Kyosho SP2 WC Edition
06-05-2007, 10:01 PM
#1
Kyosho SP2 WC Edition
Here's the official SP2/WC thread. I'll put Cody King's setup at the top. 
Cody King SP2/WC Set Up
Front
-------
5000 diff oil
shock oil: Kyosho 700
white pistons (1.4)
dark blue SP2 springs
shock positions: middle hole in tower/inside on arm
22* caster block/camber link in middle hole
Short upper arm (IF-329) with long ball cup
L & A block
std sway bar/balls all the way out
arms well above level
steering in middle hole on ackerman plate
droop limited 1 full turn
-2* camber/2*toe out
Center
--------
7000 diff oil
48 tooth spur/14 tooth bell
3 shoe clutch - 2 carbon, 1 aluminum - 1.0 springs
Rear
------
Kyosho 1300 diff oil
shock oil: Kyosho 400
White pistons (1.4)
std rear sway bar/balls all the way out
2 deg anti squat
3 deg toe
hubs 2/3 forward
camber link long and in lower hole (#6) on tower
shock positions: middle upper hole in tower/inside on arm
light blue SP1 springs
arms just above level
droop slightly limited
-2* camber
Cody King SP2/WC Set Up
Front
-------
5000 diff oil
shock oil: Kyosho 700
white pistons (1.4)
dark blue SP2 springs
shock positions: middle hole in tower/inside on arm
22* caster block/camber link in middle hole
Short upper arm (IF-329) with long ball cup
L & A block
std sway bar/balls all the way out
arms well above level
steering in middle hole on ackerman plate
droop limited 1 full turn
-2* camber/2*toe out
Center
--------
7000 diff oil
48 tooth spur/14 tooth bell
3 shoe clutch - 2 carbon, 1 aluminum - 1.0 springs
Rear
------
Kyosho 1300 diff oil
shock oil: Kyosho 400
White pistons (1.4)
std rear sway bar/balls all the way out
2 deg anti squat
3 deg toe
hubs 2/3 forward
camber link long and in lower hole (#6) on tower
shock positions: middle upper hole in tower/inside on arm
light blue SP1 springs
arms just above level
droop slightly limited
-2* camber
how much are they worth now?
06-27-2007, 09:00 PM
#4
Heard from reliable source a totally new buggy would be out this Dec 2007.
Guess they should be doing away with their traditional e-clips in this model.
Guess they should be doing away with their traditional e-clips in this model.
06-28-2007, 07:50 PM
#6
??. No more those MP777 SP1, SP2, WC, blah, blah, blah.......this part upgrade, that part changed.
06-28-2007, 11:43 PM
#7
mp6, mp7, mp7.5,mp 7.5 k1, k2, k3, mp777, sp1, sp2, wc etc........................
What makes you think the mp8 won't be changed every 4 months like every other car? Maybe sooner with Losi on board now.
What makes you think the mp8 won't be changed every 4 months like every other car? Maybe sooner with Losi on board now.
06-29-2007, 12:29 AM
#8
Kyosho has come a long way & I won't argue the 8 series will not have any changes down the road after it is launched. That's part & parcel of product improvement for the consumers benefit. In the first place I didn't even says that, but that MP8 will be a totally new design & not a continuation of the MP777's series upgrade.
06-29-2007, 08:29 AM
#10
Burns, Inferno, Inferno DX, MP5, mp6, mp7, mp7.5,mp 7.5 k1, k2, k3, mp777, sp1, sp2, wc etc........................
Kyosho has come a long way & I won't argue the 8 series will not have any changes down the road after it is launched. That's part & parcel of product improvement for the consumers benefit. In the first place I didn't even says that, but that MP8 will be a totally new design & not a continuation of the MP777's series upgrade.
Kyosho has come a long way & I won't argue the 8 series will not have any changes down the road after it is launched. That's part & parcel of product improvement for the consumers benefit. In the first place I didn't even says that, but that MP8 will be a totally new design & not a continuation of the MP777's series upgrade.
How "new" can a design get? The only real challengers ( that I know of) to the typical 1/8 buggy have been the TTR S3 with the extruded chassis and the Losi.
06-30-2007, 07:51 AM
#11
setup
The setup at the top of the thread what type of track is this for.Ie clay ,blue groove,sandy based etc
06-30-2007, 07:54 AM
#12
setup
im also after a grass setup if someone has one
07-01-2007, 09:46 AM
#13
Tech Regular
How much is really missing from a SP2 kit over a WC ?
A shop has a deal on an old kit and I can't make up my mind about it !
A shop has a deal on an old kit and I can't make up my mind about it !
07-02-2007, 01:26 AM
#14
sp2
honestly not much at all.Its mainly small changes here and there.Some are cosmetic.If its cheap grab it you can always add some wc bits to it.
