which motor for mrx4
#16
Tech Master
RB
I know you're not commenting on the RB - they tune very easily.
#18
yes, I mean the collari..
you can get the best engine in the world, if you can't make the car turn properly, then it won't do you any good..
you can get the best engine in the world, if you can't make the car turn properly, then it won't do you any good..
#19
Tech Master
Re: which motor for mrx4
Originally posted by Speedypeterb
hey guys, just got the ok from the better half that I can get a mrx4, its going to cost me big time with her but it will be worth it.
I would prefer an RBconcepts but not sure which one any suggestions from the 1/8th guys thanks in advance Peter
hey guys, just got the ok from the better half that I can get a mrx4, its going to cost me big time with her but it will be worth it.
I would prefer an RBconcepts but not sure which one any suggestions from the 1/8th guys thanks in advance Peter
Novarossi or Rex 321P or if you can find R1 base. Honestly these 2 engines are more then enough for I would say 95% of 8 scale drivers in terms of power, smoothness and tunability.
If you want to edge it out, then consider modified engines like
Rex 321P tune, JP R03, Novamax MX21 and such.
On RB engines, their power band is down low, very torquey, so that will make your car looks really fast and powerful but on the same token, it is very hard to control and you will be fighting with the car all the time if the car is not set up perfectly to the track, tire, susp, and weather!
Just my $0.02
#20
Tech Master
RB
Header and pipe combos will change the power band on most motors (including RB's). Drop your nitro content if you are still too punchy. I can tell you that our RB's are the most durable motors we have ever run.
#22
Originally posted by Speedypeterb
thanks for all the imput, i will get the rbconcepts c5 and will remove the piston and sleeve and replace it with the Palmaris brb p/s set and will modified the crank. If any one needs a brand new p/s for the rb c5 make me an offer in a pm. Peter
thanks for all the imput, i will get the rbconcepts c5 and will remove the piston and sleeve and replace it with the Palmaris brb p/s set and will modified the crank. If any one needs a brand new p/s for the rb c5 make me an offer in a pm. Peter
#23
Tech Adept
Originally posted by Speedypeterb
thanks for all the imput, i will get the rbconcepts c5 and will remove the piston and sleeve and replace it with the Palmaris brb p/s set and will modified the crank. If any one needs a brand new p/s for the rb c5 make me an offer in a pm. Peter
thanks for all the imput, i will get the rbconcepts c5 and will remove the piston and sleeve and replace it with the Palmaris brb p/s set and will modified the crank. If any one needs a brand new p/s for the rb c5 make me an offer in a pm. Peter
Are you planning on running this car at the Sour Grapes at Ft. Myers. That would be the perfect place to test. Gimmie a call if you are heading over next week.
Thanks
www.twistertires.com