R/C Tech Forums

R/C Tech Forums (https://www.rctech.net/forum/)
-   Offroad Nitro Engine Forum (https://www.rctech.net/forum/offroad-nitro-engine-forum-157/)
-   -   Rayaracing sleeve resizing and tooling (https://www.rctech.net/forum/offroad-nitro-engine-forum/306760-rayaracing-sleeve-resizing-tooling.html)

RayA 04-24-2010 07:55 AM

Orders shipped
 

Originally Posted by Soapy (Post 7312754)
Hi Ray,

Just wanted to ask if my piston/liner sets have arrived at yours yet from Australia.

Cheers

Kev Lewis

Hi kevin,
Your order was serviced and return shipped USPS International Priority 4-22-10. Orders recieved yesturday and this morning will go out first thing Monday morning guys:nod:

RayAracing

Soapy 04-26-2010 02:49 AM

Thanks Ray, your a champ

Russ G. 04-26-2010 07:15 PM


Originally Posted by RayA (Post 7274874)
Yes Russ. Arrived yesturday and serviced, and return shipping USPS Priority mail this morning. Plus 4 came out nice :nod:

Orders from LasVegas , England, and the UK going out too. Nothing remains on the bench untill USPS and Fedexx, and UPS drop off this afternoon :)
Thanks Guys!!!

RayAracing

Ray you were not kidding it came out nice. Broke it in, re-tuned it, and it runs like a top. I swear it runs better now! Thanks again!:D

donrod 04-27-2010 08:34 AM

Ray, got my sleeve looks great will have two more coming soon, thanks for the fast turnaround. Donnie Rodriguez

RayA 04-27-2010 03:16 PM

Fast turnaround time
 

Originally Posted by Russ G. (Post 7324415)
Ray you were not kidding it came out nice. Broke it in, re-tuned it, and it runs like a top. I swear it runs better now! Thanks again!:D


Thank You, Russ G.
Your set just needed a little freshen up....total seal condition was not as bad as most. Working from the top (TDC) area down, your sets sealing capabilities weakest at points mid and above porting window, that which sleeve alloys were reconstructed only a few tenths of a thousandth one inch (0.00025") to re establish your sets new improved fit = MATCHING.
Glade you like the results the procedure that would not have happened without racers support. These past 9 years has givin me quit a bit to be thankfull for. Enough said :) I hope.. .


donrod, I appreciate the repeat business.

Packages received yesterday went out USPS today guys.

RayAracing

dcracing 04-27-2010 05:24 PM


Originally Posted by RayA (Post 7290871)

dcracing , I went a tad lighter your set so you wouldn't feel pressed for time. Glad worked well for you. Thanks again!!

RayAracing

2 gallons still going strong, and lots of compression. Still holds w/ flop test.
I'm impressed. Thanks Ray.

RayA 04-28-2010 08:50 AM

resized novarossi P5XLT
 

Originally Posted by dcracing (Post 7328771)
2 gallons still going strong, and lots of compression. Still holds w/ flop test.
I'm impressed. Thanks Ray.

Donnie O ?
You must be doing some racing there in NC with serviced P5XLT delivered you around April 15th. "Resized 4+1/2 tenths"? Please let us know how she is running after the 4th reconditioned-resized gallon mark. My experience with the Italian based engine models I guess has been with results you could write home to moma about ? hee hee

Packages arrived here yesturday are serviced + going out now durring my lunch break.

RayAracing

dcracing 04-28-2010 02:29 PM


Originally Posted by RayA (Post 7331928)
Donnie O ?
You must be doing some racing there in NC with serviced P5XLT delivered you around April 15th. "Resized 4+1/2 tenths"? Please let us know how she is running after the 4th reconditioned-resized gallon mark. My experience with the Italian based engine models I guess has been with results you could write home to moma about ? hee hee

Packages arrived here yesturday are serviced + going out now durring my lunch break.

