|
Originally posted by InitialD Somehow, blue looks good on the car ! :cry: |
Re: Re: Re: Re: Re: Re: Re: Re: Re: rear anti-roll option
Originally posted by InitialD Onkel Sow?:weird: Naaahh... He's too old to be doing that.:sweat: Besides, like you said, he's an old xxxxxx.:lol: |
Re: Re: Re: rear anti-roll option
Originally posted by markp27 Not sure if anyone can confirm it, but I have heard that the "wire" anti-rollbars are better than the "blade" anti-rollbars. Anyone know any better? With a wire type rollbar it's easier to make small adjustments, but you have to make sure both sides are adjusted equally. Else it will be tweaked. Also it will not respond the same when rolling left as when rolling right. IMO a torsion bar also gets tweaked easier. Small adjustments are harder to make with the blade type because it's hard to see over what angle you rotate the blade. Also the relation between angle of the blades and stiffness is not linear. But because the whole thing works like one springblade with a fixed arm length, it doesn't matter if both sides are not set equally. I use the 1/8 scale blade type adjustable rollbar from Serpent on my 705. I put my Dremel to work and narrowed the blades down to 3mm over the whole length, or it would be too stiff. Then I polished the blades to take the Hudy spring steel brown color off the rest of them too. Looks and works great! |
Just for does ho are interested the following is the weight difference for this Serpent Options:
Part Number Aluminum weight / Original weight 802155 Bracket Middle Shaft Alu 6 g / 5 g 802136 Bracket Radio plate Support Alu 14 g / 7 g 802241 Anti Roll Bar Levers Alu Orange 7 g / 4 g TOTAL 27 g / 16 g This weight is with out any screws in the original as the option parts, this could have an error of +- 1 g |
Originally posted by rcpanama Just for does ho are interested the following is the weight difference for this Serpent Options: Part Number Aluminum weight / Original weight 802155 Bracket Middle Shaft Alu 6 g / 5 g 802136 Bracket Radio plate Support Alu 14 g / 7 g 802241 Anti Roll Bar Levers Alu Orange 7 g / 4 g TOTAL 27 g / 16 g This weight is with out any screws in the original as the option parts, this could have an error of +- 1 g Strange you know, coz when you load 60-70% of 3RC option alu parts, your 710 will ended up underweight badly. The "mother snake" is only 1700 no fuel w/P Transponder. Mine, bone stock, titanium screw only on topdeck and pro wheel axles weight 1710. |
TUNED PIPE FOR THE 710
I HAVE A RB CONCEPTS X12 ENGINE I AM GONNA PUT INTO MY 710 BUT WHAT EXHAUST (PIPE)CAN I PUT IN?ANY IDEAS?THANKS KEN
|
Already posted?
Not sure if someone has already posted pictures of the new anti-roll bar fixing kit - I just found some pictures on my LHS's website:
http://www.smi-racing.de/news/images/802338.jpg Also listed are anti-roll bars of thickness 2.5mm and 3mm. The fixing kit has the number 802338 and the two new bars, 802337 Cheers, Mark. |
Originally posted by rcpanama Just for does ho are interested the following is the weight difference for this Serpent Options: Part Number Aluminum weight / Original weight 802155 Bracket Middle Shaft Alu 6 g / 5 g 802136 Bracket Radio plate Support Alu 14 g / 7 g 802241 Anti Roll Bar Levers Alu Orange 7 g / 4 g TOTAL 27 g / 16 g This weight is with out any screws in the original as the option parts, this could have an error of +- 1 g |
Re: Already posted?
Originally posted by markp27 Not sure if someone has already posted pictures of the new anti-roll bar fixing kit - I just found some pictures on my LHS's website: http://www.smi-racing.de/news/images/802338.jpg Also listed are anti-roll bars of thickness 2.5mm and 3mm. The fixing kit has the number 802338 and the two new bars, 802337 Cheers, Mark. |
Re: Re: Re: Flight plan!
Originally posted by markp27 I have four letters for you, Sow.....J...P...F...X :D :lol: Oh man you're making me nervous! I saw NiMo with his JP-Fx run and this thing not only sounded different but it is obviously as good as a standard 5-port turbo. |
Re: Re: Re: Re: Re: Re: Re: Re: Re: Re: Re: Re: Re: Re: Re: Re: rear anti-roll option
Originally posted by markp27 Oh bugger! :flaming: that was supposed to be a surprise! :cry: :lol: :lol: |
Originally posted by Proficar403 Here is my car with my new REX engine. |
Re: Re: Re: Re: Re: rear anti-roll option
Originally posted by ttso I read this thread all the way from page150, now on page230..:) I guess it will cost me least 2 more weeks before I finish everything, you guys talk too much...:p |
Re: Re: Re: Re: Re: Re: rear anti-roll option
Originally posted by cyba888 Dont waste your time reading the rest, half of it is not even rc related :lol: If you have a problem just ask, unless you are that bored to read all of the posts :D |
Re: Re: Re: Re: Re: Re: Re: rear anti-roll option
Originally posted by InitialD As they say, it takes two to tango ! :rolleyes: :lol: :lol: :lol: |
| All times are GMT -7. It is currently 11:41 AM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.