|
thats no mtx-3 look at the where the wheels go it looks like the 1/8 scale quick tire change design
|
Hudy you crack me up.:lol: :lol: :lol: :lol:
It is a 1/8 a SMP slide. We are talking aobut the upper deck. How it's blue Carbon Fibre. And wouldn't it be cool to have a MTX-3 like it. That's all. :sweat: :nod: :nod: :rolleyes: |
Re: Negative diff
Originally posted by Grinder Anyone know where I can get a negative diff, I ordered one and the place did'nt bother to tell me they are out of them.:flaming: |
Originally posted by Nitropimp ok I measured the stock upper deck and it's approx 2.40. Should I get the 2mm and maybe save some weight or should I get the 3mm and have it the upper plate beefier????? Three color choices silver, gold and blue.... |
Originally posted by Bandeira Hi guys!! Just arrived from my weekend racing 600km away from home... An more-or-less important race for me... I was using my third engine... My car was running fine with 40/40 tyres, but then when entering the high speed sweeper i might have gotten my trigger to the neutral(I found that after the race) as I was using drag brakes, (which I am not very used to) my rear end slipped a little bit then the car flipped over... Results: Broken wing + broken rear bearing; At this time(as I didn't have enought time to work on the setup) I fitted some 45 tyres at the front, but at this time I needed to get plenty of Dual Rate for some turns, but wasn't flipping... I suppose I should try to get my rear end more bite when entering the turn so i can run on 40/40 tyres... Or maybe, make my rear end slip more and use 45/40 tyres... Any ideas/comments/suggestions/anything? PS: for the results, as It rained before de B Main(I jumped straight to the A Main - Roar style), I ended up with a 6th place overall... not bad for an improvised 45tyre half a minute before the qual. |
What springs are you using?
I sometimes run the Gray rear springs with the lt Blue front springs, That lets the rear steer a little. |
But since i've gotten the new Blue springs, I use them all around.
|
rjl ygpm
|
i'll try again rear toe 3deg. is that total or 3deg per side have hudy setup jig and would like to know
|
When someone says they run 3 degrees of rear toe that means 3 degrees on each side left and right. Same with camber, castor, ect..
|
stock mtx3 chassi 110.5 my prospec is 109.5
|
Originally posted by ilaybrk stock mtx3 chassi 110.5 my prospec is 109.5 |
Originally posted by theRED5 But since i've gotten the new Blue springs, I use them all around. I usually dial my car with the rear roll center... but this time it seems that got on the edge... I'm planning to stick up with the 45/40 tyres and just get the rear roll center a little lower so i get more steering... I would love if this car had front roll center adjustment... cheers... |
grams
|
Originally posted by Bandeira oh yeah... I'm with the dark blue all around... I usually dial my car with the rear roll center... but this time it seems that got on the edge... I'm planning to stick up with the 45/40 tyres and just get the rear roll center a little lower so i get more steering... I would love if this car had front roll center adjustment... cheers... |
| All times are GMT -7. It is currently 08:43 AM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.