Graham11

iTrader: (22)

Another great move by tekno!

kpjr7321

iTrader: (7)

Do you guys think the stock ride height (35) is too low?

nmdesertracer

iTrader: (59)

Hey guys having trouble with my sons truggy not hitting his OFNA starter wheel. Hes running a os .28 motor. Looks like the flywheel is to small and the flywheel hole also. Does anyone run a bigger OD flywheel or shave down the motor mounts?

BRIAN77

iTrader: (6)

Hi guys ,, I'm thinking about getting a new Truggy and this Truggy comes to mind ,, can anyone tell me how they like it ,, I'm comming from a Kyosho strr Evo that pushes like a school buss ,, thanks Guys

XT8Truggy

iTrader: (17)

Just get it, it's the best Truggy on the market imo. Everyone says how good the MBX7T turns this Truggy has it covered in that department.

mr240

iTrader: (61)

Is it the blue box. If so. I use the same one and no problems turning the flywheel. How old is the box. Maybe the starter wheel is worn down.

RC-ZOMBIE

iTrader: (4)

Anyone try the new brake cams?

nmdesertracer

iTrader: (59)

Yeah Ofna blue box. I actually just put a new starter wheel on thinking the old one was worn down. We got a Protek sbox from a friend and that one seems to work OK not the best though. On my sons AE rc8t the ofna box worked like a champ no probs.

MX304

iTrader: (21)

The NT could turn laps inside of a school bus.

RokleM

iTrader: (33)

6 tank fresh motor and just parking lot break-ins, straight into qualifiers and pro truggy a-main. Wow, this thing is a blast to drive! I need to work on steering (pushes a bit), but that could be due to the tires. I only had some very old medium compound small pins and could have used soft or even super soft.

If you're still on the fence, I would wager a guess that you're going to love it

Torian4000

iTrader: (51)

Yes. I like 37 f&r or 37f 38r.

Torian4000

iTrader: (51)

Yes the new cams are a must have as they provide a more linear and responsive break feel. No more on or off breaks.

RC-ZOMBIE

iTrader: (4)

Thanks buddy!

vandalzzz

I suppose that a piece of fuel line on the brake linkage and some brake curve can make stock cams usable, at least i feel that on/off behavior is gone on my NB48

rceefreak

iTrader: (154)

Is the part # for the option brake cams tkr5215b?