Ray can you do a OS .25xz-p??

Just thought id put the quote in from ray from just two pages back about how many times stuff can be repinched

__________

I am hoping my set will arrive for recondtioning this week~

odd local guy uses the rayaracing system and he sponsors me and I have had one brand done over 5 times before I sold it to a local who has had it done at least once...the 5 times I had it done didnt "need" it but I always liked to have it snugged up when going to bigger races

getting caught up today
 

anthony, Thanks for the heads up. As noted on invoice , one set slightly tighter than other. Please make refernce to next prefered tightness requested when ordering service again.

Dr. Evil, My experience has been "one" piston+sleeve reconditioning-resizing service, mabee "two", before the sleeve-case fittment is altered to its extream. There are a few guys that like a "Light" tightness that may get a third, but not very likely in the same race season. Monty at Houstons Engine Services has ran many resized engines to date with his mention above about surface finish conditions is key,and every thing to do with a piston+sleeves longevity. Thanks for posting my previous post Martin :nod:

bigjayjay1, I do ALL car,truck,buggy,and truggy engine models....12 thru 46 sizes. Along with many marine,and small block airplane engine models requested specialy by repeat customers.

NitroriousRC - Martin, Your package from Australia should arrive here in the next day or two.

I will be here working thru today and into tomorrow if any questions guys...........call, text, email, or post here on RCTECH

RayAracing

all caught up
 

Martin, Your package did arrive here in the states today. Will service and return ship tomorrow. Aaron and casey's package will go out also. Thank you

RayAracing

one coming you way very soon Thanks

ray.my set already arrive ur site from malaysia?

ARRIVED 11AM TODAY
 

Arrived here 11am, serviced with all came out very nice with good for vspec tightness, and good for GRP tightness. Return shipping very shortly after I eat my already late lunch :D last nights left overs

RayAracing

Hi Ray, great news that its arrived~
Looking forward to hearing how it went once its done.
Cheers man~

:)

thanx ray.make sure All al tight as new!!!2 set is speed 1 set is vspec and another 1 is grp.

a tad lighter than new
 

You will find just slightly lighter than was when new. Keep me posted.

RayAracing

after working with Ray for a few sets , i would give him feedback on the sleeve tolerances and got it "just right" . now i dont even question or bother to mention as Ray is "the man" when it comes to this resizing stuff:nod:

keep up the good work Ray !!

oh.thanx ray.so all the P/S and conrod all in great condition right?:ha::ha:

Serviced piston + sleeve
 

NO)) Piston+ sleeve sets look great....... replace conrods after rebreakin;)

will do.thanx

USPS Global Priority 6-10 days
 

Your welcome

Your package return shipped USPS Global Priority mail with calculated 6-10 day delivery. Please confirm arrival, and email me with any further questions. Your sets came out very nice (no problem with surface finish conditions, etcetera) so I will expect an easy rebreakin , with no troubels.

Un like the (4) sets came from Kentucky :eek: piston pitting, headbutton pitting, liner scratches, out of round conditions. Fortunitly the liner scratches honed out nicely, with only 1 set inspected only a few light-light piston outside diameter scratches. Even still a longer rebreakin is to be expected.

To my country place now to winterize, and complete a few projects never got done because I too busy playing with toy cars all year, LOL :D

Call,Text, or email me with any questions guys....

And thanks for the FeedBack MONTY HOUSTON.....I'll be sure to double up the peanuts with your next package :D

RayAracing

Hi Ray, just wondering how mine came out?

thanx ray.after rvc.will try and post some feedback here.thanx sir.;);););)

Ray, received my packaged today.. amazed with the quality of your work! will recommend to anyone.. people don't think it twice before using his services

YOU FOCKER!!! :lol:

Ray rcv all the P/S today.woh it look great!it really like alive the piston and sleeve.woh...will break in and post some feedback here

Did Ray get stuck on a Mountain?
I've posted here and emailed, and no response.
I think someone needs to organize a search party!

"looks great" im sure
 

William,
Hope your pleased. Thew 1st of two Speeds was the loosest of (4) sets serviced. All resized just a tad lighter than my medium tightness. Yes, keep me posted. As I am allways looking at results as seen by the racers. Thanks!!!!

