Rustler VXL Mamba monster esc, CC 5700kv 2.4GHz radio
04-30-2009, 12:37 PM
#1
Rustler VXL Mamba monster esc, CC 5700kv 2.4GHz radio
Up for sale is my rustler vxl. I bought it as a roller and put a ton of parts on it. Everything works flawlessly. Here is a little vid to show what it can do.
http://s114.photobucket.com/albums/n...nt=Rustler.flv
It comes with the following:
-RPM carriers on all four corners with upgraded bearings
-All 4 A-arms are RPM
-Monster Max ESC, with the castle link software and cable. This is really overkill but I had it leftover from my E-maxx
-Castle Creations 5700kv Brushless motor
-Losi DSM 2.4 Ghz Receiver and Transmitter
-Traxxas wheelie bar with upgraded bearing type wheels. They ride on bearings instead of screws like they do from the factory.
-Has 86T spur gear installed, also comes with 76T spur gear
-6 Robinson Racing pinion gears. 15,17,19,21,23,25 part number RRP1055
-Aluminum Drive Hubs on the rear to avoid stripping out the rims.
-Hi-torque Steering servo. MG995
Specification:
Dimension : 40mm x 19mm x 43mm
Weight : 55g
Operating Speed : 0.17sec / 60 degrees (4.8V no load)
Operating Speed : 0.13sec / 60 degrees (6.0V no load)
Stall Torque : 13 kg-cm (180.5 oz-in) at 4.8V
Stall Torque : 15 kg-cm (208.3 oz-in) at 6V
Operation Voltage : 4.8 - 7.2Volts
Gear Type: All Metal Gears
Connector Wire: Heavy Duty, 11.81" (300mm)
-9-cell Tenergy's Propel 4500mah matched NiMh pack. I soldered it and the Y-harness.
-Hobbico Dual Peak Charger for NiMh and NiCd batteries
-Talon Sportmaxx Tires all around.
-E-maxx springs on the rear to accomodate for the extra weight of the battery pack.
I have tons of money in this thing, and it is all done right and in great shape. Feel free to contact me with any questions. Email me at [email protected] $375 shipped.
http://s114.photobucket.com/albums/n...nt=Rustler.flv
It comes with the following:
-RPM carriers on all four corners with upgraded bearings
-All 4 A-arms are RPM
-Monster Max ESC, with the castle link software and cable. This is really overkill but I had it leftover from my E-maxx
-Castle Creations 5700kv Brushless motor
-Losi DSM 2.4 Ghz Receiver and Transmitter
-Traxxas wheelie bar with upgraded bearing type wheels. They ride on bearings instead of screws like they do from the factory.
-Has 86T spur gear installed, also comes with 76T spur gear
-6 Robinson Racing pinion gears. 15,17,19,21,23,25 part number RRP1055
-Aluminum Drive Hubs on the rear to avoid stripping out the rims.
-Hi-torque Steering servo. MG995
Specification:
Dimension : 40mm x 19mm x 43mm
Weight : 55g
Operating Speed : 0.17sec / 60 degrees (4.8V no load)
Operating Speed : 0.13sec / 60 degrees (6.0V no load)
Stall Torque : 13 kg-cm (180.5 oz-in) at 4.8V
Stall Torque : 15 kg-cm (208.3 oz-in) at 6V
Operation Voltage : 4.8 - 7.2Volts
Gear Type: All Metal Gears
Connector Wire: Heavy Duty, 11.81" (300mm)
-9-cell Tenergy's Propel 4500mah matched NiMh pack. I soldered it and the Y-harness.
-Hobbico Dual Peak Charger for NiMh and NiCd batteries
-Talon Sportmaxx Tires all around.
-E-maxx springs on the rear to accomodate for the extra weight of the battery pack.
I have tons of money in this thing, and it is all done right and in great shape. Feel free to contact me with any questions. Email me at [email protected] $375 shipped.
Last edited by cyber_06_wolf; 05-05-2009 at 08:17 PM.
04-30-2009, 01:51 PM
#2
bump
bump
04-30-2009, 08:43 PM
#3
night bump
05-01-2009, 07:54 AM
#4
ttt
05-01-2009, 09:35 PM
#5
make some offers people. my mustang needs a motor lol
05-02-2009, 07:21 AM
#6
$400 shipped
05-02-2009, 01:33 PM
#7
up
05-03-2009, 06:29 AM
#8
anyone?? no offers or anything?
05-03-2009, 03:25 PM
#9
bump
05-04-2009, 04:57 AM
#11
You have a PM. My ebay username is cyber_06_wolf . I have 100% positive feedback with over 120 scores. I'm in Lancaster, SC. More pics at http://s114.photobucket.com/albums/n...6wolf/rustler/
05-04-2009, 05:05 AM
#12
Tech Initiate
PM'ed YA >>>>> 
05-04-2009, 10:55 AM
#13
replied, sorry, not looking for any trades. I want cash to build the motor in my mustang
05-04-2009, 08:26 PM
#14
up again
05-05-2009, 11:00 AM
#15
bumpz