neobart

iTrader: (4)

Do they work with the Losi nuts? I know Jammin hexes have a bigger thread size than Losi.

Frank L

iTrader: (148)

Yep same nut and same pin that goes through it. I know jammin and the k car are different thread but Most of the others are like losi.

neobart

iTrader: (4)

Cool, now I know what to put in the basket next time I order.

Bman's 3XNT

iTrader: (71)

Does anyone not run a front sway bar? What was the effect of the handling? Thanks....

MaSt

what kind of paper i need to use to set up gear mesh?

JAMMINKRAZY

iTrader: (17)

I use a strip of a plastic parts bag. It will set the mesh a bit looser than using a piece of paper.

air8

iTrader: (7)

I usually don't run a front sway bar on buggy or truggy. On the large outdoor tracks the traction isn't there for quick turn in. So I remove the sway bar in front. Try it and see how you like it.

tc5 man

how is the truggy without the front swaybar? is it good on a rough blown out outdoor track? im ammusing though that, if you remove the front sway bar there will be more roll.

Bman's 3XNT

iTrader: (71)

I just got back from my local outdoor track, and all I can say is wow! What a difference. I finally found what I was looking for. I can really get the truck to rotate with the new tower and no front swaybar. A little counter turn into the corner stab the brakes and your wheeling it sideways around those hairpins.........This is also in an E truggy.

reggie l.

iTrader: (4)

why does it take the slop out?...whats so different ?

bigjayjay1

iTrader: (86)

I use a business card

Shuming

i use just a pc of the plastic from the parts bag.

l3asher

iTrader: (2)

I do it by feel.

Integra

iTrader: (8)

X2

cornerspeed

X3