|
HI Guys,
what is the different between the Intech BR-6 and Intech BR-6 2.0? Can i upgrade the BR6 to BR6 2.0? When Yes, which parts are needed? |
Originally Posted by rodi
(Post 13945776)
HI Guys,
what is the different between the Intech BR-6 and Intech BR-6 2.0? Can i upgrade the BR6 to BR6 2.0? When Yes, which parts are needed? 100024-1, 300029, 300031-1, 350027, and 350028 |
thx very much
|
Originally Posted by Intech BR-6
(Post 13759506)
Now in stock! - New Rear Geometry Kit for the INTECH BR-6 2.0 & BR-6E.
Part Numbers - 100142 & 100146 (must be used together). These short rear arms and 8mm offset rear upright hubs converts your stock BR-6 based Buggy into a short arm suspension geometry kit. Testing by team drivers shows that the short rear arms provide more steering, faster rotation for more corner speed, and squares up faster for more on power stability and rear forward traction on most track conditions. Exceptionally good on smaller/tight tracks with many 180's. This is a great tuning option for most US style off-road tracks, making the INTECH Buggies even better suited for all track conditions and easier to get Dialed in! *When installing on BR-6/BR-6E, use the outer hinge pin hole on the arm and the inner hing pin hole on the uprights. This keeps the overall width the same as the stock arms but changes the rear roll center and pivot points for increased performance on many tracks. http://fbcdn-sphotos-f-a.akamaihd.ne...01055725_o.jpg |
Originally Posted by nosepick
(Post 13959822)
Are those driveshaft boots in the shocks? I have to try that, pretty good idea!
|
|
|
Body
Originally Posted by rc_cal
(Post 11492025)
newly painted shell for my BR6....
http://www.rctech.net/forum/attachme...1&d=1354124768 http://www.rctech.net/forum/attachme...1&d=1354124780 http://www.rctech.net/forum/attachme...1&d=1354124804 http://www.rctech.net/forum/attachme...1&d=1354124818 http://www.rctech.net/forum/attachme...1&d=1354124832 |
[QUOTE=[/QUOTE]
the short rear arm looks like a great update.. but unfortunately i cant get the parts here in my country, does dialed hobby do shipment to Malaysia? |
Originally Posted by jhold87
(Post 13962469)
What body is this?
i'm using the same body shell, but i got issue on the throttle servo horn.. the linkage for the throttle scuffing the body when i pull the the throttle. but can get over this by raising the rear body mount by 4-5mm.. hope that helps.. |
Originally Posted by mozo_85
(Post 13962871)
the short rear arm looks like a great update.. but unfortunately i cant get the parts here in my country, does dialed hobby do shipment to Malaysia?
|
Originally Posted by Intech BR-6
(Post 13963124)
Just have your local INTECH supplier order parts 100142 and 100146. That is all you need.
|
Originally Posted by mozo_85
(Post 13964462)
I got limited support from my local supplier, and they are not restocking parts.. I cant even get a 2.4mm rear anti roll bar here. :cry:
|
Intech Racing USA won at the Central Florida Series
In 1/8th Nitro Buggy Class, Joey "Batman" Perez takes the win at the Central Florida Series with the INTECH Racing BR-6 2.0 Buggy! Kyle Conover brought home 3rd also with the INTECH BR-6.
http://www.intechracing.com/gct_admi...5417516412.jpg |
Originally Posted by Intech BR-6
(Post 13959846)
http://scontent-atl.xx.fbcdn.net/hph...43967420_o.jpg
http://scontent-atl.xx.fbcdn.net/hph...25&oe=55B07B23 http://scontent-atl.xx.fbcdn.net/hph...27725780_o.jpg https://scontent-atl.xx.fbcdn.net/hp...93&oe=55E5952B http://fbcdn-sphotos-b-a.akamaihd.ne...34528638_o.jpg Just tried the short boots in the front shocks, they work great! I will be using them in my shocks from now on. Is that the new 4mm chassis in your car? how are you liking it so far? |
| All times are GMT -7. It is currently 08:09 PM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.