|
Ray you've got email :)
|
Piston&sleeve reconditioning resizing - Race Ready
Eduardo (Florida) serviced and return shipped this morning. Tuesday expected delivery. If the COLD weather didn't break, as it did , I would have hopped on a plane and personally delivers package...it was cold here in Buffalo New York.
Thanks! Ray |
Night before superbowl
Orders serviced - ship out Monday. Andy FLA David CT Pat IA Robert WA
Thanks guys.... Ray |
International order
Jimmy (Sweden) 14 set order serviced and on its way back to you ......should be half way across the pond.
Bench is clear Thanks Ray |
Email down
Hey guys,
I am not receiving emails at this time....problems with internet ..call or text please. thanks RayAracing |
Email delivery
Hi guys,
email delivery is good once again. Ray |
keep up the badass work Ray ......
hope you are well my man !!! |
Piston&sleeve reconditioning resizing
Originally Posted by houston
(Post 15266273)
keep up the badass work Ray ......
hope you are well my man !!! Same to you.......have a safe Holiday!!!!! Ray |
there is nobody else i would trust to resize my piston / sleeve sets but this guy here ....Ray is awesome !!!!
|
I have a werks b5 that has scoring on exhaust side of piston. It may also have some aluminum on the sleeve. Is this something that can be "cleaned up" or will it need a new piston-sleeve?
|
Surface finish damage
Hi Speedworks,
surface finish conditions are equally important as the pinch itself. The scoring on sleeve liner you describe may not easily hone put, resulting a sealing loss . depends on the damage.....you can ship the piston and set an I will let you know after iinspection. Ray |
Originally Posted by RayA
(Post 15296156)
Hi Speedworks,
surface finish conditions are equally important as the pinch itself. The scoring on sleeve liner you describe may not easily hone put, resulting a sealing loss . depends on the damage.....you can ship the piston and set an I will let you know after iinspection. Ray |
Ray,
Here are a couple pictures of an O.S. .30VG set. Do you think this set is worth sending in? The gouge in the sleeve can be felt with your finger. What worries me is the spec of what appears to be brass showing through. Thanks. https://preview.ibb.co/fvQq99/20180922_112912.jpg https://preview.ibb.co/jMrmhU/20180922_112834.jpg |
I wa going to ask a similar question as above. When I pulled my motor for cleaning I noticed a sngle scratch on the skirt on the rear port side it does go up to the carbon line but not all the way up motor still ran fine before being pull. Is it worth being pinched? It’s has about 5 gallons now it’s a b2101 |
unsolvable
Timjs, your p + s set is insalvagable....sorry.
Soryer, your set doesn't sound much better....although is still running. |
| All times are GMT -7. It is currently 11:16 AM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.