Shepherd Velox V10
05-30-2011, 09:11 PM
#1021
Tech Elite
iTrader: (102)
Join Date: Dec 2004
Location: Far away from Covid19 but close to 20
Posts: 4,129
Trader Rating: 102 (100%+)
Love my V10
Just had to drop a line on here.
3rd time out with my V10...
and all I can say ....is WOW>>>>>
the Brake system is Nuts and it corners fantastic.
car is freakin awesome....
I added a few option parts, which made a it very nice.
Team C rear brace, plastic one breaks..
but on the '11 servo saver spring..much harder...car reacts very direct.
Tried a few of the Shepherd springs....very nice.
and cut out a piece of kydex for the bumper-the car is bullet proof now (I hit a concrete wall more than once...bounced off without a problem)
3rd time out with my V10...
and all I can say ....is WOW>>>>>
the Brake system is Nuts and it corners fantastic.
car is freakin awesome....
I added a few option parts, which made a it very nice.
Team C rear brace, plastic one breaks..
but on the '11 servo saver spring..much harder...car reacts very direct.
Tried a few of the Shepherd springs....very nice.
and cut out a piece of kydex for the bumper-the car is bullet proof now (I hit a concrete wall more than once...bounced off without a problem)
06-01-2011, 06:31 AM
#1022
Just had to drop a line on here.
3rd time out with my V10...
and all I can say ....is WOW>>>>>
the Brake system is Nuts and it corners fantastic.
car is freakin awesome....
I added a few option parts, which made a it very nice.
Team C rear brace, plastic one breaks..
but on the '11 servo saver spring..much harder...car reacts very direct.
Tried a few of the Shepherd springs....very nice.
and cut out a piece of kydex for the bumper-the car is bullet proof now (I hit a concrete wall more than once...bounced off without a problem)
3rd time out with my V10...
and all I can say ....is WOW>>>>>
the Brake system is Nuts and it corners fantastic.
car is freakin awesome....
I added a few option parts, which made a it very nice.
Team C rear brace, plastic one breaks..
but on the '11 servo saver spring..much harder...car reacts very direct.
Tried a few of the Shepherd springs....very nice.
and cut out a piece of kydex for the bumper-the car is bullet proof now (I hit a concrete wall more than once...bounced off without a problem)
06-14-2011, 03:46 AM
#1023
locker front diff
Hey guys just wondering if anyone has tried the front locker diff in there car.
If so what weight/cst rear diff oil have you been using and what type of track have you tried it on ?
I race on a medium grip open flowing track in Australia.
At the moment i use 300k in the front diff and 60k in the rear diff, thinking the 60k in the rear might be a bit heavy....
Any suggestions one a good start point would be good..........
Thanks Michael
If so what weight/cst rear diff oil have you been using and what type of track have you tried it on ?
I race on a medium grip open flowing track in Australia.
At the moment i use 300k in the front diff and 60k in the rear diff, thinking the 60k in the rear might be a bit heavy....
Any suggestions one a good start point would be good..........
Thanks Michael
06-14-2011, 04:53 PM
#1024
Most of the download setup sheets at shepherds site are for a solid axle front.
06-15-2011, 05:46 PM
#1025
heloo velox v10 lover....
here it is my lover toys'
here it is my lover toys'
06-19-2011, 09:33 AM
#1026
hello guy send your v10 picture....
06-22-2011, 03:39 PM
#1027
hehehe....
haloo v10 fun were a u all
haloo v10 fun were a u all
06-28-2011, 01:49 AM
#1028
aloooooooooo velox fan....
06-28-2011, 02:48 PM
#1029
Suspended
06-30-2011, 01:53 PM
#1031
I finished my build and have a clutch question:
i assembled the clutch on an older Novarossi motor (m12?) from an older mugen kit. using all of the supplied washers, etc, there is a ton of end play. is the shaft on this older motor longer than a current .21 design? how long is the crankshaft on new motors?
thanks
i assembled the clutch on an older Novarossi motor (m12?) from an older mugen kit. using all of the supplied washers, etc, there is a ton of end play. is the shaft on this older motor longer than a current .21 design? how long is the crankshaft on new motors?
thanks
06-30-2011, 02:01 PM
#1032
I finished my build and have a clutch question:
i assembled the clutch on an older Novarossi motor (m12?) from an older mugen kit. using all of the supplied washers, etc, there is a ton of end play. is the shaft on this older motor longer than a current .21 design? how long is the crankshaft on new motors?
thanks
i assembled the clutch on an older Novarossi motor (m12?) from an older mugen kit. using all of the supplied washers, etc, there is a ton of end play. is the shaft on this older motor longer than a current .21 design? how long is the crankshaft on new motors?
thanks
U can try different collets to take up some of the distance
06-30-2011, 02:27 PM
#1033
07-01-2011, 06:26 AM
#1035
v10
alooo guy i want to buy v10
it is nice rc car
it is nice rc car