Northwest FOR SALE!
Tech Champion
iTrader: (13)
Awesomatix A12 Roller - SOLD
Lightly Used. This is my backup car, but I just don't have the time to race it anymore.
Comes with:
1 full set of BSR Purple Stripe Spec Tires
3D printed Front Bumper
Optional SCS Pivot
MXLR Carbon Fiber Electronics Plate
1Up Racing Titanium Screws
MKS HV50P Servo
Sagami Servo Saver
Lightly Used. This is my backup car, but I just don't have the time to race it anymore.
Comes with:
1 full set of BSR Purple Stripe Spec Tires
3D printed Front Bumper
Optional SCS Pivot
MXLR Carbon Fiber Electronics Plate
1Up Racing Titanium Screws
MKS HV50P Servo
Sagami Servo Saver
Last edited by Korey Harbke; 02-07-2024 at 09:19 AM.
Tech Elite
iTrader: (29)
Closet Cleaning: 1/12, TC, F1, Euro Truck, XB4 buggy
Pics to come soon, no trades, no holds without payment, first come first served.
All cars are rollers unless specified.
1/12: VBC Lightning - $140 - SOLD
· Carbon and Alum Chassis
· Multiple Diffs, Chassis Parts - Enough parts to build a second car
· Handful of cut foam tires
· GT12 tires NSX body and Protoform AMR
· Original Box, Manuals
· Can add Servo, ESC, Motor +$100
TC: Xpress XQ2S - $120
· XRAY CVDs
· Enduro Winner and March Madness Scale Spec Winner
· A few spare parts, sway bar kit
· Bitty Agata (Lambo) body
· Original Box, Manuals
· Can add ESC, Motor, Servo +$80
F1: Tamiya F104 F60 Ferrari - $80 - SOLD
· Includes Digital MG servo mounted
· Includes a set of mounted Pit Shimizu F1 tires (these are the very best)
· Bearings
Eurotruck: Tamiya Buggyra Fox TT-01 - $140 - SOLD
· Unpainted, new body, new stickers
· Comes with a Montech Euro Truck body for bashing
· Avid Bearings
· Includes Tamiya ESC, Silvercan motor, original box
XRAY XB4 2020 - $225
· Freshly rebuilt shocks and bearings cleaned
· Includes original box, slipper and center diff
· Includes Trinity 24KO 13.5T motor
· Has JConcepts Chassis Protector
· Can add Body, Mounted Pins or Slicks, Wing (+$20)
· Can add Servo, ESC (+$60)
Pics to come soon, no trades, no holds without payment, first come first served.
All cars are rollers unless specified.
1/12: VBC Lightning - $140 - SOLD
· Carbon and Alum Chassis
· Multiple Diffs, Chassis Parts - Enough parts to build a second car
· Handful of cut foam tires
· GT12 tires NSX body and Protoform AMR
· Original Box, Manuals
· Can add Servo, ESC, Motor +$100
TC: Xpress XQ2S - $120
· XRAY CVDs
· Enduro Winner and March Madness Scale Spec Winner
· A few spare parts, sway bar kit
· Bitty Agata (Lambo) body
· Original Box, Manuals
· Can add ESC, Motor, Servo +$80
F1: Tamiya F104 F60 Ferrari - $80 - SOLD
· Includes Digital MG servo mounted
· Includes a set of mounted Pit Shimizu F1 tires (these are the very best)
· Bearings
Eurotruck: Tamiya Buggyra Fox TT-01 - $140 - SOLD
· Unpainted, new body, new stickers
· Comes with a Montech Euro Truck body for bashing
· Avid Bearings
· Includes Tamiya ESC, Silvercan motor, original box
XRAY XB4 2020 - $225
· Freshly rebuilt shocks and bearings cleaned
· Includes original box, slipper and center diff
· Includes Trinity 24KO 13.5T motor
· Has JConcepts Chassis Protector
· Can add Body, Mounted Pins or Slicks, Wing (+$20)
· Can add Servo, ESC (+$60)
Last edited by R3VoLuTiOn; 02-09-2024 at 10:35 PM.
