ninja mr21-b01
 

i see you posted you have p/s/r for the b01, do you still have them

Do you still have any left?

I had just got one of these engine from the to go at track. Man all can i can say is awesome as engine. i have the mario rusio tuned vigine. this guy got an engine sponser so hey never ran it but did break it in. i pissed alot of people off at the track cause they all wanted it. now i can see why. I also have enoguh parts to build this thing 4 times over i think and two cases and head all brand new. or at least that what i can see. we did not really go digging in his box of grp parts but they all all seald in the orange boxes and both blocks also to much stuff. But any way what springs are people running for an m2c2 for truggy with this engine? i had point .90 and .95 but i think i have to up it to get some rev or it could be cause this still has a lot of pinch yet and has not dropped all it balls yet.

Hi guys, I am now the proud owner of the much discussed "GRP Engines 21 tuned line" I have been reading a lot of posts here in this thread about people missing parts, specially the conrod for this engine ( LOSR2043 ) - whats the latest news in this old subjekt.. does any current available rod fit this old mill or do i just run it till it blows up ? :-)

If anyone could post a link to a conrod that will fit this engine i would be happy! :-)

//CC

run it till it stops get it pinch if it good for another one. I do not think you will find rod or piston anywhere. but if you need some seal and plugs I still got some spares left. im still running mine but once it goes it on to the alpha next

The Ascendancy G5 is the same engine with a silver head. You can contact Jason Anderson on here for parts or engines and pipe combos.

did not know of that g5 cool i guess i can keep a back up. you got a link to this guy.

I do. [email protected]. He is from the area close to the Moore, OK so give him some time to answer the email. He is a great guy and I know he will be happy to help you out.

I have some engines and parts I am selling for a friend.

http://www.rctech.net/forum/r-c-item...nes-pipes.html

Oh.. btw - thanks guys! Im actually quite positively surprised with this engine, its got some good grunt despite the age! I will wait and see about my need for parts.. for now its running fine :-)

Have a nice day

//CC

Need plugs !!! #4 !!!! Don't want to let this engine gooooooooo !

you want grp plugs i got some left over. only problem is im not in town to get them till sunday. i think i got 3 left for the tubor head and some needles and seals can double check on sunday if that not to late for you

no problem lmk !

ok will do

Guys

I have two Brand new piston and sleeves sets for GRP based engines. I also have about 20 plugs I can hook someone up with. Lastly I have 5 seal kits that are used to rebuild the engines and includes all seals.

Hey Janderson sent you a pm !!!!

I believe GRP made their own, as well as to other brands, but I can't recall which. Just look at the plug to see that the threads doesn't bottom out, some is threaded all the way and others isn't, make sure it seats well as well.
If nothing else maybe you could send a PM to Rody (believe he's called VS Racing here now) as his Tecnopower engines was based on this design, maybe he at least knows what doesn't work.

Thats correct Nitrovein:

https://www.rctech.net/forum/members...dy-191340.html