Serpent 733 1/10 200mm touring
#721
Gonzo
I think once you get the longer springs the 6mm of ride height will work. Unless the track is real bumpy. Then maybe 6.5mm.
I am using 40wt serpent oil and about 25% rebound. Also just for your info 40wt serpent is 1,000cst in other brands.
Good luck and keep us posted and we can offer help if you still need.
DJ Apolaro
I think once you get the longer springs the 6mm of ride height will work. Unless the track is real bumpy. Then maybe 6.5mm.
I am using 40wt serpent oil and about 25% rebound. Also just for your info 40wt serpent is 1,000cst in other brands.
Good luck and keep us posted and we can offer help if you still need.
DJ Apolaro
#722
Inspection car weight, with JR servos, NMHI batt., Stratus 3.1, Spectrum with temp telemetry: 1863 Gm. Lipos just ordered!
#723
Tech Regular
iTrader: (1)
Yep, I had the nut way to loose. That must had been the reason why I didn't have enough take off power. hmmm! I should have known that one.
I'm sure the 40wt oil will make a difference. I will make small adjustments first so that I can tell more accurately what was it that needed to be changed on the set up.
MCSMOOTH: I do race at LEISURE HOURS RACEWAY home of the 2009 ROAR NITRO OFFROAD Nationals. Is a good 50min drive from where I stay, but its well worth it. Man, you don't know how sad I am because I might not be able to do the Byron challenge I know I can at least make it to the A main on the GT class and get some $$$$
I will do my best to at least attend on Sunday maybe I can run a qualifier or two. I will let you know if I end up going so we can help each other out, maybe I'll have the spares for the 733 by then. Just in case...
I'm sure the 40wt oil will make a difference. I will make small adjustments first so that I can tell more accurately what was it that needed to be changed on the set up.
MCSMOOTH: I do race at LEISURE HOURS RACEWAY home of the 2009 ROAR NITRO OFFROAD Nationals. Is a good 50min drive from where I stay, but its well worth it. Man, you don't know how sad I am because I might not be able to do the Byron challenge I know I can at least make it to the A main on the GT class and get some $$$$
I will do my best to at least attend on Sunday maybe I can run a qualifier or two. I will let you know if I end up going so we can help each other out, maybe I'll have the spares for the 733 by then. Just in case...
#724
Tech Rookie
anyone know when the solid's and one-way coming out ?
#727
what brand long/short springs are you guys using on the 733, and where can I order them from
#728
Tech Regular
#729
Tech Elite
iTrader: (12)
Ok the long rear springs really does feel better. The car feels more planted and I didn't lose any steering. Like someone posted above I tried the old yellow as I don't have any of the new long springs but I ended up using the old red. Here is my current setup medium traction. Stratus 3.1 center post 31mm from windshield.
40's all around or 42 rear is working for me
Front:
Copied DJ's setup
Rear:
200mm track width
Long red springs 3rd hole on tower
serpent 40 oil (1000cst) 3 holes
3 camber/ 2 toe in
lower hinge pin top position
link mid inside/ inside on upright
2.3 sway bar
40's all around or 42 rear is working for me
Front:
Copied DJ's setup
Rear:
200mm track width
Long red springs 3rd hole on tower
serpent 40 oil (1000cst) 3 holes
3 camber/ 2 toe in
lower hinge pin top position
link mid inside/ inside on upright
2.3 sway bar
#730
Tech Elite
#731
Here's my GLC Setup:
Front
100K diff oil
0 droop
middle roll center position
car long
3mm caster in front of arm
5.5mm ride height
blue spring layed down
2 hole piston
40wt oil (1000 cst)
Zero toe out
1.5 camber
stock sway bar
ackermann in back position and wide
Rear
40k diff oil
2 droop
lowest roll center position on bottom pins
car long
camber link inner and 2nd position from bottom
2mm under link on outer position
6mm of ride height
long pink spring, 2nd hole up from bottom
3 hole piston
45wt oil (1400 cst)
2.5 toe in on each side
3 camber
stock sway bar
Other:
stock pinions and spurs
civic body
38 shore front, 42 rear
Front
100K diff oil
0 droop
middle roll center position
car long
3mm caster in front of arm
5.5mm ride height
blue spring layed down
2 hole piston
40wt oil (1000 cst)
Zero toe out
1.5 camber
stock sway bar
ackermann in back position and wide
Rear
40k diff oil
2 droop
lowest roll center position on bottom pins
car long
camber link inner and 2nd position from bottom
2mm under link on outer position
6mm of ride height
long pink spring, 2nd hole up from bottom
3 hole piston
45wt oil (1400 cst)
2.5 toe in on each side
3 camber
stock sway bar
Other:
stock pinions and spurs
civic body
38 shore front, 42 rear
#733
Here's my GLC Setup:
Front
100K diff oil
0 droop
middle roll center position
car long
3mm caster in front of arm
5.5mm ride height
blue spring layed down
2 hole piston
40wt oil (1000 cst)
Zero toe out
1.5 camber
stock sway bar
ackermann in back position and wide
Rear
40k diff oil
2 droop
lowest roll center position on bottom pins
car long
camber link inner and 2nd position from bottom
2mm under link on outer position
6mm of ride height
long pink spring, 2nd hole up from bottom
3 hole piston
45wt oil (1400 cst)
2.5 toe in on each side
3 camber
stock sway bar
Other:
stock pinions and spurs
civic body
38 shore front, 42 rear
Front
100K diff oil
0 droop
middle roll center position
car long
3mm caster in front of arm
5.5mm ride height
blue spring layed down
2 hole piston
40wt oil (1000 cst)
Zero toe out
1.5 camber
stock sway bar
ackermann in back position and wide
Rear
40k diff oil
2 droop
lowest roll center position on bottom pins
car long
camber link inner and 2nd position from bottom
2mm under link on outer position
6mm of ride height
long pink spring, 2nd hole up from bottom
3 hole piston
45wt oil (1400 cst)
2.5 toe in on each side
3 camber
stock sway bar
Other:
stock pinions and spurs
civic body
38 shore front, 42 rear
Thanks
Gael
#734
Tech Elite
iTrader: (12)
Here's my GLC Setup:
Front
100K diff oil
0 droop
middle roll center position
car long
3mm caster in front of arm
5.5mm ride height
blue spring layed down
2 hole piston
40wt oil (1000 cst)
Zero toe out
1.5 camber
stock sway bar
ackermann in back position and wide
Rear
40k diff oil
2 droop
lowest roll center position on bottom pins
car long
camber link inner and 2nd position from bottom
2mm under link on outer position
6mm of ride height
long pink spring, 2nd hole up from bottom
3 hole piston
45wt oil (1400 cst)
2.5 toe in on each side
3 camber
stock sway bar
Other:
stock pinions and spurs
civic body
38 shore front, 42 rear
Front
100K diff oil
0 droop
middle roll center position
car long
3mm caster in front of arm
5.5mm ride height
blue spring layed down
2 hole piston
40wt oil (1000 cst)
Zero toe out
1.5 camber
stock sway bar
ackermann in back position and wide
Rear
40k diff oil
2 droop
lowest roll center position on bottom pins
car long
camber link inner and 2nd position from bottom
2mm under link on outer position
6mm of ride height
long pink spring, 2nd hole up from bottom
3 hole piston
45wt oil (1400 cst)
2.5 toe in on each side
3 camber
stock sway bar
Other:
stock pinions and spurs
civic body
38 shore front, 42 rear