Wolcott Hobby & Raceway
11-09-2013 | 08:16 AM
#2821
Tech Regular
Joined: May 2009
Posts: 483
From: eastern,ct
Definitely going to run cooling holes in the body. My one worry is that the esc is going to be stressed and overheated. I keep reading saying it isn't made for 4wd mod, but in many photos of the 410 I see people running the original RS and RS Gen 2.
I don't plan on selling any of the parts. Supposedly the 2nd one I purchased with all the spares has black machined diff ring gears, whatever those are. I actually plan to pull the 2nd cars diffs and fill with different fluid so I can experiement by just swapping diffs.
See the rest of you tonight.
I don't plan on selling any of the parts. Supposedly the 2nd one I purchased with all the spares has black machined diff ring gears, whatever those are. I actually plan to pull the 2nd cars diffs and fill with different fluid so I can experiement by just swapping diffs.
See the rest of you tonight.
11-09-2013 | 11:11 AM
#2822
Tech Fanatic
Joined: Aug 2011
Posts: 783
From: Westchester NY
I'll try and get the pictures up later tonight or tomorrow. They will be posted at:
www.thercphotog.smugmug.com
www.thercphotog.smugmug.com
11-09-2013 | 04:05 PM
#2823
Get your race pants on peeps! Tomorrow is Sunday, Race day at Wolcott Hobby!! 4wd Buggy and 1/ buggy has been a huge turnout, and more its sold this week! Those look to be the BIG classes with 4wd Mod SC this winter at Wolcott Hobby. Come check out the massive track where you can really stretch out those RC legs and see some serious speed on a technical layout!!!
See you tomorrow!
See you tomorrow!
11-09-2013 | 04:40 PM
#2824
any guys running the Team Durango DEX210? Looking for a good set up for the indoor track. Mine DEX210 is set up 4gear mid motor with 35wgt oil in shocks all around with blue sbrings all around.
11-10-2013 | 10:13 AM
#2827
Tech Fanatic
Joined: Aug 2011
Posts: 783
From: Westchester NY
11-10-2013 | 06:10 PM
#2829
Slamming day at the track today, 16 4wd 1/10 buggies for club racing! YEAH!! A full heat of 1/8 scales, full heat of 2wd buggies, and it was good to see Rhodes back in the saddle with some rent a rides! lol!
Results for Friday and Sunday being posted tomorrow
We are open from 12 till 5 tomorrow
Thanks again for the support from the community!
Results for Friday and Sunday being posted tomorrow
We are open from 12 till 5 tomorrow
Thanks again for the support from the community!
Last edited by WolcottHobby; 11-10-2013 at 06:41 PM.
11-12-2013 | 08:13 AM
#2832
CT State Indoor Championship Race Venue for this Sunday 11-17
Race venue for this weekend's CT State Indoor Championship
Track opens at 7am. You must be registered and paid to go on the track. Starting at 8am we will be running 20 practice intervals rotating from covered wheel to open wheel. The track will close at 10:15am to prep it for qualifying. Qualifying starts at 10:30am. We will try to run 3 qualifiers and mains.
As racers you have the responsibility to be ready for your qualifier and take your corner in a timely fashion. Please be polite and do not make the racers wait and hold up the race program. You are required to sweep the line where you corner marshal at. The track has grooved quite well and little sweeping is required.
There is a pre registration open by calling the shop, or using my paypal addreees of [email protected] just list the classes and transponder number please. First class is $35 and each additional is $10. We have T-shirts for the first 40 entries only. If you do not pre-sign or show late, you may not get a shirt, sorry.
Looks to be a good turnout already, the track is dialed with very good traction. The renovations and improvements to the facility are noticeable as, well and tons of new pit stalls, as well as a new pit room. We have 115 stalls that are available with power.
Track opens at 7am. You must be registered and paid to go on the track. Starting at 8am we will be running 20 practice intervals rotating from covered wheel to open wheel. The track will close at 10:15am to prep it for qualifying. Qualifying starts at 10:30am. We will try to run 3 qualifiers and mains.
As racers you have the responsibility to be ready for your qualifier and take your corner in a timely fashion. Please be polite and do not make the racers wait and hold up the race program. You are required to sweep the line where you corner marshal at. The track has grooved quite well and little sweeping is required.
There is a pre registration open by calling the shop, or using my paypal addreees of [email protected] just list the classes and transponder number please. First class is $35 and each additional is $10. We have T-shirts for the first 40 entries only. If you do not pre-sign or show late, you may not get a shirt, sorry.
Looks to be a good turnout already, the track is dialed with very good traction. The renovations and improvements to the facility are noticeable as, well and tons of new pit stalls, as well as a new pit room. We have 115 stalls that are available with power.