Hobby Pro USA

He used the RC Monster battery tray because the Agama tray did not fit the R4 chassis.

Panic09

iTrader: (6)

Is there any video around of kortz driving the A8 at the Nitro challenge?

Hobby Pro USA

http://www.vp-pro-usa.com/news/31-general/283-dnc.html

TeamKM

no e-buggy final video?

slashracer111

iTrader: (25)

My new kits came in the mail today! Running the A8 and the RC-Monster converted A8e for the 2012 season.

I'm really impressed with the build quality so far. Hopefully I'll have the electric buggy ready for a practice run at The Warehouse this Saturday. One buggy almost down, and another waiting to be built and broken in.

Ready to go!

-Hunter

BMenard17

iTrader: (88)

I'm ready to buy two new bodies, one e body and the nitro body but is the agama e body ready for purchase also are there any coupon codes available.

Waflet

iTrader: (35)

Hideeho
You suck hunter!
Alan got my buggy in, but no e conversion. Hopefully it will be in in a day or 2.

What kind of setup are you going to start with.

Also, who's going to open the track Saturday? Alan is off to another race this weekend.

Waflet

iTrader: (35)

Hideeho
I built the 1st dif last night & it has a little more play in it than I would like. What size shims should I get for the out drives? What other shims can I expect to need for the rest of the car? I'll be stopping by my lhs after work to pick them up.

TIA

ABURTON

iTrader: (24)

Bill, play on the ring/pinion gear? play where? Maybe when you push and pull the outdrives? That's normal don't shim it tight. I'll be glad to look at it. Make sure to text me if you have questions.

Hobby Pro USA

I shim the outdrives with 0013 shims. 3 on the center diff outdrives usually.
I also add an extra 0014 to both the front and rear diff to get rid of side to side play in the ring & pinion. But each diff is slightly different, so shim as needed.

Waflet

iTrader: (35)

hideeho
I didnt get started till late last night, so I only built 1 dif (no oil yet, just test fitting). The outdrives seem to have too much play to me. Push on them & they are absolutely to tight. Pull on them & they seem about right (light, but no discernable extra lash).

Alan, if you are going to be at the track I would love to swing by & let you take a look @ them!

Hobby Pro USA

Remove a 0013 shim and put it on the outside of the diff outdrive.

lee_double2000

iTrader: (46)

here is a video of Kortz driving at the 2012 Dirt Nitro challenge

http://vimeo.com/37600073

lee_double2000

iTrader: (46)

Here is his interview also at the 2012 Dirt Nitro Challenge

http://vimeo.com/37671679

jbranham50

iTrader: (1)

Good luck to all the Agama's headed out to PNB! Someone please help Gene and make sure he is going the right direction on the track, thanks! Lol