RC8/RC8T laid down shocks
#1
RC8/RC8T laid down shocks
I notice the shocks on the RC8/RC8T are considerably more angled (laid down) than those of other brands buggies and truggies. The original RC8 FT was really laid down and the "B" version has redesigned shock towers for more adjustments which include using less angle. Even with the new towers, the shocks still aren't as close to vertical as other brands (HB, Losi, Tamiya, etc.). I know moving the shocks to have more of an angle makes for more of a progressive suspension feel, but it seems more linear would be better. Anyone have any feedback on the pros or cons of AE's shock layout design vs. that of all the other brands?
#2
but it seems more linear would be better.
Dialed for the most part.
#4
i got the RC8T FT & i never bother the shocks (angle position) ,as stated earlier "AE buggy/truggy steer like no other
#5
If I touch mine, I just go maybe 1 down or up from factory. I might try to raise rear only to see how it affects traction though.
#6
how does the rc8t jump, and handle compared to a eight truggy ?
i might be getting a rc8t next year . i know you said it steers really good does it have too much ?
or can you change it to not to that ?
#7
yes ,you can change (14/16/18 deg. caster) it all depends on your driving style & of course the race track that you're racing ........the stock set-up will probably impress you ,steering is great but the rear-end is just loose & then you need to work on your differential set-up .....again it all depends on your liking & what race track are you racing ,another factor is the tires , a good torque servo ......hope it helps
#8
i have seen the eight T , but i never tried one ...
yes ,you can change (14/16/18 deg. caster) it all depends on your driving style & of course the race track that you're racing ........the stock set-up will probably impress you ,steering is great but the rear-end is just loose & then you need to work on your differential set-up .....again it all depends on your liking & what race track are you racing ,another factor is the tires , a good torque servo ......hope it helps
yes ,you can change (14/16/18 deg. caster) it all depends on your driving style & of course the race track that you're racing ........the stock set-up will probably impress you ,steering is great but the rear-end is just loose & then you need to work on your differential set-up .....again it all depends on your liking & what race track are you racing ,another factor is the tires , a good torque servo ......hope it helps
well if i do get the rc8t i am gone to get the one with the big bore shocks of course.
well im kind of used, to the rear end twichy and sliding on my eight-t
but i am changeing the setup on it.
is the rc8t jump, pretty level and whats the weak points and wear ?
i do know somebody who, runs a rc8t without the big bore shocks and its not the greatest at least on a rough track lol.
he said he likes. i do race on rough rutty track by the way.
#9
Tech Elite
iTrader: (148)
The RC8 platform steers. ALOT.
Our local AE factory guy obviously loves the truck, but he says it breaks a lot. I considered leaving Mugen for an AE. Parts support is great. It handles very well. I picked up a friends AE and turned some pretty fast and consistent laps. It just steers!
BUT, my main concern was that it breaks. Dont yell at me, as I dont know first hand. That is just coming from a factory AE guy.
Our local AE factory guy obviously loves the truck, but he says it breaks a lot. I considered leaving Mugen for an AE. Parts support is great. It handles very well. I picked up a friends AE and turned some pretty fast and consistent laps. It just steers!
BUT, my main concern was that it breaks. Dont yell at me, as I dont know first hand. That is just coming from a factory AE guy.
#10
The RC8 platform steers. ALOT.
Our local AE factory guy obviously loves the truck, but he says it breaks a lot. I considered leaving Mugen for an AE. Parts support is great. It handles very well. I picked up a friends AE and turned some pretty fast and consistent laps. It just steers!
BUT, my main concern was that it breaks. Dont yell at me, as I dont know first hand. That is just coming from a factory AE guy.
Our local AE factory guy obviously loves the truck, but he says it breaks a lot. I considered leaving Mugen for an AE. Parts support is great. It handles very well. I picked up a friends AE and turned some pretty fast and consistent laps. It just steers!
BUT, my main concern was that it breaks. Dont yell at me, as I dont know first hand. That is just coming from a factory AE guy.
is this the new rc8t with, the big bores and all the hop ups that breaks alot ?
#12
I learned to drive with my rc8b and during the process crashed and flipped a lot and cartwheeled it to death and only broke a shock standoff bolt. The only other thing I have had an issue with after a bad cartwheel is the rear hinge pins bending. Replaced with steel ones no more issues now. That is the buggy though. This was mainly on hard clay. The normal rc8 had issues. Can't speak for truggy either
#13
Tech Master
iTrader: (3)
I think it's a tough machine. The rod ends break after a couple of gallons if you have several hard landings, and the rear uprights should be replaced with aluminum, and it's tough as nails as far as I'm concerned.
I use LST2 rod-ends on my TBs and they seem to be quite durable.
I use LST2 rod-ends on my TBs and they seem to be quite durable.
#14
#15
I drive the Rc8t and even the RTR RS i bought has the big bores all the truggys do now. If you get the pre built RTR or the half built CE make sure you rebuild and locktite for sure. Other than that the CVA's bend but I just bend them back and they're fine I'll even race with slightly tweaked ones. The drivetrain is tough in this thing even with slop in it.... If you have the money buy the kit over the RTR tho for sure. You'll be happier with it!