Threads for pinion on chlutchbell 1/8 Track.
03-26-2017 | 08:13 AM
#1
Thread Starter
Tech Initiate
Joined: Sep 2004
Posts: 37
From: Norway
Threads for pinion on chlutchbell 1/8 Track.
Hi all 8scale track racers 
I prepare my stuff for a new seaon and found out that there are 2 different threads on some of my chlutchbells..... All my clutches are either Xray reverse or Shepherd VCC both with 1.0 module gears.
Anybody who knows whitch manufactures who have "fine" or "very fine" threads?
Se the attached photo to see the difference in the pitch of the threads.
I prepare my stuff for a new seaon and found out that there are 2 different threads on some of my chlutchbells..... All my clutches are either Xray reverse or Shepherd VCC both with 1.0 module gears.
Anybody who knows whitch manufactures who have "fine" or "very fine" threads?
Se the attached photo to see the difference in the pitch of the threads.
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
