Serpent 710
Tech Addict
iTrader: (1)
DIFF!N0.1 of Poblems
Diff i cant get it tite enough so i drive like a maniac cause it slips and goes nowhere! How do i stop it by ajusting the screws they cant seem to lock it???
Re: DIFF!N0.1 of Poblems
Originally posted by Davo
Diff i cant get it tite enough so i drive like a maniac cause it slips and goes nowhere! How do i stop it by ajusting the screws they cant seem to lock it???
Diff i cant get it tite enough so i drive like a maniac cause it slips and goes nowhere! How do i stop it by ajusting the screws they cant seem to lock it???
The set screw / grub screw is suppose to lock the setting in place after you tighten the other screw on the opposite site to ensure that the diff does not slip.
New parts are in ;)
Hi guys,
do you all have still time left
vrc-cars-babes hihi
there in the pro-belts and now from a good qaulity the Pro belts
http://shop.the-border.nl/customer/p...at=487&page=14
and the adj. New Sway bar from East
http://shop.the-border.nl/customer/p...at=487&page=15
do you all have still time left
vrc-cars-babes hihi
there in the pro-belts and now from a good qaulity the Pro belts
http://shop.the-border.nl/customer/p...at=487&page=14
and the adj. New Sway bar from East
http://shop.the-border.nl/customer/p...at=487&page=15
Re: New parts are in ;)
Originally posted by border r/c
Hi guys,
do you all have still time left
vrc-cars-babes hihi
there in the pro-belts and now from a good qaulity the Pro belts
http://shop.the-border.nl/customer/p...at=487&page=14
and the adj. New Sway bar from East
http://shop.the-border.nl/customer/p...at=487&page=15
Hi guys,
do you all have still time left
vrc-cars-babes hihi
there in the pro-belts and now from a good qaulity the Pro belts
http://shop.the-border.nl/customer/p...at=487&page=14
and the adj. New Sway bar from East
http://shop.the-border.nl/customer/p...at=487&page=15
Re: New parts are in ;)
Originally posted by border r/c
Hi guys,
do you all have still time left
vrc-cars-babes hihi
there in the pro-belts and now from a good qaulity the Pro belts
http://shop.the-border.nl/customer/p...at=487&page=14
and the adj. New Sway bar from East
http://shop.the-border.nl/customer/p...at=487&page=15
Hi guys,
do you all have still time left
vrc-cars-babes hihi
there in the pro-belts and now from a good qaulity the Pro belts
http://shop.the-border.nl/customer/p...at=487&page=14
and the adj. New Sway bar from East
http://shop.the-border.nl/customer/p...at=487&page=15
Belts? Errrr ... last time I ordered them I got the standard set instead. Any chance for a swap?
Tech Elite
Mega Engine !!!
Tech Addict
iTrader: (1)
OMG!
HEY,
Nice engine man!! !!! That engine has really come up nice can u plz tell me where u got it from ?? Ive been looking for the new Mega/picco motors for ages havent found em yet just 1/8th scale ones! Is it any good does it rip up the asphalt??
Thanxz Davo
Nice engine man!! !!! That engine has really come up nice can u plz tell me where u got it from ?? Ive been looking for the new Mega/picco motors for ages havent found em yet just 1/8th scale ones! Is it any good does it rip up the asphalt??
Thanxz Davo
Re: Mega Engine !!!
Originally posted by MrChan
Hi
Hi All
Its been a while.
Has anyone ran the new mega yet? I am told mushroom will have them in next week...
Also anyone tried or have the new belts? I have some coming in the next 2 days.
Mark...I think I told you that I had a problem with the ceramic thrust bearing going, but it was not the bearing it was the clutch (my Fault) Will be trying one this week.
D...I have some ceramic balls for the diff and I noticed you run them, was there a problem with the original balls? I have found them to be excellent(original) and I know of a few people that have not liked them(ceremaic balls). 1 guy did lube them, and 2 didnt.
Its been a while.
Has anyone ran the new mega yet? I am told mushroom will have them in next week...
Also anyone tried or have the new belts? I have some coming in the next 2 days.
Mark...I think I told you that I had a problem with the ceramic thrust bearing going, but it was not the bearing it was the clutch (my Fault) Will be trying one this week.
D...I have some ceramic balls for the diff and I noticed you run them, was there a problem with the original balls? I have found them to be excellent(original) and I know of a few people that have not liked them(ceremaic balls). 1 guy did lube them, and 2 didnt.
Tech Elite
Re: Re: Mega Engine !!!
Originally posted by Sow&Steady
Hmmm, I remember some old guy complaining and swearing that he would never buy one because he didn't like the fins!
Hmmm, I remember some old guy complaining and swearing that he would never buy one because he didn't like the fins!
Not the one that u were refering !! ...
I will be running-in next week ..see how the performance would be ?
Re: Re: Re: Mega Engine !!!
Originally posted by MrChan
HA HA ..This is 1/8 engine ... the fins/ look is what i like !!
Not the one that u were refering !! ...
I will be running-in next week ..see how the performance would be ?
HA HA ..This is 1/8 engine ... the fins/ look is what i like !!
Not the one that u were refering !! ...
I will be running-in next week ..see how the performance would be ?
Re: Hi
Originally posted by Picard
D...I have some ceramic balls for the diff and I noticed you run them, was there a problem with the original balls? I have found them to be excellent(original) and I know of a few people that have not liked them(ceremaic balls). 1 guy did lube them, and 2 didnt.
D...I have some ceramic balls for the diff and I noticed you run them, was there a problem with the original balls? I have found them to be excellent(original) and I know of a few people that have not liked them(ceremaic balls). 1 guy did lube them, and 2 didnt.
Very happy with the originals. It is still as smooth as when I first bought the car. It'll last when you lube it correct. No reason for me to change to the ceramics for this one.
Tech Fanatic
Re: Re: Re: Mega Engine !!!
Originally posted by MrChan
HA HA ..This is 1/8 engine ... the fins/ look is what i like !!
Not the one that u were refering !! ...
I will be running-in next week ..see how the performance would be ?
HA HA ..This is 1/8 engine ... the fins/ look is what i like !!
Not the one that u were refering !! ...
I will be running-in next week ..see how the performance would be ?
Do they came with standard size of manifold gasket and air filter ?
Tech Elite
Re: Re: Re: Re: Mega Engine !!!
Originally posted by GoldFinger
Mr.Chan, this question might sound silly for you
Do they came with standard size of manifold gasket and air filter ?
Mr.Chan, this question might sound silly for you
Do they came with standard size of manifold gasket and air filter ?
But I got to put in the carb in place by myself .. the carb is in another plastic pack .. May be just to save some few $$ for this ...
I got the pipe also ..... The pipe did look similar to 9886 pipe but stinger is bigger about 1mm
Overall the engine look nice .......I actully want to use this engine for Serpent nitro If I'm able to attend ...
Re: Re: Re: Re: Re: Mega Engine !!!
Originally posted by MrChan
I actully want to use this engine for Serpent nitro If I'm able to attend ...
I actully want to use this engine for Serpent nitro If I'm able to attend ...