Your Custom Paintjobs
Tech Elite
iTrader: (8)
Some of my RC work from the last month:
I havenīt been paiting a lot in the last few years. Somehow a steady income and 9 to 5 job removed most of the motivation... But now Iīm thinking of trying to be more active in the painting stuff again.
Just wanted to share some of the bodies Iīve made in the last 2 years.
First two designs were for the 2010 TC worlds.
Then few for the local drivers.
And the a few of my personal bodies:
Buggies for the 2011 Worlds that got into the top 10 of concourse.
Just wanted to share some of the bodies Iīve made in the last 2 years.
First two designs were for the 2010 TC worlds.
Then few for the local drivers.
And the a few of my personal bodies:
Buggies for the 2011 Worlds that got into the top 10 of concourse.
Last edited by Stilo; 09-08-2012 at 02:21 AM.
Tech Regular
iTrader: (4)
fresh paint!
Tech Elite
iTrader: (60)
nice TC's been a while since I've seen that many. I get to paint one next week- so excited to paint on a flat surface!!
Tech Elite
iTrader: (17)
Tech Elite
iTrader: (60)
very nice Jim
TC's AND 1/12ths?... must be gettin chilly outside
TC's AND 1/12ths?... must be gettin chilly outside
Tech Elite
iTrader: (110)
Jconcepts Illuzion Hiflow
TLR High Performance
TLR High Performance
Tech Elite
iTrader: (124)
I just have fun painting for the locals. Man some of the fine lines you guys do...I need another brush that can go smaller then a .5
well, here's two i just finished.
well, here's two i just finished.
Tech Master
iTrader: (56)
I just finished this one for me. I used an old center section when I built the body so it doesn't quit match.
Here's three new bodies I did for my racing friend who always wants R,W&B bodies! First two are Parma SPEEDFLO bodies and the last one, obviously is the Parma Rattler. All of them have nice deep wheel wells.
We have found that the SPEEDFLO bodies tend to crack pretty quickly on the vertical rear corners. Also around the number plate areas. Don't know if it was just that run of bodies or if Parma needs to tweek a little when they form them if possible. No biggie to fix with some fiberglass cloth and goo, just sayin'.
The Rattler didn't really lend it self to stripes. I tried it and it looked goofy, so I followed the body lines and I think that's a much better look. Should show up well on the track!
We have found that the SPEEDFLO bodies tend to crack pretty quickly on the vertical rear corners. Also around the number plate areas. Don't know if it was just that run of bodies or if Parma needs to tweek a little when they form them if possible. No biggie to fix with some fiberglass cloth and goo, just sayin'.
The Rattler didn't really lend it self to stripes. I tried it and it looked goofy, so I followed the body lines and I think that's a much better look. Should show up well on the track!
Tech Regular
Man, these paint jobs are incredible...
Mine are all just masking tape and cans of spray paint, so nothing too impressive, but here's some of my best rattle can work (thus far):
Yes, that is in fact the most "super" pit towel in the history of pit towels. Nobody has ever been secure enough in their masculinity to move my pit spot when it's been on there...
Mine are all just masking tape and cans of spray paint, so nothing too impressive, but here's some of my best rattle can work (thus far):
Yes, that is in fact the most "super" pit towel in the history of pit towels. Nobody has ever been secure enough in their masculinity to move my pit spot when it's been on there...
HPI 68 Camaro. Faskolor Orange and White for the University of Tennessee Volunteers!
era1fxcustoms
Heres some new wet Graffiti style paint all hand cut, lot of work but well worth it a Happy customer.