Jerrys vspec + HPI 4.6, Burts N21R, Pedrs MG66 + Hyper 7, Jasons OS 25 XZ, Jaimes OFNA 28 + Nova 21-5K + plus 4 serviced and return shipped. Working thru untill late to get the rest out tomorrow.....call me with any questions guys.

RayAracing

Ray was wondering if you got my package 25

sorry Martin
 

Sorry Martin,

In fact I was up on the hill at my country place hanging Birch wood in the garage for 3 days. Got a very small section to do tomorrow. Your package should get to you late this week / early next.

RayAracing

http://i772.photobucket.com/albums/y...h_IMG00137.jpg

Hey Ray,

Wow, that was quick ... Hope to see it tomorrow or the first of next week. BTW, it is a N21BF :rolleyes:

Hey Ray,

I received my P/S set yesterday :D I am a machinist at heart and have a small "hobby" workshop ... you do OUTSTANDING work !!!

One question though ... on the paperwork you wrote .0004". Is that conrod wear?

TIA

Some feedback for you Ray.
I finished breaking in my MG66 last night (one of em anyway so I can race this weekend) All is good and break in was very easy.
Car runs smoothly, idles great and has plenty of stick.

Thanks again for outstanding service.

performance same as new?i will doin my motor next week.

So far so good, I will have it at the track this Saturday night.

I think I will sneak down tonight for a little practice.

Ray,
Email me at [email protected] or call me at 731-414-7177 when you have a minute. Been trying to get in contact with you for the past week. Have some questions and a motor that needs your attention.
Mike G

referenced sleeve resizing
 

Burt,
Thanks! Depending on the level of wear inspected your piston to sleeve fit when recieved is the amount I resize the sleeve to reastablish a good seal again. The (0.0004") 4 tenths of one thousandth of an inch indicates refernced resizing done that set. This is my procedure every set I handle, and assists me with accurate results. I also note inspected surface finish conditions, and when honing performed if found nessissary.If there are any questions, I can just pull a customers invoice for review. Hope this helps.

RayAracing

Hi Ray, i think Australia post must be on strike or something and unfortunately my set is yet to arrive. Checked with the mailman again this morning (Saturday) and nothing as yet, so hopefully it will be sometime after Tuesday.

Wednesday brang no joy either

Keen to hear if it was possible to be redone as i know it was fairly worn out, and the anticipation of if it turned out good or not is killing me lol.

Hey Ray,

I'm in Australia as well, there must be some hold up as my parcel has not arrived either. Was sent on the 4th by one of your earlier posts. Just to add to that I have been waiting for a parcel from A-Main as well and it is way late as well. Must be a delay somewhere.

Pedr.

Hey man, its good to hear im not the only one, ive been waiting for the con rod and pin for my motor to come from the Netherlands for a month or so.

Maybe our parcels were on an Airbus A380!

/edit
I think thats what has happened!
http://auspost.com.au/about-us/qanta...rtnership.html

Will it looks like there is a postal issue somewhere. My A-Main order arrived today and it was ordered 5 days after my repinch order was shipped back. Does anyone in the US now if there is a way a international priority parcel can be traced. It has been 15 days so far on the return leg and my last order was there and back in 18 days.

Pedr.

Just got an e-mail back from Australia post saying that there is up to a 3 week back lodge of mail coming out of some areas of the USA. So i'll just have to wait a while longer.

Pedr.

Ray.FANTASTIC!FANTASTIC i should say....
after break in my os speed.replace new front and rear bearing.woh...today i run it in my house garden..my motor is running like new.IDLE like no tomorow.temp hold very very well.....thanx ray.for only 20usd i save my flame out os speed running like new.it scream now,hold the tune idle like no tormow!will running this rebuild motor for the coming month race in my town Malaysia here.i think this is 1st pinch sleeve motor in malaysia race.fastastic!!i love this.i will send u more p/s for the day come.all my local racer they never belive this resized can recover a old motor even myself also same 20usd a try why nop??.now they know RAYA u r the man.:sneaky::sneaky::sneaky:

Thanks William
 

William,
Thanks for posting results your pleased with. The other (3) Piston+Sleeve sets came out just as nice. Surface finsh conditions looked very good all (4) sets. Talk again :nod:

RayAracing

in shop thru evenning today
 

Any questions guys today is a good day to call, text, or email me

RayAracing