Now accepting new orders again
 

My website guy Jim will lift our website main page anouncement dated January 16th would be taking reconditioning-resizing orders again....back to work a few days earlier than expected.

All orders that have arrived here the last few weeks have been serviced Friday + Saturday (two long days) with return shipping packages first thing the AM this morning, when Post Office opens. Tracking numbers will be emailed to you guys. Thank You for being patient. :)

Many new engines out there now guys. The one thing we're finding they have in common IS that they are with tightly matched piston + sleeve sets. I only seen so far "one" damaged set resulted a poor breakin this last batch of 17 sets serviced. Not good odds. Enough said. Just be patient guys.....

:tire:

3 weeks focusing on reconditioning-resizing work only
 

Nows a good time to send your worn piston+sleeve sets. Confirmed today back on my real job in 3 weeks. Turnaround time should be very good for the time being.

Today I repaired a new engine set damaged at breakin. Material lifting and burn marks at exhaust port both liner + piston. Take your time breaking in these new engines guys. Preheat and wrap heads, ESPECIALY in cold enviroments.

Today also repaired a overpinched set. Do what you goto do there guys but remember im here to bail you out if needed. atleast 25% of my work at this time. No problemendo.

So mnuch for abynormal...Other sets were easy comparatively speaking here.

Again . Text or email me with any questions or concerns.

Tomorrow I goof off and work on my own engine projects.:)

As allways...I appreciate your buisness. Thank You!!!


[email protected]

Ray do you re-bush rods? I heard / read this some where.

A project to be backed with DEEP POCKETS
 

bigjayjay1,
No I do not. Done a few with spare shop time just for shits and giggles in the past with OK prototype tested results. In my book "Not enough to right home to moma about". Bottom line, I found both before and after it would not be a cost efficient process FOR ME, especially in consideration Novarossi conrod quality. Will be a hell of a manufacturing/reconditioning process anyone to match, at an aprox $45 NIB replacement cost and having that of their longevity. Not saying cannot be done , mainly a project for a team with manufacturing rc engine parts development for retail ambitions. Furthermore, looking back 8 years at the beginning stage (1st full 2 years) sacrificed income developing my resizing tooling along with the procedure used today, I dont have the time to vest today with all that debug. Enough said. Hope this helps. RayAracing

do i just put my P/S in a box and send it to you? Do you take pay pal? Do you want me to clean it first?

I have a worn vspec P/S. I would like it pinched.

nevermind. I went to your website.

Thanks Ray

Resizing tool
 

Do you sell the tool you use to do this i know u did a year ago. I know is not cheap but im wanting to make a investment to do my own and friends P/S. Thanks speedy

Not operating toolroom equipment
 

Speedrob, Nothing instock at this time, and will not be operating toolroom equipement thru this month.

Dreaux, Glade you found the order form with shipping instructions.

RayA

Ray how are you doing I see your post where you up and running again, feels good to be working again I'm sure. Just curious if you got my p/s done if not don't worry about it. THANKS!!!!

Ray, you can just melt Greg's piston and sleeve down and make me a necklace lol jk Greg. Im glad your back up and running Ray. You'll have a sleeve coming your way soon.

A.J. Nelson

shipped with tracking number
 

Label/Receipt Number: 0308 2040 0000 4244 4535
Class: First-Class Mail®
Service(s): Delivery Confirmation™
Status: Delivered

Your item was delivered at 10:12 AM on January 14, 2010 in VINA, AL 35593.



Track and Confirm

Enter Label/Receipt Number.

Enter Label / Receipt Number.




Detailed Results:

Bullet Delivered, January 14, 2010, 10:12 am, VINA, AL 35593
Bullet Out for Delivery or Available at PO Box, January 14, 2010, 8:42 am, VINA, AL 35593
Bullet Sorting Complete, January 14, 2010, 8:12 am, VINA, AL 35593
Bullet Arrival at Post Office, January 14, 2010, 7:15 am, VINA, AL 35593
Bullet Processed through Sort Facility, January 14, 2010, 12:10 am, BIRMINGHAM, AL 35222
Bullet Processed through Sort Facility, January 13, 2010, 7:53 pm, BIRMINGHAM, AL 35222
Bullet Processed through Sort Facility, January 12, 2010, 2:28 am, ROCHESTER, NY 14606
Bullet Processed through Sort Facility, January 11, 2010, 6:02 pm, ROCHESTER, NY 14606
Bullet Acceptance, January 11, 2010, 12:19 pm, ORCHARD PARK, NY 14127

Ok thanks ill keep u in mind. Speedy

thanks
 

OK AJ

Please help Greg locate that package. Probobly lying under a National Geografic magazine :cool:

Thanks Ray, but you and A.J stick to ya's career though you comedian life stinks though.:ha: