have a Novak GTB ESC if you have both receiver available.
10-06-2009, 12:22 AM
#88
WHAT I HAVE:
-xxx4 roller (might be missing belt if i cant order one but i will probally have one)
-xxxb roller
-mabye more if i find some more ill post it
WHAT I NEED:
-a sc10 roller (thats in good condition i will trade both buggies if needed)
PM ME WIT INFO I NEED TO GET RACING AGAIN BECAUSE NOBODY RACES BUGGIES WHERE IM AT ONLY SHORT COURSE
-xxx4 roller (might be missing belt if i cant order one but i will probally have one)
-xxxb roller
-mabye more if i find some more ill post it
WHAT I NEED:
-a sc10 roller (thats in good condition i will trade both buggies if needed)
PM ME WIT INFO I NEED TO GET RACING AGAIN BECAUSE NOBODY RACES BUGGIES WHERE IM AT ONLY SHORT COURSE