Anyone going to the shop race have an AMX A800 MMX right rear carbon lower arm they want to sell? Just found a nick on mine. Thanks in advance-Alvin
Tech Rookie
I've got some older gear that has been stored for a few years since we got out of the hobby. I'm looking for new local homes for the following:
Electronics:
- Sanwa MT-44 2.4Ghz radio with two receivers with aftermarket soft case
- Airtronics M-11X 2.4Ghz radio with one receiver, two rechargeable battery packs and AC adapter with aftermarket soft case
- iCharger 406 Duo li-on battery pack charger. Requires a power supply.
- ProTek 500w power supply
None of the above has been tested.
Xray T4 '18 1/10th scale sedan stuff:
- Probably enough chassis parts and hop ups and other miscellaneous bits to build one or two cars, including two carbon fiber bottom decks. One of the chassis with an aluminum bottom deck is almost complete and includes a steering servo.
- Maclan speed control, Maclan 6.5T mod motor attached to a partial Xray aluminum bottom deck chassis.
Other:
- Set of Sky RC RSTW electric tire warmers
- Hudy 10th scale set up system
Please inquire/make offers. Photos available upon request.
Electronics:
- Sanwa MT-44 2.4Ghz radio with two receivers with aftermarket soft case
- Airtronics M-11X 2.4Ghz radio with one receiver, two rechargeable battery packs and AC adapter with aftermarket soft case
- iCharger 406 Duo li-on battery pack charger. Requires a power supply.
- ProTek 500w power supply
None of the above has been tested.
Xray T4 '18 1/10th scale sedan stuff:
- Probably enough chassis parts and hop ups and other miscellaneous bits to build one or two cars, including two carbon fiber bottom decks. One of the chassis with an aluminum bottom deck is almost complete and includes a steering servo.
- Maclan speed control, Maclan 6.5T mod motor attached to a partial Xray aluminum bottom deck chassis.
Other:
- Set of Sky RC RSTW electric tire warmers
- Hudy 10th scale set up system
Please inquire/make offers. Photos available upon request.
Tech Fanatic
iTrader: (4)
F/s Tamiya f103-$190obo
Located In Puyallup, WA
selling as roller w/servo
3 wing sets
2 body's
*Installed parts*
-3 Racing top deck and servo mount
-Metal rear shaft
-Carbon reinforced front steer arms
-Carbon reinforced suspension mount
-Metal motor plate
-Set of Ride VR tires
-Servo saver
-Tamiya adjustable turnbuckles
-RD special king pin set
includes bag o' spares and original parts
20kg red box servo
*Spares*
-Axle offset spacers. Metal 3 racing and Tamiya plastic
-Tamiya f104 front end suspension mount
(TCS legal)
-spare gear case (sp-504)
-spare servo mount
-f1 tunbuckle tie rod set (op-150)
-o rings (ao-5042)
-RD special king pin set (op-119)
-original top deck
-carbon rear shaft
-F103 disc ball set x2 (sp-1347)
-Whip Racing lightweight screw set. (TCS legal)
-spur gears
-tie rod ends
-f103 carbon reinforced front upright set (op-1154)
-plastic original upright set (sp-395)
-e clips and various hardware
-original tunrbuckles
-1 spare upright
-f1 front spring set (sp-509)
-battery tray pieces
-gear ring spacers by 3 racing x2
-2 plastic original suspension mounts
-3 racing servo mount
Ty
-d
Last edited by MonkeyCmonkeyDo; 04-26-2024 at 05:00 PM.
Selling my tamiya TRF419XR with 420 suspension upgrade. Car has treated me very well and is a pleasure to drive. All parts other than chassis and bulkheads were purchased new in April of 2022. Few other upgrades are the adjustable suspension blocks, 420 spool & diff, alu outdrives, and PSM carbon battery holder. Only reason for selling is I purchased a 420x from a friend or else I would be using it for the upcoming season. Selling as a slider, no body motor or electronics. Asking $300 located in Seattle.