CEN Matrix TR
#691
I am about to get a new TR FRE, should I look into buying a set of turnbuckles ? If so, could you point me a code for that ?
Thankx!
#693
Tech Apprentice
Guys,
Im almost done building my TR FRE except for radio tray, linkage and engine.. Im really impress on this truck, it feels and looks WAY more expensive than what I payed for it..
Anyway, anybody know where these 3 post like, aluminum gun metal in color and maybe about an inch in size go into? The manual does not have any info on these thing and I just wanted to make sure everything is where it should be.
Thanks,
Im almost done building my TR FRE except for radio tray, linkage and engine.. Im really impress on this truck, it feels and looks WAY more expensive than what I payed for it..
Anyway, anybody know where these 3 post like, aluminum gun metal in color and maybe about an inch in size go into? The manual does not have any info on these thing and I just wanted to make sure everything is where it should be.
Thanks,
#695
Tech Master
iTrader: (33)
Gene You still got the diff pin conversion in stock.... I would like to get a kit..
( I was dead set on keeping the LSD's but I just drove a cen with Kyosho diffs in it and WOW!!! Buttery smooth...) I still think Im gunna run the front LSD..
A good Set up for those diffs with the cross pins.. would be
80wght up front (lsd), 7-10 center, and 2-3 rear ?
Thanks for all the help..
( I was dead set on keeping the LSD's but I just drove a cen with Kyosho diffs in it and WOW!!! Buttery smooth...) I still think Im gunna run the front LSD..
A good Set up for those diffs with the cross pins.. would be
80wght up front (lsd), 7-10 center, and 2-3 rear ?
Thanks for all the help..
#696
Tech Apprentice
#697
Tech Master
Not unless you drill new holes in the chassis.
I do have turnbuckles and cross pink kits in stock.
Cross pins
tr turnbuckles
buggy trunbuckles
I do have turnbuckles and cross pink kits in stock.
Cross pins
tr turnbuckles
buggy trunbuckles
#698
cnc beel crank
has the cnc servo bell crank come in yet?
#699
Tech Master
#700
Tech Apprentice
Does anyone know if the front CVD axel from the Kyosho ST-R would fit into the Matrix knuckles?
Thanks..
Thanks..
#701
Tech Master
Only if you grind the caster blocks. The universals will hit.
#702
Cen matrix tr truggy 4 sale
I am selling my matrix tr truggy because I am going to get there buggy and I do not like running 2 classes so I am selling my matrix tr truggy with a mach 427 that has almost three gallons on it and I am selling it with a ton of parts. Here is the link of where I am selling it and where you can find pictures of it,information on it,how to contact me if you have any questions. Link:
http://lstforums.com/forums/viewtopic.php?f=14&t=9435
Thank you
http://lstforums.com/forums/viewtopic.php?f=14&t=9435
Thank you
#703
I have been having trouble with bubbles in my fuel line. I just did a rebuild and put in a brand new tank and new fuel line and still have air in the line. The bubbles are in the line before and after the fuel filter. Any ideas?
#705
Does the CNC knuckles comes standard with the TR FTE?