![]() |
Re: Re: Re: Re: Re: 710 Screw Count
Originally posted by InitialD I think the "problem" lies in the different servos used. Im just curious that I made a mistake. So your 710 will hit the road this sunday? This afternoon my snake will hit the road for the 1st time. 100% out of the box. BTW, Rene.. total time to build untill it hit the road is 5hr chasis kit, no shocks+elctronics. Another 5-6 hours to build it to final assembly. Plus 4 hours to make final check and setup adjusment. So its 15 hours to completely "on the road" is it still a record ?? :ha: :ha: :ha: |
Re: Re: Re: Re: Re: Re: 710 Screw Count
Originally posted by GoldFinger ...Ok Thanks for your confirmation. Im just curious that I made a mistake. Watch the neutral position of the servo-lever very carefully when mounting the servo. For Sanwa and similar servo’s the distance of the linkage of 42.4mm is correct. With KO you need to use 35-38mm length; you may need to use shorter ball-joints and or a shorter set-screws to reach this size. The leverage-hole in the radioplate may not be used completely ! That article can be found here. So what I guessed earlier could be correct and what your findings on the linkage length you ended with seemed to correlate with mytsn's statement. I guess they will update the i-manual on mystn for the 710. Originally posted by GoldFinger So your 710 will hit the road this sunday? |
Ahh thanks InitialD, I got your 710, will do the break in tomorrow.
For anyone else who wants a custom expert break in job.. please send me your 710.... Of course its free of charge:D |
Originally posted by lawndoggie Wanchai man! Those bastards only gimmie 15%.... Hey are you heading to PYC this saturday?? Comeon!!!1 |
Originally posted by utopian I have not repaired it yet and I decide to buy a new G4 as I noticed a standard G4 run fantastic at the track with knife sharp cornering performance. I'll give you pm if I go to PYC next time You can always ask lawndoggie to break in and condition the car to the track for you like what I did for mine ! :lol: :lol: :lol: |
Originally posted by utopian Go to Kowloon side and you 'll get more discount. |
Originally posted by InitialD Ummm, why buy the G4 when you can get the 710? You can always ask lawndoggie to break in and condition the car to the track for you like what I did for mine ! :lol: :lol: :lol: |
Originally posted by utopian Sorry to talk about G4 at this column as the snaker would kill me. Yeah, I'm hoping to start building the car today (not even talking about finishing it :lol: :lol: ). In any case, I'm sure you can rely on others first to give you a good review of the car.;) |
710 Photos
There are about 20 high res photos posted of the 710 in the new 'onroad' conference at Starting Grid. They're in Item #5. To get there, go to http://www.rc-racing.com, go to the conferences, go to the 'onroad' conference (otherwise known as 'sgrid8', and read item #5. That will get you the mid-size images. Click on any of them, and you'll get the full size image.
|
best place to buy?
where's the cheapest best place to get the 710 right now?
no preorders please! i want an online store that has the snakes in stock! thanks :) |
Originally posted by InitialD Naah, I believe it is your own free speech to talk about any car here as long as it is constructive, appropriate and makes sense unlike some other forums where it is taboo ! Yeah, I'm hoping to start building the car today (not even talking about finishing it :lol: :lol: ). In any case, I'm sure you can rely on others first to give you a good review of the car.;) |
Originally posted by crashed_1 :eek: Hurry up and get your butt off that chair and start wrenching...That way we can have 2 debuts tomorrow.:D |
Re: 710 Photos
Originally posted by mikemyers There are about 20 high res photos posted of the 710 in the new 'onroad' conference at Starting Grid. They're in Item #5. To get there, go to http://www.rc-racing.com, go to the conferences, go to the 'onroad' conference (otherwise known as 'sgrid8', and read item #5. That will get you the mid-size images. Click on any of them, and you'll get the full size image. |
Originally posted by spawn I hope it doesnt rain tomorrow morning when I go buy my LOTR tickets.....kekekek |
Originally posted by InitialD :flaming: What happened to the numbers I gave you for the afternoon slots? |
| All times are GMT -7. It is currently 07:49 PM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.