![]() |
Re: Where IS Serpent?
Originally posted by zaiguy If anyone knows....I'm actually in the Netherlands now and would love to check out the RC Mecca if permitted...... Serpent Model Racing Cars bv (Serpent MRC) PO Box 180 Heemstede 2100 AD, Noord-Holland Netherlands |
Originally posted by Sow&Steady I was lucky enough to get inivited on their opening and drove a few tanks. A lot of grip and certainly longer than it looks. My Rody was screaming by the time I reach mid-way through the straight. Originally posted by Sow&Steady Keat Seng was fastest amongst all of us ... especially in the infield. Originally posted by Sow&Steady Who won in this race? Originally posted by Sow&Steady I need to look your set-up closer ... wondering how you managed to get equal wear with those set of tyres! |
Originally posted by Profoxcg That's all it takes to fix it? lossen the pretension nut? Are you using the stock 1.7 mm softer Centax spring or are you using the 1.8 mm Centax II spring? |
Originally posted by Sow&Steady With pleasure Mark :) Let me know if you want the set-up to be diferent. Your own web space maybe? Or web journal? Own ftp account? RC Reviews at your service! :nod: |
Re: Re: Where IS Serpent?
Originally posted by InitialD RC Mecca?:eek: http://212.227.253.81/forum/images/graemlins/bow.gif Serpent Model Racing Cars bv (Serpent MRC) PO Box 180 Heemstede 2100 AD, Noord-Holland Netherlands Use this: Serpent Benelux Spaarneweg 12E Cruquius 2142 EN, Noord-Holland Netherlands Tel: +31 23 5292068 Fax: +31 23 5284950 They sometimes are testing on weekday's at the track: MACH Cruquiusweg 45 Heemstede 2100 AH, Noord-Holland Netherlands |
Re: Re: Re: Where IS Serpent?
Schrijver99, thanks for the correction. Who would better know than a guy living in Holland and playing Serpent RC cars.:D
|
D, what tyre sizes where you running front and back?
Cheers, Mark. |
Re: Re: Re: Re: Where IS Serpent?
Originally posted by InitialD Schrijver99, thanks for the correction. Who would better know than a guy living in Holland and playing Serpent RC cars.:D Sidenote: We had clubrace yesterday. Finishd 6 in C-final because of an 1st-gear that needed to be replaced just when i was leading :cry: Still good race and i'm ready for the next one. Also Julius won the A-finale :D |
Originally posted by markp27 D, what tyre sizes where you running front and back? Cheers, Mark. |
Re: Re: Re: Re: Re: Where IS Serpent?
Originally posted by Schrijver99 What we do with our rc-cars is beyond playing, i don't even call it a hobby, it's to expensive :cry: . I just think it's part of my way of living :D :eek: :sneaky: Sidenote: We had clubrace yesterday. Finishd 6 in C-final because of an 1st-gear that needed to be replaced just when i was leading :cry: Still good race and i'm ready for the next one. Also Julius won the A-finale :D Julius won again?:flaming: This is getting boring ! :lol: Hey, did Julius post any of his setups? Well, sorry to hear what had happened to you. Same thing happened to a friend of mine (same main as me) and was leading all the way when his receiver pack dump ! He did not top up before going to the 20 minute main. Me? I put in the wrong receiver pack which I thought I had already charged. It turned out it was about to dump also ! I started with already 2 laps down and shaken on the driver's stand and trying to recover from all the things that had gone through...:cry: |
Re: Re: Re: Re: Re: Where IS Serpent?
Originally posted by Schrijver99 What we do with our rc-cars is beyond playing, i don't even call it a hobby, it's to expensive :cry: . I just think it's part of my way of living :D Sidenote: We had clubrace yesterday. Finishd 6 in C-final because of an 1st-gear that needed to be replaced just when i was leading :cry: Still good race and i'm ready for the next one. Also Julius won the A-finale :D |
Kent IC Club Summer Series
We had our 1st round of the summer series this weekend, I qualified 3rd and totally kicked butt in the final with the only 710 on the track. Set-Up wise I lowered front roll centre with 4mm under pivot point, 0mm caster, 2nd hole on rear shock tower and UTI on the rear roll centre, this totally cured the off power understeer and the car was really consistent throughout the 30 min final even with heavy rear tyre wear, 42 shore front, 40 shore rear solid front axle.
This is my 1st race win and I'm still grinning now. :D :D :D :D :D :D :D :D :D I love this car!!!!!!!!! |
Re: Kent IC Club Summer Series
Originally posted by Diesel Racer I love this car!!!!!!!!! |
Re: Kent IC Club Summer Series
Originally posted by Diesel Racer We had our 1st round of the summer series this weekend, I qualified 3rd and totally kicked butt in the final with the only 710 on the track. Set-Up wise I lowered front roll centre with 4mm under pivot point, 0mm caster, 2nd hole on rear shock tower and UTI on the rear roll centre, this totally cured the off power understeer and the car was really consistent throughout the 30 min final even with heavy rear tyre wear, 42 shore front, 40 shore rear solid front axle. This is my 1st race win and I'm still grinning now. :D :D :D :D :D :D :D :D :D I love this car!!!!!!!!! |
Re: Re: Kent IC Club Summer Series
Originally posted by InitialD Congrats Diesel Racer ! :nod: Hey, mind posting your complete setup of the 710 with front solid axle? Thanks. Once I get the full final results emailed to me I'll update the setup. |
| All times are GMT -7. It is currently 04:26 PM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.