1.5 in rear toe ? that is 4°

According to the plate that would be 4.5 but when I measure it, it looked to be less. I am using 1.25 inserts in my buggy now and it has never been better.

So he is using "positive" antisquat or I misread the sheet?

no almost lowest, insert 1 to the bottom

1' anti-squat which is the 1 down pill.

.............

Got it, thanks guys

Making up a new setup page with antisquat markings..

So there is no real chart for the antisquat? I know the pill says 1 down but what would the real antisquat value be then?

tomorrow..

buggy setup
 

This looks like a great setup it's going on my buggy asap .can't wait to try it out.

Inserts or Degree
 

Ok I'm very confused now. Are you speaking of insert or degree of angle when referring to 1' = 1 down pill? 1.25 is the angle of degree so that would be insert 0.25 for the front as 1.5 would be degree and insert -1 for rear correct.

antisquatplate is 1 to 3 degrees
so 2 degrees, in the middle = insert 0
going down on inserts you get :

2° - 0.25 = 1.75°
2° - 0.50 = 1.5°
2° - 0.75 = 1.25°
2° - 1.00 = 1°
2° - 1.25 = 0.75°
2° - 1.50 = 0.50°

going up you get :

2° + 0.25 = 2.25°
2° + 0.50 = 2.50°
2° + 0.75 = 2.75°
2° + 1.00 = 3°
2° + 1.25 = 3.25°
2° + 1.50 = 3.50°

same goes for the other charts..
I included an antisquat chart and new front plate here in my blanc 2.0 set-up page :

http://abload.de/img/br6xxxxfinalvvvigu70.jpg

1 down = 1' anti
0 = 2' anti
1 up = 3' anti

Makes more sense now, my antisquat setting was way off. Thanks