Chad Phillips

yes but it would be worth it just to get quarts and i will get you a good price.. gallons have hazmat charges..

i tried that fuel tonight.. i had been running losi fuel.... when i put the speed blend in.. my car wouldnt even move.. i had to lean the needles 3 hours on bottom and top LOL.. i will be running this fuel at motorama..

nitro rat

iTrader: (5)

different? How so?

Chad Phillips

its been chopanesed!

lol

jkirkwood

iTrader: (8)

QFT

porkchop

dry build the diffs and cheek the mesh insted of opening them i keep going and then when i get to the shocks i stop tear it all the way down again and fill the diffs gresse the gears and then i do my shocks

as for chad and jared shove it guys

Jonathan Bell

iTrader: (15)

speed blend FTW!!!

heavyjeffd

iTrader: (15)

Chad: Any ETA on when the front/rear aluminum hub carriers will be available?

Impatiently waiting for both.

HPC

HI Chad.

What is the effect of running the spindle high or low?

Thanks!!

Demos

Guys i have a question what will be the affect of the option brackets #600267 , #600308 on the car? And also which caster block is better the 10 deg or the 12 deg.

OBMIT

Hey Guys

I have been mulling over a new Buggy for some time now with all the new variations available. I always liked the Serpent when released and always kept coming back to the 811 so I have decided to go with a Serpent for 2011.

I had a very productive season last year and hope to make it a bigger and better 2011.

My home track is OCR raceway www.ocrraceway.com in Darwin the Northern Territory of Australia. There's some great support on here and I'm excited on sharing with you guys Serpent success in Australia.

Will keep in touch and a detailed photo build will follow.

Kind Regards

Tim Nicol

Here is a pic from the first round of 2010

Tim Nicol
Tony Kanuth
Skip Jackson

Chad Phillips

rear hub carriers today.. no clue on front ones..

Chad Phillips

I never tried that on my 1/8 but when i ran 1/10 off road back in the day, I would run my spindles raised on high bite tracks..

Chad Phillips

run the 600267..

havent tried 12 but will soon

jkirkwood

iTrader: (8)

I moved it to high at CRCRC's race to smooth out the steering. I did this with another change so I can't say how much it affected the car but the group of changes I made was pretty good.

I felt the 12 deg spindle took away a bit mid corner steering but added a huge amount of on power steering. As for which is better I think it's situational.

The 600267 rear bracket lowers the roll center of the car vs the standard one. It does a number of things but basically more roll will be added to that end of the car.

Honu

iTrader: (22)

What is the rate of the clutch springs that come with the kit?