FS/FT Associated FT B4
09-09-2006, 08:49 AM
#1
FS/FT Associated FT B4
Now you can get your own full-option “Factory” ride buggy complete with over $150 worth of “Factory Team” upgrades! The B4 “Factory Team” features all molded carbon components including the chassis, front and rear shock towers, front and rear A-Arms, chassis brace, and top plate. The battery strap is made of woven carbon fiber, and comes with a chrome/black “AE Factory Team” sticker.
The Team's standard threaded, hard-anodized, PTFE-coated shocks with Unobtainium shafts handle the dampening on all four corners. A complete set of 14 PTFE sealed bearings are included to ensure smooth, efficient operation. Lightweight outdrives are included, as well as a new clear injection-molded gear cover. To get the power to the ground.
No Factory Team kit would be complete without a full array of “Factory Blue” components, so the B4 includes blue Titanium turnbuckles, aluminum servo mounts, wheel spacers, front hinge pin brace, center-drilled front axles, screws and a lightweight milled blue aluminum motor mounting plate.
This FTB4 comes with a recently painted JC Concepts Scoopless body, Team Orion Rush "13 Turn" Can (just the can), JR RS300 Synthesized FM reciever, and 6 Sets of tires including: 1 new set Proline Holeshots, 1 new set Losi IMFAR Pin, 1 new set of Losi IMFAR Studs, 1 set of Proline Wide 4-Rib, 1 set of VERY used Losi IMFAR Pins, and 1 set of VERY used Proline Holeshots.
Open to all resonable offers, Will trade for a AE FT T4 or a Losi XXXT MF2.
The Team's standard threaded, hard-anodized, PTFE-coated shocks with Unobtainium shafts handle the dampening on all four corners. A complete set of 14 PTFE sealed bearings are included to ensure smooth, efficient operation. Lightweight outdrives are included, as well as a new clear injection-molded gear cover. To get the power to the ground.
No Factory Team kit would be complete without a full array of “Factory Blue” components, so the B4 includes blue Titanium turnbuckles, aluminum servo mounts, wheel spacers, front hinge pin brace, center-drilled front axles, screws and a lightweight milled blue aluminum motor mounting plate.
This FTB4 comes with a recently painted JC Concepts Scoopless body, Team Orion Rush "13 Turn" Can (just the can), JR RS300 Synthesized FM reciever, and 6 Sets of tires including: 1 new set Proline Holeshots, 1 new set Losi IMFAR Pin, 1 new set of Losi IMFAR Studs, 1 set of Proline Wide 4-Rib, 1 set of VERY used Losi IMFAR Pins, and 1 set of VERY used Proline Holeshots.
Open to all resonable offers, Will trade for a AE FT T4 or a Losi XXXT MF2.
Last edited by Darkshinobi; 09-20-2006 at 07:49 PM.
09-09-2006, 09:52 AM
#2
Would you accept $115.00 for just a roller? I dont need the can or reciever. Thanks.
Last edited by Stefan Millay; 09-10-2006 at 07:23 PM.
09-09-2006, 10:29 AM
#3
for the roller with the tires i would like $130 + Shipping
email address: [email protected]
current location: Rochester NY
email address: [email protected]
current location: Rochester NY
09-09-2006, 02:31 PM
#4
$125 for the Roller With Tires and the Can.
$145 for the Roller With Tires, Can, and Reciever.
$150 for the Roller With Tires, Can, Reciever, and a Handout Stocker.
$145 for the Roller With Tires, Can, and Reciever.
$150 for the Roller With Tires, Can, Reciever, and a Handout Stocker.
Last edited by Darkshinobi; 09-10-2006 at 06:39 AM.
09-09-2006, 08:09 PM
#5
Late Night Bump
09-10-2006, 06:39 AM
#6
prices updated
09-10-2006, 11:52 AM
#7
afternoon bump
09-10-2006, 07:22 PM
#8
Will you accept 115.00 plus shipping?
09-10-2006, 07:39 PM
#9
YGM
09-11-2006, 06:05 AM
#10
couple offers, nobody has got back to me
bump before classes
bump before classes
09-11-2006, 11:30 AM
#11
bump it
09-11-2006, 12:10 PM
#12
Tech Initiate
how about trades for a FT TC4?
09-11-2006, 04:52 PM
#13
wish you would have said that before i went out and got a t4, so it looks like im racing indoor dirt oval this winter, rather just race indoor carpet....so no trades anymore 
09-11-2006, 05:14 PM
#15
yes rochester ny 14623