Serpent 733 1/10 200mm touring
06-10-2009, 04:32 AM
#46
Thanks for the information for Klaus. Michael also just gave it to me. Yes this was my first time out of the US for racing. Sorry if I gave the impression that other areas are not civilized, it was just all very new to me. I had a great time and learned a lot at this race. Tell Klaus I will be sending an email, as I need his address to send him something.
DJ Apolaro
DJ Apolaro
very easy to do
just one thing, i see on the cad drawings on the serpent site, the new engine mount, i noticed it has a solid section on the chassis, with possible stiffness settings ? and the top part of the mount is on the engine, so you can slide the engine back and forth with the screw from the top. was there any options for the stiffners on the lower section of the engine mount. cheers, Patto.......
06-10-2009, 04:46 AM
#47
what is up DJ ? you came home with one Hudy tuning driver too many ? hahaha
very easy to do
just one thing, i see on the cad drawings on the serpent site, the new engine mount, i noticed it has a solid section on the chassis, with possible stiffness settings ? and the top part of the mount is on the engine, so you can slide the engine back and forth with the screw from the top. was there any options for the stiffners on the lower section of the engine mount. cheers, Patto.......
very easy to do
just one thing, i see on the cad drawings on the serpent site, the new engine mount, i noticed it has a solid section on the chassis, with possible stiffness settings ? and the top part of the mount is on the engine, so you can slide the engine back and forth with the screw from the top. was there any options for the stiffners on the lower section of the engine mount. cheers, Patto.......
Later,
DJ Apolaro
06-10-2009, 05:02 AM
#48
I will check for the tuning driver. I have not even unpacked yet. You are correct about the stiffeners for the motor mount and how they work. It is very easy to do and can be done in the pits with screws on the spot. We tested it back to back with Jilles and the handeling difference could be noticed. It will be a great tuning option and very easy.
Later,
DJ Apolaro
Later,
DJ Apolaro
im liking this car more and more already
06-10-2009, 05:37 AM
#49
Hi DJ, we're glad you liked here. Hope to see you next year.
06-10-2009, 05:46 AM
#50
I had a great time in Turkey. The track was great and you guys rock.
Thanks for having me,
DJ Apolaro
Thanks for having me,
DJ Apolaro
06-10-2009, 06:50 AM
#51
Glad You had a good time DJ. Thank you for the Clutch setup seminar you gave. It was real good.
DJ was very busy during the weekend due to 2 classes but he did get a well deserved podium finish. And finishing 2 laps behind Robert is no easy task.
Congrats DJ. and Hope to see you again in Bursa.
Serdar "the Translator" (sounded like the transporter)
DJ was very busy during the weekend due to 2 classes but he did get a well deserved podium finish. And finishing 2 laps behind Robert is no easy task.
Congrats DJ. and Hope to see you again in Bursa.
Serdar "the Translator" (sounded like the transporter)
06-10-2009, 01:07 PM
#52
Tech Initiate
You guys are so lucky that you have a talent like DJ.
See you next year
See you next year
06-10-2009, 10:13 PM
#53
Nice work DJ. Proud to have a class act like you representing us aboard.
I saw sedans run for the first time in 2 years at the Kamikazi race last month. I could not believe how fast the sedan motors have gotten. So it is nice to see that Serpent has a new chassis designed to harness the power.
I saw sedans run for the first time in 2 years at the Kamikazi race last month. I could not believe how fast the sedan motors have gotten. So it is nice to see that Serpent has a new chassis designed to harness the power.
06-11-2009, 02:36 AM
#54
musti72 you have pm
06-11-2009, 10:51 AM
#56
06-11-2009, 01:12 PM
#57
06-11-2009, 01:53 PM
#58
Hi Guys, we are very excited about the release of the new car. We have being told that the car should be out late July. So plenty of time to test it before the Nats.
Price has not being released yet from the Factory, but we expect to have it next week. At the moment all we know is that the part# is 804000
We are getting a lot of orders. We are going to service the orders on a first come first serve basis. So if you are interested in the cars, make sure you contact your local LHS.
Price has not being released yet from the Factory, but we expect to have it next week. At the moment all we know is that the part# is 804000
We are getting a lot of orders. We are going to service the orders on a first come first serve basis. So if you are interested in the cars, make sure you contact your local LHS.
06-12-2009, 09:07 AM
#59
Sweet
