Your Custom Paintjobs
#721
Super Moderator
iTrader: (2)
Well, I think a lot depends on the camera you have & what kinds of settings it has. In my case, my Sony has a number of different exposure & effect settings that make it easier to get very close to what the object looks like in person. In the pic I posted earlier, the only thing that didn't turn out ideally was some glare from the sun, but it wasn't bad, the colors though turned out very nice(& I think they look even better in the non-compresed file, the one I posted was only 11Kb, as compared to the normal file size of 65-74Kb & in a larger image of 640x480 size). If you experiment with your camera's settings(& maybe with the light source you use), you might be able to get it closer to what you're looking for.....
#722
Tech Initiate
Re: How improve picture quality?
Originally posted by yokomojo
Guys:
Got any tips for capturing the true colors with a digital camera?
I'm using a camera with 2 megapixels.
Please see attached.
Thanks,
Joe
Guys:
Got any tips for capturing the true colors with a digital camera?
I'm using a camera with 2 megapixels.
Please see attached.
Thanks,
Joe
Try using different settings on your camera. For example: if it has light settings (Daylight, on/off flash, red eye, etc)
Hope this helps
#723
My first official attempt with an airbrush.. Really nothing fancy that couldn't be done with cans. The paint masks were created by me, and the dodge and stratus 3 layer decals were also created by me. It's nice to have a stika machine.. LOL hope everyone likes it. I thought it turned out nice.
E
E
#724
Tech Adept
myst:
Looks great! Clean mask lines, design not overdone.
What airbrush did you buy to get started in airbrushing? What paints you usin'?
Thanks,
Joe
Looks great! Clean mask lines, design not overdone.
What airbrush did you buy to get started in airbrushing? What paints you usin'?
Thanks,
Joe
#725
Tech Adept
Oh yeah . . .
Thanks to everybody that has contributed to this forum.
I'm just getting started in airbrushing and have learned a lot from you guys.
Joe
Thanks to everybody that has contributed to this forum.
I'm just getting started in airbrushing and have learned a lot from you guys.
Joe
#729
RC PAINTJOB CONTEST
As promised, the contest on is the way! A few Simple rules and the results will be posted here.
Rules:
1. Only 10 Cars will be in the finals. Only 1 overall winner.
2. Only one(1) entry per person. Lets be fair..everyone gets a chance to win a prize!
3. Interiors and little extras help,BUT this is a paint contest..the paint is the most important part will will be judged the most.
4. The contest will be open for only 2 weeks until the final 10 are chosen and will be voted on.
5. Paintjobs MUST be painted by the person entering...NO EXCEPTIONS!
6. PRO PAINTERS please refrain from entering. This is only for Amateurs.
7. All entries must be submitted at [email protected] and has a deadline of June 18, 11:59 PST. NO LATE ENTRIES PLEASE
Winner will be selected after voting poll is completed.
What's the Prize?
One(1) rc body donated by KTHOBBIES
One(1) paint mask (CFX)
One(1) 8x11 Paint mask with ANY graphic to get custom cut.(CFX)
So..with that said...LET THE PAINTJOBS BEGIN!!!
Special thanx to Our Sponsors,
Kraig, KT HOBBIES
Troy, TSR6
RCTECH
Forn any questions, email me at [email protected]
Rules:
1. Only 10 Cars will be in the finals. Only 1 overall winner.
2. Only one(1) entry per person. Lets be fair..everyone gets a chance to win a prize!
3. Interiors and little extras help,BUT this is a paint contest..the paint is the most important part will will be judged the most.
4. The contest will be open for only 2 weeks until the final 10 are chosen and will be voted on.
5. Paintjobs MUST be painted by the person entering...NO EXCEPTIONS!
6. PRO PAINTERS please refrain from entering. This is only for Amateurs.
7. All entries must be submitted at [email protected] and has a deadline of June 18, 11:59 PST. NO LATE ENTRIES PLEASE
Winner will be selected after voting poll is completed.
What's the Prize?
One(1) rc body donated by KTHOBBIES
One(1) paint mask (CFX)
One(1) 8x11 Paint mask with ANY graphic to get custom cut.(CFX)
So..with that said...LET THE PAINTJOBS BEGIN!!!
Special thanx to Our Sponsors,
Kraig, KT HOBBIES
Troy, TSR6
RCTECH
Forn any questions, email me at [email protected]
#730
Super Moderator
iTrader: (81)
Charlie is correct. I am working with Shane on getting them on the his website as well. I will be working on the picture page today and have the link on the main page. I will post when it is available and put up the pictures that I do have. This is going to be fun!
#732
CharlieB, Is that two hour paint job for sale????
#733
Tech Adept
Charlie:
Looks great! What brand of paints are you using?
I really like that gold color. How did you achieve that?
Later,
Joe
Looks great! What brand of paints are you using?
I really like that gold color. How did you achieve that?
Later,
Joe
#734
I have one question about the contest...Does it help for the body to be cut out and on a car, or will that really matter?