|
21-7fms
Well Monty I ran about 6 tanks through the new tuned 21-7fms last week, just trying to get her completely broke in. I have a 90' x 180' track on the back of my propery. It was a beutifull day today so I put it to work on the track for the first time. My set-up was an od97t plug, dyn 053 pipe and ascendancy 1.0 sprung clutch. I liked the power it provided for truggy. Took me a little to get the bottom dialed in but once I did it's an excellent running engine. Coming from the soft bottomed GRP'S the Novarossi put a nice smile on my face.
Thank's alot. looking forward to the P5XLT now! |
Originally Posted by tristyn
(Post 8425037)
Well Monty I ran about 6 tanks through the new tuned 21-7fms last week, just trying to get her completely broke in. I have a 90' x 180' track on the back of my propery. It was a beutifull day today so I put it to work on the track for the first time. My set-up was an od97t plug, dyn 053 pipe and ascendancy 1.0 sprung clutch. I liked the power it provided for truggy. Took me a little to get the bottom dialed in but once I did it's an excellent running engine. Coming from the soft bottomed GRP'S the Novarossi put a nice smile on my face.
Thank's alot. looking forward to the P5XLT now! I thought the p5 was for a friend?? ;) |
p5
it is! I will be there to help him out and give it a run myself.
|
Originally Posted by tristyn
(Post 8425276)
it is! I will be there to help him out and give it a run myself.
" lean it out!!! its not mine " :lol: |
Hello Monty,
Here's what I will get on my first order (this will be my "A" practice engine but will get me going at track early on as well) N21.R Limited with 15009 crank and 28002 Turbo button 9901 SS pipe with 41021 header 6 Odonnell 97T plugs should be a killer little engine! :D |
Originally Posted by Trevor Williams
(Post 8428159)
Hello Monty,
Here's what I will get on my first order (this will be my "A" practice engine but will get me going at track early on as well) N21.R Limited with 15009 crank and 28002 Turbo button 9901 SS pipe with 41021 header 6 Odonnell 97T plugs should be a killer little engine! :D |
much love yo.......much love ;)
|
Originally Posted by Trevor Williams
(Post 8428340)
much love yo.......much love ;)
|
We are square and I will call you soon!:)
|
Originally Posted by motomanpat
(Post 8430661)
We are square and I will call you soon!:)
|
Originally Posted by houston
(Post 8431459)
are you sure? i dont remember givin ya any moolah for the xxx-4's? :weird: did I :confused:
|
Originally Posted by houston
(Post 8430357)
one thing i do very well bro , i would recommend a 17011 front bearing though ;)
|
Originally Posted by motomanpat
(Post 8431668)
Yes for sure as I have quite the memory for money:) In fact it was at Harrisburg if I do recall. Isn't it fun buying a house:weird:
|
Originally Posted by Trevor Williams
(Post 8432381)
okay......throw it in :D
|
im all about a pimped little 3 port :ha:
|
| All times are GMT -7. It is currently 09:41 AM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.