|
Hey guys,
Just bought a gxII 5rho and am wondering about glow plugs. I know that everyone says use the o'donnell 97t plug, but was also wondering if anything else is any good? Will basically any medium turbo plug work? Like the novarossi c6tgc or c6tgf, or any of the other medium turbo plugs. Just wondering what other options I have :) Cheers |
An OS P4 will work fine.
|
Would GXII-5RHO Engine Parts fit the GX-5R?
|
yes, they'll fit
|
GX II parts will fit the GX engines but they are slightly different, like the lip size on top edge of the sleeve, I read that the GX II 5r engine sleeve has a lip thats .5mm thicker & the top of the crank case lip where it sits is .5mm deeper to compensate.
|
Ive been racing GO Engines since last 2 1/2 years, and as of now im working in remote with the factory for some mods on the .25 engine for Truggy and GT Class ... and pushing hard to get a new distributor for USA.
In southamerica GO is fine, it win races, nice prices, awesome quality and fantastic factory support ... Grizz, i answered your message, please email me to [email protected] regards, |
A mod truggy .25 would be interesting...
|
So I just noticed that the REDS R5TE "Burn Room" looks exactly the same and same price as the gxii one. I have the gxii and it would be interesting if the reds engine parts would be compatible?
|
Originally Posted by george919
(Post 12128538)
So I just noticed that the REDS R5TE "Burn Room" looks exactly the same and same price as the gxii one. I have the gxii and it would be interesting if the reds engine parts would be compatible?
|
anyone interested in a new sealed GX5R combo kit (pipe/motor)? i have one for sale
|
Originally Posted by 69mustangbjs
(Post 12137607)
anyone interested in a new sealed GX5R combo kit (pipe/motor)? i have one for sale
on a differnt note...... i am in need of a 2072 or 081 pipe set, anyone in USA have one that can run a debit card? |
Originally Posted by HBSWAG
(Post 12138956)
depends on price? send me a pm?
on a differnt note...... i am in need of a 2072 or 081 pipe set, anyone in USA have one that can run a debit card? |
What's the story with the Go G5T? Is this a powerful engine?
I'm keen on an Alpha A852, but there's a great offer going in Germany for the G5T including 2072 pipe..., for way less than just the A852.. I want power though. Kinda' keen on the hard ano 2072 the Go comes with as well.. (If I understand correctly, the 2072 is a big power pipe that goes well on lots of engines....) |
Originally Posted by Herrsavage
(Post 12149923)
What's the story with the Go G5T? Is this a powerful engine?
I'm keen on an Alpha A852, but there's a great offer going in Germany for the G5T including 2072 pipe..., for way less than just the A852.. I want power though. Kinda' keen on the hard ano 2072 the Go comes with as well.. (If I understand correctly, the 2072 is a big power pipe that goes well on lots of engines....) |
Can anyone help me please...
Originally Posted by curacing2
(Post 11539298)
CHOAS
I have been running GXII motors all year with the 3 needle carb, this is how i run mine ... lsn needs to be about 1/2 to 3/4 turn out from flush, any leaner and you starve the motor of fuel at idle, msn as you have it flush, hsn, all my motors are 1 1/2 plus turns in from flush, even while running in i was over 1 full turn in...ldle gap i run is around 0.5-0.7mm depending on how much compression they have, also use the GO2072 pipe with these motors. What is confusing with some of the carbs the factory supplys is they flush all the needles, that means lsn and hsn are way off. I run 25% and 30% nitroX fuel OD 97 plugs and factory shimming. Craig |
| All times are GMT -7. It is currently 07:04 AM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.