penggoy

I have a piston and sleeve with conrod and SG crankshaft for MT12. What engine/s will these fit besides mugen MT12?

stefan

Top TT 12 S1

rod_b

I think all the Nova based side exhaust engines (except HPI Evo2) are long rod engines and will be able to use those parts.

Motorman

iTrader: (1)

well almost. the piston, sleeve and crank will fit rear exhaust nova type 12,(pre NS and V12 RB) The sleeve can be used in a side port if the alignment pin is removed from the case. the crank will also fit the side port The rod will only fit the MT or a side port nova engine (non hpi evo) Tall deck type.

nitrodude

iTrader: (8)

Since we're on the subject, will a MR12 conrod fit the RBX12? how about the MT12?

Motorman

iTrader: (1)

yes on the rb no on the mt

penggoy

so I can use MT12 p/s with conrod and crank on rb rody x12 right?

stefan

Noooo, you can use everything but the rod.

Again:

All nova rossi parts are interchangeable, but the rods.

MT12, Top TT12 and NR side exhaust engines have the long conrod, every other engine from NR has a short rod.

thefuzzclub

NOVA S5 will exactly fit.

stefan

except the rod....

isuzuguy

iTrader: (1)

anybody know if a pico/ofna x-12 head button will work on a mr12 took measurments this morning and the only thing i found was the deck height dia. was 0.01 bigger 13.78 nova to a 13.79
pico ,

afm

Yes. I had to use a Nova Head button on a Picco-Collari and worked just fine, no problem, so i guess the other way around should be fine to.
AFM

isuzuguy

iTrader: (1)

thks afm.