![]() |
What make and model of camera did you use to take those photos
|
Originally Posted by easyryder
(Post 7300021)
Do you have a link, Back when these first came out I scoured the web for info, no luck. Force model seems super secretive:weird: Thanks!
The internals are the same with the JL .21 pictures you posted early on the thread, I have put 2 gallons on it and I still can't turn it. rctech.net/forum/manila-racers/30425-race-results-45.html rctech.net/forum/manila-racers/34276-off-road-thread-all-scales-unite-1208.html The series champ uses it he also own the shop and introduced the engine, the leaflet of the engine doesn't have website on it that's the reason I watched this thread for tuning tips because the engine is the same. only the two of us was using it when he introduced it, since he won the series and I won one of the novice races in the series ( i came late on the series) most of our racers are now using it :) |
After seeing this, I'm a believer in getting a lapped piston. I'm just so impressed by the lack of wear still. There's no doubt in my mind that it prolongs engine life. I'm quite surprised that the guys that buy the high-dollar mills don't get this done, especially when you consider the benefits. If this engine still looks this good, imagine what an Italian would look like still.:sneaky:
Originally Posted by Jaz240
(Post 7302237)
Very impressive Nid! What fuel are you running?
Originally Posted by dishsoap
(Post 7302965)
What make and model of camera did you use to take those photos
|
Originally Posted by nukem
(Post 7303785)
It came out from our local hobby shop about a month ago they also have pipe on a really expensive box and German words on it but sold here but really cheap about $77 looks like a JP-4.
The internals are the same with the JL .21 pictures you posted early on the thread, I have put 2 gallons on it and I still can't turn it. rctech.net/forum/manila-racers/30425-race-results-45.html rctech.net/forum/manila-racers/34276-off-road-thread-all-scales-unite-1208.html The series champ uses it he also own the shop and introduced the engine, the leaflet of the engine doesn't have website on it that's the reason I watched this thread for tuning tips because the engine is the same. only the two of us was using it when he introduced it, since he won the series and I won one of the novice races in the series ( i came late on the series) most of our racers are now using it :) |
Dumb A$$ question but I have to!
I have 5 tanks thru it so far, started leaning it out a bit, my question is TEMPS, my current temp fluctuates between 190 and 215, when the car goes to idle the temp rises a bit, is this due to my low end being to lean, or just a new engine, are my temps ok, and will they improve after more wear in? |
Originally Posted by lsbully
(Post 7305248)
Dumb A$$ question but I have to!
I have 5 tanks thru it so far, started leaning it out a bit, my question is TEMPS, my current temp fluctuates between 190 and 215, when the car goes to idle the temp rises a bit, is this due to my low end being to lean, or just a new engine, are my temps ok, and will they improve after more wear in? |
Originally Posted by easyryder
(Post 7304730)
Does your hobby ship to usa, I would like to get my hands on one:smile: Thanks for the info:cool:
|
Thanks!
|
Originally Posted by NitroFreakManHo
(Post 7304160)
Thank-you James, I've been running OD 30%, I find it very easy to tune, and also makes my engines very responsive and crisp. I get good mileage too, and it doesn't stain my engine like some other fuels. Smells like ass, though.... |
Originally Posted by CKmaxx
(Post 7309863)
Smells like ass, though....
|
Originally Posted by CKmaxx
(Post 7309863)
Smells like ass, though....
|
I love the smell of a.....I mean OD in the morning.
|
I think I want one of these now. Maybe 2
|
I am running my clocked JL right now at Sun Lakes. 9+ minutes run time. Mugen P5 plug JP-2 and Byrons Pro 2 30% with a 7 mm venturi. Still have my tune a little rich cause the track is super loomy with dozens of ruts so I need to keep the tires at contact as much as possible. God I love this engine. thanks Neal!! You have a winner and I sold one for you to team member Shane Mann. Ship it out bud. I'll send the $$ on Monday. It's turning heads and I'm blowing away ninjas and Novas running rich
|
Originally Posted by Jaz240
(Post 7312225)
I am running my clocked JL right now at Sun Lakes. 9+ minutes run time. Mugen P5 plug JP-2 and Byrons Pro 2 40% with a 7 mm venturi. Still have my tune a little rich cause the track is super loomy with dozens of ruts so I need to keep the tires at contact as much as possible. God I love this engine. thanks Neal!! You have a winner and I sold one for you to team member Shane Mann. Ship it out bud. I'll send the $$ on Monday. It's turning heads and I'm blowing away ninjas and Novas running rich
|
| All times are GMT -7. It is currently 05:52 PM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.