19LikesNew 1/8th 4WD basic class ???!!!
03-09-2016, 11:24 PM
#166
BURI-Racers first Tests in US: Kissimee Fullthrottleraceway
look at this:
https://www.youtube.com/watch?v=P__WZHXcdIw
look at this:
https://www.youtube.com/watch?v=P__WZHXcdIw
03-11-2016, 06:36 AM
#167
And here you can see some laps at Homestead raceway:
https://www.youtube.com/watch?v=XkE3fYmYXiI
www.buri-racer.com
https://www.youtube.com/watch?v=XkE3fYmYXiI
www.buri-racer.com
03-14-2016, 06:56 AM
#169
Ok, you guys are racing in Florida, are the car's available in the states yet?
03-14-2016, 08:09 AM
#170
For the very low maintenance, easy to build, (it took less than 2 hours), and most important, "for the fraction of the cost of 1/8 nito car" In my opinion, is a perfect entrance level low budget car.
Thomas, the designer of the Buri, found the way to ship the kits to the USA fast (around 4 days) for a reasonable price.
He is looking for a dealers Here in the USA. To make the car even more affordable.
03-14-2016, 10:44 AM
#171
Not yet. there is only a couple right now in the US. I own the one that you saw on the vid. But, we are planing to bring them for a entrance level, or low budget class.. The car behaves very similar to a regular 1/8 nitro and uses same tires and body shells, but with advantage that you can use the tires, almost to the rim, in fact, the tires on the vid. Are left overs from a nitro racer. Because the car has no suspension, you can use around 3mm right high, and the chassis is not going to hit the ground.
For the very low maintenance, easy to build, (it took less than 2 hours), and most important, "for the fraction of the cost of 1/8 nito car" In my opinion, is a perfect entrance level low budget car.
Thomas, the designer of the Buri, found the way to ship the kits to the USA fast (around 4 days) for a reasonable price.
He is looking for a dealers Here in the USA. To make the car even more affordable.
For the very low maintenance, easy to build, (it took less than 2 hours), and most important, "for the fraction of the cost of 1/8 nito car" In my opinion, is a perfect entrance level low budget car.
Thomas, the designer of the Buri, found the way to ship the kits to the USA fast (around 4 days) for a reasonable price.
He is looking for a dealers Here in the USA. To make the car even more affordable.
I spoke to him last year via email about getting one shipped here. I'll keep watching this forum. If something changes can you PM or email me. Thanks, Will
Last edited by williamw; 03-14-2016 at 10:46 AM. Reason: Info
03-14-2016, 01:54 PM
#172
Buri Racer in South Carolina
I'm very familiar with them and 1/8 scale racing and electric. It been awhile and the only way I'll start again is with an e-car.
I spoke to him last year via email about getting one shipped here. I'll keep watching this forum. If something changes can you PM or email me. Thanks, Will
I spoke to him last year via email about getting one shipped here. I'll keep watching this forum. If something changes can you PM or email me. Thanks, Will
Since there is no 1/8 on-road within 400 miles of here, actual track running will have to wait until I can go up North to run the MidWest Series in Ohio and Illinois this summer. I have run the car on the street and on our local banked oval (1/10 and 1/4 scale run there) and it is easy to drive and quite fast enough to be fun!
I hope to show it off and stir up some interest both around here and in the Northern races.
Ned
03-14-2016, 02:21 PM
#173
I have one in South Carolina! It is a very well designed car,at a great price. Shipping was reasonable.
Since there is no 1/8 on-road within 400 miles of here, actual track running will have to wait until I can go up North to run the MidWest Series in Ohio and Illinois this summer. I have run the car on the street and on our local banked oval (1/10 and 1/4 scale run there) and it is easy to drive and quite fast enough to be fun!
I hope to show it off and stir up some interest both around here and in the Northern races.
Ned
Since there is no 1/8 on-road within 400 miles of here, actual track running will have to wait until I can go up North to run the MidWest Series in Ohio and Illinois this summer. I have run the car on the street and on our local banked oval (1/10 and 1/4 scale run there) and it is easy to drive and quite fast enough to be fun!
I hope to show it off and stir up some interest both around here and in the Northern races.
Ned
03-14-2016, 06:04 PM
#174
You can contact Thomas Burger-Ringer. [email protected]
Also, car info. Videos and FB link are here http://www.buri-racer.at/
Also, car info. Videos and FB link are here http://www.buri-racer.at/
03-15-2016, 06:53 PM
#175
03-25-2016, 02:11 PM
#176
BURI-Racer E1 with shorty Lipo packs
Hi, i just finished an adaption to fix 2pcs of shorty LiPo packs:
100g less weight with this 2s 5500mAh 90 shorty Packs!
I also made a 2nd variation to optimize the weight distribution.
I will offer this soon as an option set.
Tom
www.buri-racer.com
100g less weight with this 2s 5500mAh 90 shorty Packs!
I also made a 2nd variation to optimize the weight distribution.
I will offer this soon as an option set.
Tom
www.buri-racer.com
03-25-2016, 03:20 PM
#177
Tom, I think SMC is working on a short 4S as well, in case you wanted to offer a spacer / adapter plate for that as well. I sent you an email too.
http://www.smc-racing.net/index.php?...product_id=202
http://www.smc-racing.net/index.php?...product_id=202
Last edited by 1/8 IC Fan; 03-26-2016 at 10:07 AM.
03-26-2016, 05:37 PM
#178
I love the shorties implementation... How much time are you able to run with a 5500mAh pack?
I'll probably order one of this adapter kit when ready... Keep us updated!
I'll probably order one of this adapter kit when ready... Keep us updated!
03-30-2016, 09:49 AM
#179
Just some pictures from my sons BURI-Racer with a Lotus 80 body 
Isnt it nice ! 
Isnt it nice !