Infinity IF15 200mm Nitro Tourer
#91
I am after the following from JG setup sheet:
shock springs and pistons front and rear
anti roll bar - front and rear
ride height - front and rear
front - toe out, camber, castor, downstop
rear - toe in, camber, rear hub spacer, downstop
thanks,
Sam
#93
#94
Tech Regular
iTrader: (7)
Sorr
shock spring - front serpent red short spring with 2 hole piston. Rear is serpent red long spring with 2 hole piston with infinity 550cst oil front and rear.
Roll Bars - front 2mm rear 1.9mm
Ride height - 7mm front and 8mm rear
front - toe out 1, caster 4, camber 1, downstop 0
rear - toe in 3, rear hub spacer 2mm, camber 4, downstop 4.
hope this helps
happy racing
Clint
#95
Hey Sam
shock spring - front serpent red short spring with 2 hole piston. Rear is serpent red long spring with 2 hole piston with infinity 550cst oil front and rear.
Roll Bars - front 2mm rear 1.9mm
Ride height - 7mm front and 8mm rear
front - toe out 1, caster 4, camber 1, downstop 0
rear - toe in 3, rear hub spacer 2mm, camber 4, downstop 4.
hope this helps
happy racing
Clint
shock spring - front serpent red short spring with 2 hole piston. Rear is serpent red long spring with 2 hole piston with infinity 550cst oil front and rear.
Roll Bars - front 2mm rear 1.9mm
Ride height - 7mm front and 8mm rear
front - toe out 1, caster 4, camber 1, downstop 0
rear - toe in 3, rear hub spacer 2mm, camber 4, downstop 4.
hope this helps
happy racing
Clint
Legend, just what I was after!
Thanks,
Sam
#97
Tech Apprentice
- shock config: serpent red front and rear, piston std with 2mm hole
- Antiroll bar: 2mm at front and 1.9mm rear
- Ride: 7mm front - 8mm rear
- toe: 1 front - 3 rear
- camber: 1° front - 4° rear
- caster: 4mm spacer at rear
- downstop: 0 at front / 4 at rear
- rear hub spacer: 2mm
I hope this could help you!
#98
Tech Rookie
hi guys
quick question
oil on diffs...how much, did you check how many grams? on both front and rear?
thanks
quick question
oil on diffs...how much, did you check how many grams? on both front and rear?
thanks
#100
Tech Rookie
Hey mate,
since the diffs are the same a Capricorn diffs I just follow the same way that the rctarget boys build there diffs. Here is the link to the video. Pretty easy way. https://youtu.be/ob5SgKn0C9E.
hope this helps
cheers
since the diffs are the same a Capricorn diffs I just follow the same way that the rctarget boys build there diffs. Here is the link to the video. Pretty easy way. https://youtu.be/ob5SgKn0C9E.
hope this helps
cheers
thanks a lot, the video make sense without scale or anything, I also wrote to CM and Infinity, and basically they gave me the same tip lol
thanks again
#101
“Here, take a look at how our competition does it” - haha, nice approach. But hey, if you’re going to learn how to do it right, may as well learn from one of the best. DJ has been tearing it up lately. 👍🏼
#102
Hahaha.... that would be like owning a Serpent and sniffing around the Infinity thread. Different to how I've been doing it, but I'm going to give it a try.
#104
Alright, I’ll go slither back into my Snake Pit now. Happy Racing, and may we all keep it shiny side up!