RayAracing

2 race weekends and quite a few "test and tune" sessions. Weather here is nice. Yes, you have the right guy here. I'll let you know after 4 gallons, should be around May 15th.

RayA 05-01-2010 06:41 AM

RayAracing piston+sleeve reconditioning-resizing orders shipped
 
Packages recieved Thursday and Friday serviced + return shipped USPS half hour ago. Monday and Tuesday deliverys is calculated. Thursday was my race day so worked long and hard yesturday ;) Thanks guys

Today is a good day to call me with any questions....tomorrow I will race again if weather permits it.

RayAracing

lanmine657 05-01-2010 06:54 AM

Thanks again Ray for fixing my B5, it was a sad 1/2gallon mark my comrod ended up breaking and for sure killed that thing. Should have let it break in longer, went race pase and temps on tank 6 and she was flying till it poped and stoped. Thanks again and dont worry( it was my fault ) I will still send u my motors when the time comes and I would recommend your service to all.

RayA 05-01-2010 08:14 AM

B5
 
Landon,
Thanks for the heads up. Very helpfull + huge part of getting to know the engine
Charactoristics with related my related resizing process,with bearing wear factors'.That engine model cranks some power, no doubt.Light or Light-medium tightness for all B5's now.ship the complete engine to me if you wish. I will pay the shipping. I would like to inspect Present conditions. RayAracing


Originally Posted by lanmine657 (Post 7345203)
Thanks again Ray for fixing my B5, it was a sad 1/2gallon mark my comrod ended up breaking and for sure killed that thing. Should have let it break in longer, went race pase and temps on tank 6 and she was flying till it poped and stoped. Thanks again and dont worry( it was my fault ) I will still send u my motors when the time comes and I would recommend your service to all.


RayA 05-03-2010 06:18 AM

Monday started at 5am to complete orders
 
Guys,
Please use the reconditioning-resizing order form http://www.rayaracing.com/resizebuy3.htm listed on my website. I must have a CLEAR return shipping address with email/phone contact info. This simple 3 step process has worked well for the past "nine" years.

Thank You,

RayAracing



Step One: Put your piston/sleeve sets and payment in a padded envelope. If you are paying via paypal, our paypal address is [email protected]. Money orders payable to Ray Aronica. NO PERSONAL CHECKS please. Cash is OK. BE SURE YOUR RETURN SHIPPING AND EMAIL ADDRESSES ARE CORRECT!

Step Two: Address your package to:

RayAracing
C/O Ray Aronica
73 North Lane
Orchard Park, NY 14127

Step Three: Click the button below to submit this form to us so that we know to expect something from you. This allows us to minimize our turnaround time and to better track your order. After that, simply mail your package to us. Our turnaround time is 1-2 days. Thanks for your business!


paypal
We accept Paypal!

rageworks 05-03-2010 11:58 AM

Ray, I just sent you a USPS PRIORI-TIE box in the mail.
I'll call you about it this evening. Your comp should have
already spit out my order form.:lol:

RayA 05-03-2010 06:45 PM

order form complete
 

Originally Posted by rageworks (Post 7353987)
Ray, I just sent you a USPS PRIORI-TIE box in the mail.
I'll call you about it this evening. Your comp should have
already spit out my order form.:lol:

Thanks Jeff,
That send button is the bomb....Now I got a printed copy :nod: I'm good a printed copy inclosed in package with piston+sleeve sets. Iether way keeps things simple there. Again ,Thanks!

Orders recieved Saturday shipped this morning, and todays arrivals ship tomorrow.

RayA 05-05-2010 12:51 PM

same day service 2day
 
Jeff, Joselito,Jake, Jarodd arrived serviced and return shipped today. :rolleyes: Now tomorrow if all packages are with first name starting with "K" i'll worry. LOL

Thanks guys

RayAracing


All times are GMT -7. It is currently 10:09 PM.

Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.