Losi 8 EL8 electric conversion parts for sale
10-24-2007, 03:00 PM
#1
Losi 8 EL8 electric conversion parts for sale
Here is what i have to the EL8 conversion. Everyting has about 1 hr run time. nothing was abused and the buggy was retartedly fast. Buggy would yank the front wheels down the straight on command, waaaayyyy faster than the nitro cars. Motor never got above 140 degrees. I will have 2 mamba max esc once they come back from mamba for sale also. Prices are shipped.
Rcproduct designs motor mount needs to go back to dan for repair as the threads are not deep enough and they are a bit chewed up.
Monster mike motor mount and spacer-50.00
rcproduct designs battery mount old style, front is broken off but with velcro the battery will not move. I used zip ties in the front and the battery was secure.-30.00
rcproduct designs new style battery tray with velcro on the bottom-SOLD
rcprduct designs top esc mount-two holes have been elongated to work with the monster mike motor plate-SOLD
two fans for esc-SOLD
BEC- SOLD
Kyosho 46 tooth spur gear, I have two one is NIP and the other is still on my diff I will remove it.SOLD
Gorilla velcro straps NIP-10.00
Max amps 4s2p 6000 Mah battery with Hyperion/Apache balancing tab 12 GA wire upgreade and deans already installed, velcro on side of battery for batter tray. This thing does NOT move at all with velcro on it. It is very difficult to get it out once velcroed in lol. Again no more than 1hr runtime on ti works great, was seeing about 1500 Mah usage for a 5 min qualifier including warm up laps. Ran 3 qualyfiers and a 10 min main-190.00
Neu 1512 1.5 D/F motor. Never ran hot hits like crazy with the 11 t pinion on it. Few marks from the mnotor mount. also have the rear dust cover for it never used.-SOLD
3 Century Mod1 pinions 11,13,14 teeth, two NIP-SOLD for all of them.
I would like to see most of this go in a packge deal.
Thanks
Sean
Rcproduct designs motor mount needs to go back to dan for repair as the threads are not deep enough and they are a bit chewed up.
Monster mike motor mount and spacer-50.00
rcproduct designs battery mount old style, front is broken off but with velcro the battery will not move. I used zip ties in the front and the battery was secure.-30.00
rcproduct designs new style battery tray with velcro on the bottom-SOLD
rcprduct designs top esc mount-two holes have been elongated to work with the monster mike motor plate-SOLD
two fans for esc-SOLD
BEC- SOLD
Kyosho 46 tooth spur gear, I have two one is NIP and the other is still on my diff I will remove it.SOLD
Gorilla velcro straps NIP-10.00
Max amps 4s2p 6000 Mah battery with Hyperion/Apache balancing tab 12 GA wire upgreade and deans already installed, velcro on side of battery for batter tray. This thing does NOT move at all with velcro on it. It is very difficult to get it out once velcroed in lol. Again no more than 1hr runtime on ti works great, was seeing about 1500 Mah usage for a 5 min qualifier including warm up laps. Ran 3 qualyfiers and a 10 min main-190.00
Neu 1512 1.5 D/F motor. Never ran hot hits like crazy with the 11 t pinion on it. Few marks from the mnotor mount. also have the rear dust cover for it never used.-SOLD
3 Century Mod1 pinions 11,13,14 teeth, two NIP-SOLD for all of them.
I would like to see most of this go in a packge deal.
Thanks
Sean
Last edited by lbz34; 12-01-2007 at 12:13 PM. Reason: add info
10-24-2007, 03:44 PM
#3
YGPM
10-25-2007, 09:15 AM
#5
ygpm
11-02-2007, 06:23 PM
#9
Is this the same motor that rcmonster sells for $240?
http://www.rc-monster.com/proddetail...121.5df&cat=20
http://www.rc-monster.com/proddetail...121.5df&cat=20
