Ofna Hyper8 stingray
#751
thanks wright, what about springs? you ever try using different spring combos or is it a waste of time.
#753
maybe i was not very clear earlier.....i meant clutch springs. sorry for the confusion. anyone tried using different clutch spring combos?
#754
2x1.0 & 1x1.1mm works well.
#755
Tech Elite
iTrader: (5)
Join Date: Nov 2002
Location: Coordinates - 1°21'44.88"N, 103°54'17.34"E
Posts: 3,456
Trader Rating: 5 (100%+)
Originally Posted by KK-racing
Hi guys
Came across these 2 new types of clutch shoe for Hyper8.
Anyone tried already and any comment ?.
This looks like using the real automobile clutch material
Was told these are CNC machined from the same piston's silicone aluminium ?
Came across these 2 new types of clutch shoe for Hyper8.
Anyone tried already and any comment ?.
This looks like using the real automobile clutch material
Was told these are CNC machined from the same piston's silicone aluminium ?
#756
What is every ones favorite pick for big bores on this buggy and does it need any parts other then the diff brace to make it bullet proof?
#757
The BB's of choice atm seem to be the jammin bb's off the x1crt, i use em and love em, but when there is more springs for the hyper st bb's that could change. I havnt added anything to mine to strengthen it (i will be using the +2 brace when my fr2 chassis ever arrives), ive done mods to improve things, thats it.
#758
Tech Elite
iTrader: (551)
Yep, Jammin BB with Mugen springs. I will be running mine this weekend at the RC Pro Series North race. This is my first "big" race, though the entries are about the same size as our summer racing series races. The competition should definately be tougher though.
Looking forward to the H8 with FR2 and BB, will see how the driver fares. I will let everyone know how bad I am at driving on Monday nite.
Thanks,
Casey
Looking forward to the H8 with FR2 and BB, will see how the driver fares. I will let everyone know how bad I am at driving on Monday nite.
Thanks,
Casey
#759
Tech Initiate
hi wyldthing
how much did you have to turn in low side needle on your rb s5 to get good acceleration off the line .i have my temps between 240 and 250 .i turned the low side in about half a turn from factory still seems sluggish off the line after idling for about 20 secs. i pinched the fuel line and the engine rpm increases a bit and dies about after 4 secs.
how much did you have to turn in low side needle on your rb s5 to get good acceleration off the line .i have my temps between 240 and 250 .i turned the low side in about half a turn from factory still seems sluggish off the line after idling for about 20 secs. i pinched the fuel line and the engine rpm increases a bit and dies about after 4 secs.
#760
Tech Elite
iTrader: (551)
Well guys, I just couldn't get the H8 to handle like I wanted. I tried some different stuff I the car just didn't want to settle down. I took a friends Mugen out, ran faster with it my first time driving it. So I bought a Mugen.
Hyper 8 Pro is for sale.
http://rctech.net/forum/showthread.p...34#post3292434
Good luck with the car, I know it is capable, but I just couldn't find the right set up for me.
Thanks,
Casey
Hyper 8 Pro is for sale.
http://rctech.net/forum/showthread.p...34#post3292434
Good luck with the car, I know it is capable, but I just couldn't find the right set up for me.
Thanks,
Casey
#763
Doesnt look too bad at all, is it as strong as the crowd pleazer?
Im shocked wrightcs77 All the $$ you have poured into it, good luck with the mugen man. If you dont get rid of it by the time you specified ill diffenately be interested in getting the king headz mount off you and a few other things.
Im shocked wrightcs77 All the $$ you have poured into it, good luck with the mugen man. If you dont get rid of it by the time you specified ill diffenately be interested in getting the king headz mount off you and a few other things.
Last edited by FrankBlack; 05-11-2007 at 07:16 PM.
#764
Tech Elite
iTrader: (64)
Originally Posted by rcsteve86
Looks great!!! Are the tires something new?
We havent released them yet, but they are part of our upcoming line.
[FrankBlack] -Thanks! Im sure if you order the "HD" version it will be plenty sturdy. Besides that Proline doesnt make a Hyper 8 body
#765
Originally Posted by AndyMoore
Besides that Proline doesnt make a Hyper 8 body