R/C Tech Forums

R/C Tech Forums (https://www.rctech.net/forum/)
-   Offroad Nitro Engine Forum (https://www.rctech.net/forum/offroad-nitro-engine-forum-157/)
-   -   Ninja Engine by GRP (https://www.rctech.net/forum/offroad-nitro-engine-forum/95814-ninja-engine-grp.html)

jameslow 09-25-2008 05:23 AM


Originally Posted by sm1nts2escape (Post 4873717)
Anybody run any tuned grp parts in there ninja yet?

i only using the grp con-rod in my ninja .12 now. ha!

kreamUNO 09-30-2008 11:23 AM

i just bought a grp piston and sleeve and replaced the old ones last night

spenzalii 09-30-2008 12:34 PM


Originally Posted by kreamUNO (Post 4891808)
i just bought a grp piston and sleeve and replaced the old ones last night

Got any pictures? I thought the GRP piston and sleeve were supposed to be the 'tuned' version of the Ninja p/s, but wanted to verify before I put out any money.

kreamUNO 09-30-2008 06:07 PM

pictures of the internals? i already installed the clutch, i have a pic of the orange casing, it fits perfectly

Taffyjnr5 10-17-2008 06:24 PM


Originally Posted by kreamUNO (Post 4891808)
i just bought a grp piston and sleeve and replaced the old ones last night

Hi,
I am chasing a new Ninja/GRP piston and liner for my R01 anyone know where I can get one from..............:)

Team Kamikaze 10-17-2008 06:38 PM


Originally Posted by Taffyjnr5 (Post 4950929)
Hi,
I am chasing a new Ninja/GRP piston and liner for my R01 anyone know where I can get one from..............:)

.

dtssystems 11-04-2008 12:21 PM

Email From GRP.
 
We agree that this is a shame but it does not depend on us since Ninja engine project belongs to Mugen so since we consider ourselves as been correct we cannot sell to any other party other than to Mugen Ninja engines. The last small order for spare parts was shipped in May this year to MID in Germany since Mugen Japan wanted so and we never received any other order from them.

On the other hand, since you can include a piston and sleeve of GRP brand in your Ninja engine, we strongly advise to contact one of the following websites:

www.rcMart.com or
www.the-border.com

One of them should carry that part, otherwise please get in touch with us again to solve this problem.

jameslow 11-21-2008 11:31 PM

Anyone know which carb can fit into ninja engine? other then the ninja/grp carb? Thanks!:sweat:

jameslow 11-24-2008 04:16 AM


Originally Posted by jameslow (Post 5079576)
Anyone know which carb can fit into ninja engine? other then the ninja/grp carb? Thanks!:sweat:

any ideas? Thanks!

Taffyjnr5 11-30-2008 05:48 PM

Hi,
I am looking at coverting one of my R01's into a B01 to run in a buggy can I just swap the piston/sleeve and carb and run it that way???........

PROVK 11-30-2008 08:10 PM

You will also need the larger heat sink and make sure you have rubber sealed front bearing

rcabj 12-09-2008 08:54 PM

grp .12 engine glow plug
 
hi guys. its quite difficult to get the grp glow plug over here. can anyone inform me what other brands of glowplug that can be use or compatible for these motors. thanks;)

M7H 12-10-2008 01:38 AM

Because I use GRP plugs in my Picco based engines, I think you can use Picco plugs in your GRP engine to.
Sirio plugs, which are even better, can also be used in Picco engines, so probably also in GRP engines....

rcabj 12-14-2008 09:54 PM


Originally Posted by M7H (Post 5149413)
Because I use GRP plugs in my Picco based engines, I think you can use Picco plugs in your GRP engine to.
Sirio plugs, which are even better, can also be used in Picco engines, so probably also in GRP engines....

thanks

staikosn1 12-25-2008 11:20 AM

For my Mugen MTX4 im between JP P3L black edition and GRP tuned... what do you suggest me and why???? PLS help me in 11/1/09 is starting the club annual event in Greece and i have to make quick!!


All times are GMT -7. It is currently 11:25 AM.

Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.